Skip to main content Skip to search Skip to main navigation

Binder FD 56 drying and heating oven with forced air circulation, 60 l, up to 300 °C, 9010-0303

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Binder FD 56 drying and heating oven with forced air circulation, 60 l, up to 300 °C, 9010-0303"

The Binder FD 56 drying oven from the Avantgarde.Line FD series is a drying and heating oven with forced air circulation, designed for applications requiring particularly rapid drying and sterilisation. With a usable volume of 60 litres and a temperature range from 10 °C above ambient temperature up to 300 °C, this compact benchtop unit is equally suitable for daily laboratory routines and for specific sterilisation processes.

Rapid heating thanks to a powerful fan

A powerful fan, combined with APT.line technology, ensures uniform temperature distribution throughout the entire interior. At 150 °C, the FD 56 achieves a spatial temperature deviation of ± 1.7 K and a temporal deviation of ± 0.3 K. The heating time to 150 °C is just 15 minutes. With an air change rate of 80 times per hour at 100 °C, rapid, uniform drying is achieved even with a dense load.

Operation and features in everyday laboratory use

The FD 56 is controlled via a controller with an LCD display; the exhaust air flap is controlled electromechanically and can thus be adapted to the respective drying or sterilisation process. The sound pressure level is 43 dB(A) and the energy consumption is 290 Wh/h at 150 °C.

Typical applications

  • Drying of laboratory glassware and sample material in routine laboratory work
  • Sterilisation processes in quality assurance and research
  • Rapid heat treatment of small to medium-sized batches
  • Complementary unit to larger drying and heating ovens

For laboratories that regularly need to dry small to medium quantities of glassware or sample material, the FD 56 combines short heating times with a compact footprint, without compromising on temperature accuracy.

Technical details

Temperature range10 °C above ambient temperature to 300 °C
Usable volume60 l
Spatial temperature deviation (at 150 °C)± 1.7 K
Temporal temperature deviation (at 150 °C)± 0.3 K
Heating time to 150 °C15 min
Air change rate (at 100 °C)80 times/h
Energy consumption at 150 °C290 Wh/h
Sound pressure level43 dB(A)
Rated voltage230 V (also available in a 120 V version)
Rated power1.1 kW
External dimensions (W x H x D)560 x 625 x 565 mm

Scope of delivery

  • 1x Binder FD 56 drying and heating oven, 230 V (9010-0303)
  • Standard grid shelves
  • Operating instructions

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, BINDER GmbH, is DE 37004983. Information on the return of old appliances can be found on our page Environment and disposal.

Individual requirements & procurement service

Further accessories are available for the FD 56, such as additional grid shelves, calibration certificates and maintenance contracts of varying scope. Do you require bespoke configurations, spare parts or advice on selecting the right drying oven for your application? We will be happy to assist you via our procurement service.

Selection guide within the range

BINDER’s Avantgarde.Line FD range with forced air circulation comprises five sizes. All share the same temperature range, LCD controller and electromechanically controlled exhaust air flap, but differ significantly in terms of usable volume and footprint.

ModelUsable volumeExternal dimensions (W x D x H)
FD 23 (9010-0194)20 l435 x 520 x 495 mm
FD 56 (9010-0303)60 l560 x 565 x 625 mm
FD 115 (9010-0305)116 l710 x 605 x 735 mm
FD 260 (9010-0309)259 l810 x 825 x 940 mm
FD 720 (9010-0311)741 l1,165 x 870 x 1,590 mm

The FD 56 described here, with a capacity of 60 litres, is suitable as a supplementary unit for small to medium-sized batches. If this volume is insufficient, the FD 115 with a 116-litre capacity is the next size up; for significantly larger quantities, the FD 260 with a 259-litre capacity or the FD 720 with a 741-litre capacity are available for large-scale applications. At the lower end of the range is the compact FD 23 model with a 20-litre capacity, designed for very small sample volumes and a minimal footprint.

Distinction from natural convection, Solid.Line and the FP and M equipment variants

The FD 56 operates with forced air circulation. Its counterpart with natural convection is the ED 56: without an active fan, heating up takes considerably longer, but air movement inside the chamber remains minimal, which is advantageous for some samples. Those on a tighter budget who are satisfied with a temperature range up to 250 °C and a simpler timer controller without an LCD display will find the FD-S 56 from the Solid.Line range to be the more economical alternative with a comparable usable volume.

If additional programmable temperature and time profiles are required, BINDER offers two higher-specification models above the FD 56 in size 56: the FP series (forced air circulation with programme functions) and the M series (forced air circulation with extensive programme functions), designated as the FP 56 and M 56 respectively. BINDER also uses the designation Classic.Line for certain smaller models. An overview of the entire BINDER range can be found in the ‘Climate Chambers & Incubators’ category.

Application, operation and maintenance

The heating time to 150 °C is just 15 minutes; the spatial temperature deviation is ± 1.7 K and the temporal deviation is ± 0.3 K. With an air exchange rate of 80 times per hour at 100 °C, rapid, uniform drying is achieved even with a dense load. The sound pressure level of 43 dB(A) must be taken into account when installing the unit in a laboratory, particularly if it is in continuous operation in the immediate vicinity of workstations. The rated power of 1.1 kW is on a par with comparable forced air circulation drying cabinets of this size and must be taken into account when fusing the electrical circuit.

Standard, non-abrasive laboratory cleaning products are suitable for maintaining the interior; we advise against the use of abrasive or chlorine-based agents. Calibration is recommended for the regular checking of temperature accuracy; we arrange suitable calibration certificates via our procurement service.

Investment rationale: When forced air circulation is sufficient, and when programme functions or natural convection are advisable

For day-to-day laboratory routines involving recurring drying and sterilisation processes at a constant setpoint temperature, the FD 56 with its LCD controller reliably meets these requirements. If, on the other hand, multi-stage temperature profiles need to be run automatically and repeatably, the FP 56 or M 56 come into consideration. If air movement inside the chamber is undesirable, the ED 56 with natural convection is the only option, even if this means accepting longer heating-up times. If a temperature range up to 250 °C is sufficient, the FD-S 56 from the Solid.Line range offers additional savings on the initial purchase cost, without compromising performance for most routine applications in drying and heat treatment.

For higher loading densities, additional grid shelves are available as accessories, as are calibration certificates and maintenance contracts of varying scope; both can be obtained via our procurement service.

Frequently asked questions about the Binder FD 56

What is the usable volume of the FD 56?
60 litres, with external dimensions of 560 x 625 x 565 mm.

What distinguishes the FD 56 from the ED 56 with natural convection?
The FD 56 uses forced air circulation and therefore heats up significantly faster than the ED 56, which operates without a fan and avoids air movement inside the chamber.

What distinguishes the FD 56 from the FD-S 56 in the Solid.Line range?
The FD-S 56 covers a temperature range up to 250 °C and is controlled via a simpler timer controller; the FD 56 reaches up to 300 °C and features an LCD display.

Is the FD 56 suitable for sterilisation processes?
Yes, the temperature range up to 300 °C and the rapid, uniform forced air circulation heating make it suitable for sterilisation processes in quality assurance and research.

How loud is the FD 56 when in operation?
The sound pressure level is 43 dB(A).

Is the FD 56 also available with a 120 V connection?
Yes, in addition to the 230 V version, the unit is also available as a 120 V variant.

What is included in the scope of delivery?
The FD 56 (9010-0303), standard grid shelves and the operating instructions.

Certification marks: GS (VDE)
Volume: 60 l