Bürkle SiloPicker silo sampler, V4A stainless steel, 1,200 mm penetration depth, 5340-1100
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Bürkle SiloPicker silo sampler, V4A stainless steel, 1,200 mm penetration depth, 5340-1100"
Grain, animal feed or chemical powders stored in a silo for months undergo different changes depending on their depth. Moisture sinks downwards, heat builds up in the centre, and pest infestation often begins in one spot before spreading later on. The SiloPicker from Bürkle penetrates up to 1,200 millimetres deep into a silo or other storage container and extracts the material specifically from that depth, rather than simply taking a sample from the surface. A surface-only sample would not reveal these differences between the layers at all.
1,200 millimetres penetration depth, two collection openings
With a total length of 1,300 millimetres and an external diameter of 50 millimetres, the SiloPicker reaches significantly deeper into a container than the shorter Bürkle samplers for drums and cartons. Two collection openings hold a combined total of 100 millilitres of sample material, with the collection chamber starting at a penetration depth of 143 millimetres. This design makes the device a target-point sampler, which collects specifically from a particular layer rather than across the entire penetration depth, which is what distinguishes it from a continuous lance.
For free-flowing bulk materials
The SiloPicker is designed for free-flowing materials that flow freely around the unit, such as cereal grains, pellets or fine-grained chemical powders. In the case of materials that stick together or form lumps, which tend to compact rather than be displaced when pierced, this design reaches its limits; in such cases, a device with an actively scraping opening is more suitable. It is therefore worth taking a quick look at the flow properties of the stored material before using the device for the first time.
Representative sampling across several target points
As with any target-point sampler, a single puncture only captures one position within the silo. To obtain a reliable picture of the entire stock, multiple punctures are needed at different locations and depths; taken together, the results give a picture of the storage. The 100-millilitre sample volume per puncture is sufficient for most routine analyses, without the need for a separate device for each position.
Material for continuous use
The unit is manufactured from V4A stainless steel (1.4404, AISI 316L), which withstands the frequent mechanical stress caused by piercing and cleaning between batches without corroding. Bürkle has issued a manufacturer’s declaration for the material under Regulation (EC) No 1935/2004 for food contact, which is relevant for use in grain and feed silos. With a total length of 1.3 metres and the corresponding lever required for piercing, the stability of V4A offers a further advantage over lighter materials.
Typical applications
- Stock monitoring of cereals and animal feed for the early detection of spoilage or pest infestation
- Quality control of chemical powders and granules during ongoing storage
- Monitoring moisture distribution in silos throughout the storage period
- Release inspection prior to onward transport from the silo warehouse
- Sampling of powders and granules in the chemical industry
For deeper silos or other zones
If a penetration depth of 1,200 millimetres is insufficient for particularly large silos, or if the entire height profile is to be measured in separate layers rather than at a single target point, then the PowderProof sampling lance, horizontal, with conveying spiral is an alternative for taking samples from silos and big bags. For vertical insertion from above, we also offer the PowderProof sampling lance, vertical. If, on the other hand, only very small quantities are required from a single target point, for example from a single sack rather than an entire silo, the shorter StickProof powder sampler is the more compact alternative for sacks and cartons.
Technical details
| Material | V4A stainless steel (1.4404, AISI 316L) |
| Penetration depth | 1,200 mm |
| Overall length | 1,300 mm |
| Outer diameter | 50 mm |
| Number of collection openings | 2 |
| Total sample quantity | 100 ml |
| Start of the collection chamber | 143 mm |
| Compliance with standards | EU Regulation 1935/2004 (food contact, manufacturer’s declaration from Bürkle) |
Scope of delivery
- Silo sampler SiloPicker
Service and procurement
For businesses that take samples from both shallow and deep silos, we put together an order comprising the SiloPicker and suitable lances from the Bürkle range, for example, when several different silo sizes are in use simultaneously at a single site. If you have any questions regarding the correct penetration depth or suitability for a particular bulk material, please do not hesitate to contact us directly.