IKA ROTATEMP lo-vi Package, Viscometer Set including Heating System (300 °C), Low-viscosity, 0010014004
€5,101.60
% Manufacturer's RRP: €7,288.00 30% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA ROTATEMP lo-vi Package, Viscometer Set including Heating System (300 °C), Low-viscosity, 0010014004"
Not every temperature-dependent sample is as tough as bitumen. When heated, waxes, hot-melt adhesives or confectionery mixtures often become thin and fluid before transitioning to a medium viscosity range, and it is precisely this lower range for which the ROTATEMP lo-vi Package is designed. It combines the ROTAVISC drive in the lo-vi range with the IKA ROTATEMP high-temperature system, which heats samples to up to 300 °C in around 16 minutes. The drive, stand, heating system and spindle set are coordinated as a complete package and ready for use.
Spindle set and measuring spring for the lo-vi range
For lower viscosities, a more sensitive measuring spring is fitted than in the me-vi models; the spring torque is just 0.0673 mNm. Together with the SP set-1 spindle set, the instrument covers a range up to 6,000,000 mPas, with an accuracy of 1 % of the measuring range and a repeatability of 0.2 %. This means that even thinner melts remain within the measurement range, whereas with the me-vi instruments they would already be outside the resolution at the lower end.
ROTATEMP high-temperature system
The heating system is mounted directly on the boom, eliminating the need for a separate external water bath. The sample is brought to the target temperature in approximately 16 minutes using magnetic stirrer technology; according to the manufacturer, this is achieved without overheating it. According to the data sheet, the sample’s working temperature ranges from -100 to 300 °C; of particular practical relevance for this package is the heated upper range up to 300 °C, combined with the drive’s low-viscosity measurement range.
Operation and connectivity
The TFT display allows the speed (0.01 to 200 rpm), timer (0.017 to 6,000 min) and measured values to be set and read directly; a ramp function automates recurring test sequences, and the graph function displays the viscosity curve throughout the heating phase. RS 232 and USB-B connect the device to the labworldsoft laboratory software for control, automation and documentation of the measurement series. An external PT-100 temperature sensor with a resolution of 0.1 K supplements the internal measurement.
Operating conditions and compact design
The drive, stand and heating system form a ready-to-connect complete system with a space-saving design; there is no need for a separate setup comprising a bath, pump and tubing. The stand’s telescopic stroke is 200 mm with a permissible dynamic load of 5 kg; the base vessel holds 600 ml of sample. The unit is designed for operation at an ambient temperature of 5 to 40 °C and a maximum relative humidity of 80 %; the motor delivers 4.8 W at the output, rotates clockwise as standard and is protected against overload.
Typical applications
The lo-vi range is suitable wherever samples become flowable when heated but do not reach the extreme viscosity of bitumen or similar materials.
- Waxes, hot-melt adhesives and polymers in the low-viscosity range
- Confectionery mixtures and other food melts at a defined temperature
- Comparative measurement series at different target temperatures up to 300 °C
- Samples that would be too thin for the me-vi measurement range
- Quality control with documented, reproducible heating profiles
- Automated measurement series via labworldsoft and RS 232 or USB-B
Technical details
| Viscosity measurement range | up to 6,000,000 mPas |
|---|---|
| Accuracy (FSR) | 1 % |
| Repeatability (FSR) | 0.2 % |
| Spring torque | 0.0673 mNm |
| Measuring spindles | SP set-1 |
| Speed range | 0.01 to 200 rpm |
| Time setting range | 0.017 to 6,000 min |
| Working temperature | -100 to 300 °C |
| Stand | ROTASTAND |
| Stroke of telescopic stand / max. stroke | 200 mm / 61 mm |
| Dynamic load | 5 kg |
| Base vessel volume | 600 ml |
| Interfaces | RS 232, USB-B |
| Dimensions (W x H x D) | 351 x 629 x 372 mm |
| Weight | 7.1 kg |
| Connected load | 100 to 240 V, 50/60 Hz, 24 W (standby 1.6 W), 24 V DC, 1,000 mA |
| Degree of protection | IP 40 (DIN EN 60529) |
Scope of delivery
The drive, stand, heating system and spindle set are supplied as a pre-assembled set; each component can be reordered individually using its own identification number if required, for example for a second temperature sensor.
- 1 x ROTAVISC lo-vi control S000
- 1 x ROTASTAND (ID no. 0020116428)
- 1 x ROTATEMP high-temperature system (ID no. 0020113825)
- 1 x SP set-1, spindle set (ID no. 0025000319)
- 1 x PT 100.8 temperature sensor (ID no. 0025000413)
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Warranty and procurement service
IKA manufacturer’s warranty: 2 years; extended to 10 years upon registration at ika.com/register within 90 days of purchase. For regularly processed, higher-viscosity samples within the same temperature range, the ROTATEMP me-vi Package is available with a wider measurement range up to 40,000,000 mPas. For SBS ball bearings with high sample throughput, the ROTATEMP SBS me-vi Package is a robust alternative in the higher range. Those who require cooling as well as heating, for example for samples between -25 and 125 °C, are better served by the CBC ROTAVISC lo-vi Package, where a recirculating bath thermostat takes over temperature control instead of the cantilever heating system. We can advise on selecting the appropriate system and the correct measurement range, and can source further accessories, such as replacement spindles, via our procurement service.