IKA ICC basic pro 12 c Immersion Circulator Package, Stainless Steel Bath Size M, up to 150 °C, 10000416
€2,152.50
% Manufacturer's RRP: €2,870.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA ICC basic pro 12 c Immersion Circulator Package, Stainless Steel Bath Size M, up to 150 °C, 10000416"
Not every laboratory needs the largest bath available, and a medium format is often the better compromise between footprint and bath volume. The IKA ICC basic pro 12 c package (MPN 10000416) combines the proven ICC basic thermostat with a size M stainless steel bath and also supplies bath bridge, cover, pump connection set and cooling coil. With 2000 watts of heating power and a working temperature range from room temperature to 150 °C, the system covers most temperature control tasks that arise in the routine laboratory with an external bath circuit.
Heating power and control accuracy in detail
The 2000 watts of heating power warm the bath quickly to the set temperature, and the PID control then holds the temperature with a stability of ±0.02 kelvin according to DIN 12876. The current temperature can be read off the LED display with a resolution of 0.1 kelvin, and the set temperature itself can be set with an accuracy of ±0.1 kelvin. A PT 100 sensor measures the working temperature in the bath, and an independent PT1000 sensor handles safety monitoring.
Stainless steel bath size M as a balanced format
The IB 12 pro stainless steel bath offers a bath opening of 255 x 127 millimetres at the bottom and a maximum of 292 x 147 millimetres at the upper bath edge, with an immersion depth of 85 to 125 millimetres. Compared with the L bath it takes up significantly less space, but remains large enough for several vessels or a permanently connected external consumer. Like all baths of the pro series, it is made of stainless steel and designed for temperatures up to 150 °C.
Pump, cooling coil and cover for circuit operation
The integrated pressure/suction pump delivers up to 18 litres per minute at 0 bar back pressure and can be connected to external consumers via the supplied pump connection set PCS.ICC. The cooling coil CC2 allows external cooling of the bath if required, so that temperatures below room temperature down to minus 20 °C can also be reached. The enclosed cover CM.ICC reduces evaporation of the bath medium and at the same time protects against splashes and foreign bodies.
Safety equipment according to DIN 12876
Classified according to DIN 12876 Class III with marking FL, the system is classified for use with flammable liquids. An adjustable safety circuit from 0 to 160 °C, a visual and audible warning function and low and high level protection ensure safe operation. The thermostat is attached to the bath by a clamp and can therefore be mounted and removed again tool-free, for example for maintenance or cleaning.
Interfaces and continuous operation
The interfaces RS 232 and USB are available for connection to a PC, via which temperature curves can be logged or several devices monitored together. The permissible duty cycle of 100 % makes the ICC basic pro 12 c suitable for continuous operation, for example when a test series is to run for several days at constant temperature. A calibration option additionally allows the temperature display to be compared against a reference thermometer, which supports verifiable measured values, particularly in quality assurance.
Cleaning and care of the stainless steel bath
Like all baths of the pro series, the IB 12 pro is made of stainless steel and can be maintained with common laboratory cleaners without reacting sensitively to mechanical stress. The supplied cover CM.ICC additionally protects the bath from dust and contamination when it is temporarily not in use, and at the same time reduces evaporation during operation. Since the thermostat can be removed tool-free via the clamp, the bath itself also remains easily accessible at any time for thorough cleaning.
Typical applications
The medium-sized stainless steel bath makes the ICC basic pro 12 c a flexible solution for different temperature control tasks:
- External temperature control of jacketed vessels, viscometers or refractometers
- Calibration baths for thermometers and other temperature measuring devices in quality assurance
- Routine temperature control of samples in research and development
- Laboratory workstations with limited space where an L bath would be too large
- Teaching and training laboratories that need a fully equipped system without additional procurement
Technical details
| Device type | Compact immersion circulator |
|---|---|
| Class designation according to DIN 12876 | III |
| Marking according to DIN 12876 | FL (classified for flammable liquids) |
| Heating power | 2,000 W |
| Working temperature | Room temp. +10 K @1,000 rpm to 150 °C |
| Min. operating temperature (with external cooling) | -20 °C |
| Temperature control | PID |
| Working temperature sensor | PT 100 |
| Safety temperature sensor | PT1000 |
| Display working/safety temperature | LED |
| Temperature stability according to DIN 12876 | ±0.02 K |
| Display resolution | 0.1 K |
| Setting accuracy set temperature | ±0.1 K |
| Visual/audible warning function | yes |
| Safety circuit, adjustable | 0 to 160 °C |
| Low/high level protection | yes |
| Pump type | Pressure/suction pump, variable pump output |
| Max. pump pressure (0 l flow rate) | 0.3 bar |
| Max. pump pressure suction side (0 l flow rate) | 0.2 bar |
| Max. flow rate (0 bar back pressure) | 18 l/min |
| Min. bath depth | 150 mm |
| Calibration option | yes |
| Device mounting | Clamp |
| Permissible duty cycle | 100 % |
| Dimensions of thermostat (W x H x D) | 145 x 340 x 200 mm |
| Total dimensions of package (W x H x D) | 354 x 461 x 388 mm |
| Bath opening (bottom) | 255 x 127 mm |
| Max. bath opening (upper bath edge) | 292 x 147 mm |
| Immersion depth | 85 to 125 mm |
| Max. temperature in bath | 150 °C (stainless steel bath, pro series) |
| Bath material | Stainless steel |
| Weight of total package | 16.36 kg |
| Permissible ambient temperature | 5 to 40 °C |
| Permissible relative humidity | max. 80 % |
| Degree of protection according to DIN EN 60529 | IP 21 |
| Interfaces | RS 232 and USB |
| Power supply | 230 V, 50/60 Hz |
Scope of delivery
- 1 x IKA ICC basic compact immersion circulator
- 1 x IB 12 pro stainless steel bath, size M
- 1 x BL.ICC bath bridge
- 1 x CM.ICC cover
- 1 x PCS.ICC pump connection set
- 1 x CC2 cooling coil
Warranty
Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Individual requirements & procurement service
If the M bath of the ICC basic pro 12 c no longer meets growing requirements, we support you via our procurement service when switching to a larger format or with additional accessories such as connecting hoses and replacement sensors. Further information and contact options can be found at our procurement service.
| Certification marks: | NRTL (TÜV SÜD, USA/Canada) |
|---|