IKA ROTAVISC SBS hi-vi II HELI Complete, 800 to 320,000,000 mPas, ball bearings, electric stand, 0010013672
€3,318.00
% Manufacturer's RRP: €4,740.00 30% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA ROTAVISC SBS hi-vi II HELI Complete, 800 to 320,000,000 mPas, ball bearings, electric stand, 0010013672"
At the upper end of the viscosity spectrum, for viscous pastes, putties or spreadable compounds just below their yield point, a rotational viscometer requires a stronger measuring spring and a bearing assembly capable of withstanding the correspondingly high forces. The ROTAVISC SBS hi-vi II HELI Complete covers, at 800 to 320,000,000 mPas, the highest measurement range in the ROTAVISC-SBS-HELI series, and comes as a complete package featuring SBS ball bearings and a motorised HELISTAND stand.
The highest measurement range in the series
The hi-vi II range features the most powerful measuring spring in the ROTAVISC SBS family; the spring torque is 5.7496 mNm, more than four times that of the me-vi version. In combination with the SP set-2 spindle set, the instrument covers the range from 800 to 320,000,000 mPas with an accuracy of 1 % of the measuring range and a repeatability of 0.2 %, the same values as for the other ROTAVISC-SBS models in the series.
SBS ball bearing design to resist wear
With highly viscous samples, significantly higher forces act on the bearings than with low-viscosity media; the SBS version (Steel Ball Bearing, Suspended) withstands this better than the jewel bearings used in standard instruments. This proves particularly beneficial where there are frequent changes between samples of varying viscosity or where the instrument is in use for several shifts in a row. The drive and display control are identical to those of the other ROTAVISC-SBS instruments in the range; the only difference lies in the measuring spring and spindle assembly.
HELISTAND stand, display and interfaces
The motorised HELISTAND stand moves the viscometer and rotating body slowly and smoothly through the sample; the telescopic stroke is 142 mm, the maximum stroke at the boom is 61 mm, and the permissible dynamic load is 3.2 kg. The TFT display allows the rotational speed (0.01 to 200 rpm), timer (0.017 to 6,000 min) and measured values to be set and read directly; a ramp function automates recurring test sequences. The PT 100 accommodates an external temperature sensor, whilst RS-232 and Micro-USB transmit the measurement data to a PC or laboratory software.
Calibration and environmental conditions
The unit can be calibrated at the test station and is protected against overload; the motor delivers 4.8 W at the output and rotates clockwise as standard. It is designed for operation at an ambient temperature of 5 to 40 °C and a maximum relative humidity of 80 %; the base vessel holds 600 ml of sample, whilst the stand rod has a diameter of 16 mm with a 12 mm plug-in coupling.
Typical applications
The hi-vi-II range is intended for samples that would already be too viscous for the hi-vi-I range, such as highly viscous substances just below their yield point. Thanks to the SBS ball bearing system, switching between spindles and test series remains reproducible.
- Testing of extremely high-viscosity samples beyond the hi-vi-I measurement range
- Quality control with high sample throughput and frequent spindle changes
- Measurements with a rotating body via the motorised HELISTAND stand
- Switching between workstations
- Documented measurement series via RS 232 or USB interface
- Measurement series with external temperature monitoring via the PT-100 connection
Technical details
| Viscosity measurement range | 800 – 320,000,000 mPas |
|---|---|
| Accuracy (FSR) | 1 % |
| Repeatability (FSR) | 0.2 % |
| Spring torque | 5.7496 mNm |
| Speed range | 0.01 – 200 rpm |
| Speed setting accuracy | ±0.01 rpm |
| Time setting range | 0.017 – 6,000 min |
| Base vessel volume | 600 ml |
| Operating temperature (sample) | -100 to 300 °C |
| Stand | HELISTAND, motorised |
| Stroke of telescopic stand / max. stroke | 142 mm / 61 mm |
| Dynamic load | 3.2 kg |
| Interfaces | RS-232, Micro-USB |
| Dimensions (W x H x D) | 351 x 629 x 372 mm |
| Weight | 7.1 kg |
| Connected load | 100–240 V, 50/60 Hz, 24 W (standby 0.06 W), 24 V DC, 1,000 mA |
| Degree of protection | IP 40 (DIN EN 60529) |
Scope of delivery
The drive, stand and spindle set are designed to work together and are supplied as a complete, pre-assembled package. Each component can be reordered individually using its own identification number if required, for example if a second spindle set or a replacement temperature sensor is needed.
- 1 x ROTAVISC SBS hi-vi II control
- 1 x HELISTAND, motorised stand (Ident No. 0020116429)
- 1 x T-SP-SET (Ident No. 0025007765)
- 1 x SP set-2, spindle set (Ident No. 0025000329)
- 1 x PT 100.8 temperature sensor (Ident No. 0025000413)
- 1 x protective bracket
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Warranty and procurement service
IKA manufacturer’s warranty: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase. The ROTAVISC SBS hi-vi I HELI Complete is available for the medium viscosity range (200 to 80,000,000 mPas), whilst the ROTAVISC SBS me-vi HELI Complete is available for the medium-viscosity range (100 to 40,000,000 mPas), each featuring the same SBS ball bearing system and the same HELISTAND stand. Those who do not require motorised movement will find the ROTAVISC SBS hi-vi II Complete, which offers the same bearing system and the same measurement range on a fixed ROTASTAND. We can advise on selecting the appropriate measurement range and, via our procurement service, can supply further accessories such as spindles, calibration oil or spare parts for the stand.