Bürkle, V4A safety container, tap, pressure relief valve, 10L, #2601-4010
€893.00
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Bürkle, V4A safety container, tap, pressure relief valve, 10L, #2601-4010"
Large containers of flammable liquids cannot be tipped completely every time only a small portion is needed. The stainless steel safety container with a tap solves this problem for 10- and 25-litre capacities: a self-closing tap dispenses the liquid in small quantities, whilst a pressure relief valve keeps the internal pressure within a safe range during storage.
Tap for dispensing measured quantities from large containers
The tap is situated on the side of the container and can be opened without having to tip or lift the whole container. It closes automatically after use. A plastic lever on the screw cap can also be used to set continuous ventilation if continuous pressure equalisation is required when pouring larger quantities.
10 and 25 litres, made from various types of stainless steel
The 10-litre container is made of 1.4571 (V4A) stainless steel with a wall thickness of 0.8 millimetres, whilst the 25-litre container is made of the slightly simpler 1.4301 (V2A) with a wall thickness of 1.2 millimetres, which is sufficient for this larger volume, designed primarily for storage and transport. The 25-litre container is also stackable, which saves space when storing several containers in the chemicals store.
For everyday use from the storage container
Whilst a safety jug or safety canister is primarily intended for transport and decanting, the safety container with a tap is usually kept in a fixed location and is tapped repeatedly from there, for example, at a workstation that regularly requires small quantities of the same solvent. The G 1 1/2-inch external thread securely holds the screw cap with tap in place.
Continuous ventilation for controlled pouring
If the plastic lever is set to continuous venting, the internal pressure is continuously equalised whilst pouring, rather than only being released when the tap is opened. This is helpful when larger quantities are being dispensed in one go and a steady flow of liquid is required. For storage purposes only, the continuous venting can be switched off again.
Choice of 10 or 25 litres
The 10-litre version is suitable for workstations with moderate consumption, where the container is still to be moved by a single person. The 25-litre version is suitable for areas with higher throughput or for a central location from which several workstations are supplied via the tap, without the container itself having to be moved frequently.
Typical applications
- Transport and storage of flammable liquids in high-quality stainless steel
- Portion-controlled dispensing from a stationary storage container at the workstation
- Centralised solvent supply to several workstations in the same area
- Space-saving storage of multiple containers in the chemicals store (25-litre version, stackable)
Technical details
| Closure type | Screw cap with tap |
| Thread | G 1 1/2 inch, external thread |
| Features | with pressure relief valve, adjustable continuous ventilation via a plastic lever |
| Seals | PTFE |
| Volume range | 10 to 25 litres |
An overview of the variants
| Item number | Capacity l | Material | Outer diameter (mm) | Height (mm) | Wall thickness (mm) | Net weight (kg) |
| 2601-4010 | 10 | V4A stainless steel (1.4571) | 260 | 330 | 0.8 | 2.48 |
| 2601-4025 | 25 | V2A stainless steel (1.4301) | 315 | 540 | 1.2 | 6.54 |
Storage of multiple containers
Anyone using both the 10-litre and 25-litre versions in the same area, for example, a smaller quantity for daily use and a larger one for stock, will benefit from the same tap mechanism on both sizes. Staff do not need to adjust to different closures, regardless of which container is currently being tapped. To maintain clarity in the chemicals store, it is advisable to clearly label the containers according to their contents, particularly when several solvents are stored in containers of the same design.
Scope of delivery
- Stainless steel safety container with tap, in the size of your choice
How to use a tap correctly
The tap opens with a brief press and closes automatically when released, so no tools are required to dispense the liquid. If the continuous venting is active, the flow of liquid remains steady even during several consecutive dispenses, rather than stalling briefly each time the tap is opened.
Service and Procurement
If the container is used more for transport than for stationary dispensing, the Safety canister with screw cap for 5 to 20 litres is often more suitable. For smaller quantities, with a precision dispenser, the Stainless steel safety jug for 1 to 5 litres is available; for a container with a tap and an additional level indicator, there is the Safety container with tap and level indicator, 10 litres. We order both sizes separately and, where necessary, also coordinate the combination of several containers for a central solvent supply.