IKA ICC basic eco 18 Immersion Circulator Package, Plastic Bath Size L, up to 100 °C, 8035000
€1,671.75
% Manufacturer's RRP: €2,229.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA ICC basic eco 18 Immersion Circulator Package, Plastic Bath Size L, up to 100 °C, 8035000"
Not every temperature control task in the laboratory needs a stainless steel bath up to 150 °C, and for many water bath applications a lighter and more affordable solution is sufficient. The IKA ICC basic eco 18 package (MPN 8035000) combines the ICC basic thermostat with a large-volume plastic bath of size L, which is designed exclusively for operation with water up to 100 °C. With a bath opening of 245 x 305 millimetres, the eco bath offers ample space for larger vessels, at a total weight of only 11.93 kilograms for the complete package.
2000 watts heating power, limited to pure water
The thermostat delivers the same 2000 watts of heating power as in the stainless steel bath packages of the pro series, but the plastic bath itself is expressly limited to pure water and a maximum temperature of 100 °C. The PID control holds the temperature with a stability of ±0.02 kelvin according to DIN 12876, and the set temperature can be set with an accuracy of ±0.1 kelvin and read off the LED display with 0.1 kelvin resolution.
Plastic bath size L as a light alternative
The IB 18 eco plastic bath has a bath opening of 245 x 305 millimetres at the bottom and a maximum of 286 x 325 millimetres at the upper bath edge, with an immersion depth of 85 to 125 millimetres. Compared with the stainless steel baths of the pro series, the plastic bath is noticeably lighter, which makes transport and installation easier, but with the clear restriction to water as the bath medium and an upper temperature limit of 100 °C.
Pump for external circuit operation
The eco package also has the full pressure/suction pump function of the ICC basic thermostat with a flow rate of up to 18 litres per minute at 0 bar back pressure. This means temperature-controlled water can also be passed on with this package to external consumers such as water baths, cold traps or jacketed vessels, provided the upper temperature limit of 100 °C is sufficient for the respective application.
Safety according to DIN 12876
The system is classified as DIN 12876 Class III and marked FL for use with flammable liquids, even though the eco version is in practice intended mainly for aqueous media because of the temperature limit. An adjustable safety circuit from 0 to 160 °C, visual and audible warning functions and low and high level protection provide additional protection during operation. The clamp mounting allows tool-free installation on the bath.
Interfaces and material resistance of the plastic bath
As with the stainless steel bath packages, the interfaces RS 232 and USB are available for PC connection, via which temperature curves can be logged. The restriction of the plastic bath to pure water up to 100 °C suits purely aqueous applications: for these, the eco bath offers a lighter and more cost-effective alternative to the stainless steel bath, without compromises in heating power, control accuracy or pump function. If you regularly also need other bath media or higher temperatures, you should choose a stainless steel bath of the pro series.
Cleaning the plastic bath
The IB 18 eco plastic bath can be cleaned with mild laboratory cleaners suitable for plastic, but should not come into contact with strongly solvent-containing or strongly alkaline cleaning agents, as is generally the case for plastics. Since the bath is supplied without an additional cover, covering it with a separate accessory is recommended during longer periods of non-use to reduce evaporation and contamination by dust. For daily operation with water as the bath medium, the plastic bath is otherwise uncomplicated to handle.
Typical applications
As a large-volume water bath package, the ICC basic eco 18 is suitable for applications where 100 °C is sufficient as the upper temperature limit:
- Water baths for enzyme reactions, incubation and other temperature-dependent biological processes
- Thawing and warming processes for samples in routine analysis
- Calibration baths for thermometers in the temperature range up to 100 °C
- Practical courses and training where an economical, large-volume water bath is needed
- External temperature control of vessels via the pump connection at moderate temperatures
Technical details
| Device type | Compact immersion circulator |
|---|---|
| Class designation according to DIN 12876 | III |
| Marking according to DIN 12876 | FL (classified for flammable liquids) |
| Heating power | 2,000 W |
| Working temperature of the circulator (bath up to 100 °C) | Room temp. +10 K @1,000 rpm to 150 °C |
| Min. operating temperature (with external cooling) | -20 °C |
| Temperature control | PID |
| Working temperature sensor | PT 100 |
| Safety temperature sensor | PT1000 |
| Display working/safety temperature | LED |
| Temperature stability according to DIN 12876 | ±0.02 K |
| Display resolution | 0.1 K |
| Setting accuracy set temperature | ±0.1 K |
| Visual/audible warning function | yes |
| Safety circuit, adjustable | 0 to 160 °C |
| Low/high level protection | yes |
| Pump type | Pressure/suction pump, variable pump output |
| Max. pump pressure (0 l flow rate) | 0.3 bar |
| Max. pump pressure suction side (0 l flow rate) | 0.2 bar |
| Max. flow rate (0 bar back pressure) | 18 l/min |
| Min. bath depth | 150 mm |
| Calibration option | yes |
| Device mounting | Clamp |
| Permissible duty cycle | 100 % |
| Dimensions of thermostat (W x H x D) | 145 x 340 x 200 mm |
| Total dimensions of package (W x H x D) | 338 x 584 x 349 mm |
| Bath opening (bottom) | 245 x 305 mm |
| Max. bath opening (upper bath edge) | 286 x 325 mm |
| Immersion depth | 85 to 125 mm |
| Max. temperature in bath | 100 °C (plastic bath, eco series, water only) |
| Bath material | Plastic |
| Weight of total package | 11.93 kg |
| Permissible ambient temperature | 5 to 40 °C |
| Permissible relative humidity | max. 80 % |
| IP rating according to DIN EN 60529 | IP 21 |
| Interfaces | RS 232 and USB |
| Power supply | 230 V, 50/60 Hz |
Scope of delivery
- 1 x IKA ICC basic compact immersion circulator
- 1 x IB 18 eco plastic bath, size L
- 1 x BL.ICC bath bridge
Cover, pump connection set and cooling coil are not included in this package variant and must be procured separately if required.
Warranty
Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Individual requirements & procurement service
If additional accessories such as a cover or a pump connection set are needed for the ICC basic eco 18, or if you want to switch to a stainless steel bath of the pro series for higher temperatures, we are happy to support you via our procurement service. Further information and contact options can be found at our procurement service.
| Certification marks: | NRTL (TÜV SÜD, USA/Canada) |
|---|