Skip to main content Skip to search Skip to main navigation

IKA ICC basic eco 8 Immersion Circulator Package, Plastic Bath Size S, up to 100 °C, 8034900

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA ICC basic eco 8 Immersion Circulator Package, Plastic Bath Size S, up to 100 °C, 8034900"

For smaller water bath applications where neither a stainless steel bath nor a high upper temperature limit is necessary, IKA offers a compact and light variant of the ICC package family with the ICC basic eco 8 package (MPN 8034900). The ICC basic thermostat is combined here with the IB 8 eco plastic bath of size S, which is designed for pure water up to 100 °C. With a total weight of only 10.5 kilograms, the package is easy to transport and can also be set up at cramped workstations. For applications that require a higher upper temperature limit or a more robust bath material, a stainless steel bath of the pro series is optionally available within the same ICC basic series.

Heating power 2000 watts, bath temperature up to 100 °C

The thermostat delivers 2000 watts of heating power and controls the temperature via PID with a stability of ±0.02 kelvin according to DIN 12876. Since the plastic bath is designed exclusively for water and a maximum bath temperature of 100 °C, the package is especially suitable for aqueous applications. The set temperature can be set with an accuracy of ±0.1 kelvin, and the LED display shows actual and set values with a resolution of 0.1 kelvin.

Compact plastic bath size S

The IB 8 eco plastic bath has a bath opening of 188 x 105 millimetres at the bottom and a maximum of 227 x 118 millimetres at the upper bath edge, with an immersion depth of 85 to 125 millimetres. It is therefore the smallest bath in the entire ICC package series and is mainly suitable for individual, compact vessels or for workstations where only little space is available.

Pump and flow rate despite compact design

Like the larger package variants, the eco 8 package also has a pressure/suction pump with a flow rate of up to 18 litres per minute at 0 bar back pressure. This means temperature-controlled water can, if required, also be passed on from this compact bath to external consumers.

Safety according to DIN 12876

The system is classified as DIN 12876 Class III and marked FL. An adjustable safety circuit from 0 to 160 °C, visual and audible warning functions and low and high level protection ensure safe operation. The clamp mounting allows tool-free installation on the bath. The classification according to DIN 12876 applies to the thermostat itself, regardless of whether flammable media are actually used in the specific application or, as is usual with the eco bath, only water.

Interfaces and limits of the plastic bath

Even the most compact package of the ICC family has the interfaces RS 232 and USB for connection to a PC. What remains important for selection is the restriction of the IB 8 eco bath to pure water and an upper temperature limit of 100 °C, which clearly sets the package apart from the stainless steel baths of the pro series, which can be operated up to 150 °C and with other bath media. For smaller, purely water-based applications, the eco 8 is a light and affordable package in the ICC series.

Cleaning the compact plastic bath

The small IB 8 eco bath can also be maintained with mild laboratory cleaners compatible with plastics. Since no cover is included in the scope of delivery, the bath should be covered during longer idle periods to avoid evaporation and dust ingress, and a suitable cover accessory can be procured separately if required. For regular operation with water, the plastic bath remains uncomplicated in daily handling and easy to clean.

Typical applications

As a compact and light package, the ICC basic eco 8 is suitable for smaller water bath applications up to 100 °C:

  • Small-volume water baths for individual samples in routine analysis
  • Thawing and warming samples at moderate temperatures
  • Second, compact temperature control station alongside a larger main system
  • Practical courses and training with limited space per workstation

Technical details

Device typeCompact immersion circulator
Class designation according to DIN 12876III
Marking according to DIN 12876FL (classified for flammable liquids)
Heating power2,000 W
Working temperature of the circulatorRoom temp. +10 K @1,000 rpm to 150 °C
Min. operating temperature (with external cooling)-20 °C
Temperature controlPID
Working temperature sensorPT 100
Safety temperature sensorPT1000
Display working/safety temperatureLED
Temperature stability according to DIN 12876±0.02 K
Display resolution0.1 K
Setting accuracy set temperature±0.1 K
Visual/audible warning functionyes
Safety circuit, adjustable0 to 160 °C
Low/high level protectionyes
Pump typePressure/suction pump, variable pump output
Max. pump pressure (0 l flow rate)0.3 bar
Max. pump pressure suction side (0 l flow rate)0.2 bar
Max. flow rate (0 bar back pressure)18 l/min
Min. bath depth (ICC basic thermostat)150 mm
Calibration optionyes
Device mountingClamp
Permissible duty cycle100 %
Dimensions of thermostat (W x H x D)145 x 340 x 200 mm
Total dimensions of package (W x H x D)320 x 335 x 349 mm
Bath opening (bottom)188 x 105 mm
Max. bath opening (upper bath edge)227 x 118 mm
Immersion depth (package)85 to 125 mm
Max. temperature in bath100 °C (plastic bath, eco series, water only)
Bath materialPlastic
Weight of total package10.5 kg
Permissible ambient temperature5 to 40 °C
Permissible relative humiditymax. 80 %
IP rating according to DIN EN 60529IP 21
InterfacesRS 232 and USB
Power supply230 V, 50/60 Hz

Scope of delivery

  • 1 x IKA ICC basic compact immersion circulator
  • 1 x IB 8 eco plastic bath, size S
  • 1 x BS.ICC bath bridge

Cover, pump connection set and cooling coil are not included in this package variant and must be procured separately if required.

Warranty

Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Individual requirements & procurement service

For additional accessories for the ICC basic eco 8 or for switching to a larger package, we are happy to advise you via our procurement service. Further information and contact options can be found at our procurement service.

Certification marks: NRTL (TÜV SÜD, USA/Canada)