IKA dispersing tool S 50 N - G 45 G - ST, sawtooth design, 0008039500
€2,718.00
% Manufacturer's RRP: €3,624.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA dispersing tool S 50 N - G 45 G - ST, sawtooth design, 0008039500"
The IKA S 50 N - G 45 G - ST dispersing tool is a dispersing tool for the comminution, homogenisation and suspension of demanding sample media on a laboratory and pilot-plant scale. This rotor-stator system is designed for use with the IKA dispersing drives of the ULTRA-TURRAX T 50 series. In complex processes within the pharmaceutical processing industry, food analysis, biotechnology or pulp research, the aim is to disrupt tough, fibrous or elastic sample structures in order to produce homogeneous suspensions for subsequent analytical steps.
Fluid-mechanical comminution via sawtooth geometry
The process-engineering heart of the tool is the generator in a special ST (Saw Tooth) design. The distinctive geometry of the saw teeth on the rotor and stator generates high mechanical impact, cutting and shear forces in the transient shear gap. These mechanical kinetics are designed to cut and disintegrate fibrous matrices (such as tissue structures, plant parts, tobacco, paper and wood pulps, as well as tough plastics or viscous emulsions). According to the manufacturer, the flow-optimised tooth arrangement is designed to reduce the wrapping of fibres around the shaft.
Materials and sterilisability
The dispersing tool is designed for chemical resistance. The parts in contact with the medium are made of stainless steel grade 1.4404 (AISI 316L) and PTFE. The shaft runs in a PTFE bearing system. According to IKA, this combination of materials is resistant to acids, alkalis and organic solvents. To reduce the risk of cross-contamination in multi-user operation, the tool can be sterilised in an autoclave or cleaned with standard disinfectants.
Process reliability and convenient system integration
The tool is designed for speeds of up to 10,000 revolutions per minute. The dispersing shaft can be secured quickly and without tools in the T 50 digital drive via the standardised connection. Thanks to the immersion depth of up to 250 mm and the fluid-mechanical geometry, the tool is designed for a wide working volume ranging from 0.5 to 20 litres (based on water). This offers laboratory managers and industrial users maximum flexibility when scaling up processes from research to pilot plant scale.
Technical details
Metrology & dispersion specifications
- Tool type: Rotor-stator dispersing tool
- Model designation: S 50 N - G 45 G - ST
- Operating range (volume range for H₂O): 0.5 to 20 litres
- Generator design: G (Coarse) with ST geometry (sawtooth)
- Maximum speed range: 10,000 rpm
- Maximum peripheral speed: approx. 18.8 m/s
Design, materials & geometry
- Materials in contact with the medium: Stainless steel 1.4404 (AISI 316L), PTFE
- Stator diameter: 45 mm
- Rotor diameter: 36 mm
- Shear gap (distance): approx. 0.5 mm
- Minimum immersion depth: 70 mm
- Max. immersion depth: 250 mm
- Shaft diameter: 30 mm
- Overall length: 290 mm
Operating conditions & cleaning
- Solvent resistance: Yes
- Cleaning: Autoclavable (up to 121 °C) and hot-air sterilisable (up to 180 °C)
- Bearing type: PTFE plain bearing (shaft-guided, low-maintenance)
Scope of delivery
- 1 x IKA S 50 N - G 45 G - ST dispersing tool
- 1 x Operating instructions
Note: The required dispersing drive (e.g. IKA ULTRA-TURRAX T 50 digital), stand fixtures, boss heads and sample vessels are not included in the standard scope of delivery and must be configured separately.
Individual requirements & accessories
To get the most out of the IKA S 50 N - G 45 G - ST tool, we recommend using it with the original ULTRA-TURRAX T 50 digital dispersing drive. For a safe and vibration-free setup at your laboratory workstation, our range includes suitable telescopic stands (R 2722 or R 2723), robust boss heads (R 271) and practical vessel holders (RH 5). Should you wish to process samples requiring finer final homogenisation, we can also source alternative IKA generator heads with medium (M) or fine (F) toothing on request. We can source original PTFE replacement bearings for the regular replacement of wear parts on request. Please use our technical procurement service to put together your complete homogenisation system.