Skip to main content Skip to search Skip to main navigation

Balluff BES0068 inductive sensor, M12, Sn 4 mm, PNP normally open contact, M12 connector

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Balluff BES0068 inductive sensor, M12, Sn 4 mm, PNP normally open contact, M12 connector"

The Balluff BES0068, with the type designation BES M12MI-PSC40B-S04G, is an inductive sensor with an M12x1 thread and a total length of 65 mm. It can be flush-mounted and has a rated switching distance (Sn) of 4 mm with a assured switching distance (Sa) of 3.2 mm. The switching output is a PNP normally open contact, and the switching frequency is 2,500 Hz. It operates on 10 to 30 V DC, with a rated operating current of 200 mA. Connection is via a 3-pin, A-coded M12x1 connector. The housing is made of nickel-free coated brass, the active surface is made of PBT, and the protection rating is IP68.

Technical data

Design / SizeM12x1, Ø 12 x 65 mm
Installation typeflush-mounted
Rated switching distance Sn4 mm (assured switching distance Sa 3.2 mm)
Real switching distance Sr4 mm, tolerance ±10 %
Repeatability / Hysteresis / Temperature driftmaximum 5 % / 15 % / 10 % (in each case of Sr)
Switching outputPNP normally open (NO)
Switching frequency2,500 Hz
Operating voltage Ub10 to 30 V DC (rated operating voltage Ue 24 V DC)
Rated operating current Ie200 mA, utilisation category DC-13
Voltage drop / residual currentstatic: maximum 1.5 V / maximum 10 µA
Delay before availability tvmaximum 35 ms
Protection classII
ConnectionM12x1 plug, 3-pin, A-coded
Housing materialBrass, nickel-free coating
Active areaPBT
Protection ratingIP68
Ambient temperature-25 to +70 °C
Shock / VibrationHalf-sine 30 g, 11 ms (EN 60068-2-27) / 55 Hz, amplitude 1 mm, 3 x 30 min (EN 60068-2-6)
Evidence of conformityCE, UKCA, cULus
Scope of deliverySensor

Application and use

M12 inductive sensors detect metallic parts without contact and are used in conveyor systems, machine tools and assembly lines to detect the presence, end position or position of components. ‘Flush-mounted’ means, in the case of the BES0068, that the active surface may sit flush with a metallic mounting bracket. The data sheet specifies a function indicator but not a supply voltage indicator.

A cable with an M12 socket, 3-pin and A-coded, is required for connection. The data sheet specifies short-circuit protection, reverse polarity protection and protection against incorrect terminal connection. Once the overload has been rectified, the sensor is operational again. In relation to the real switching distance Sr (4 mm, tolerance ±10 %), the repeatability is a maximum of 5 %, the hysteresis a maximum of 15 % and the temperature drift a maximum of 10 %. The data sheet specifies a tightening torque of 10 Nm. The utilisation category is specified as DC-13, and the pollution degree is 3.

Connection: M12 connector
Contacts: 1 NO contact
Degree of protection (IP): IP68
Design: M12
Installation type: flush
Output: PNP
Product type: Inductive sensor
Switching distance: 4 mm