Skip to main content Skip to search Skip to main navigation

IKA S 25 EC - T - C - 25 F Dispersing Tool, Ø 25 mm, with Temperature Sensor, 0025007199

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 25 EC - T - C - 25 F Dispersing Tool, Ø 25 mm, with Temperature Sensor, 0025007199"

The S 25 EC - T - C - 25 F (0025007199) measures the temperature within the batch itself: the tool contains a sensor for 0 to 125 °C. It has a 25 mm stator and an 18 mm rotor, processes volumes from 0.01 to 2 l and follows the ‘easy-clean’ principle. IKA specifies the T 25 easy clean control as the drive unit.

Sensor and operating hours

Temperature is measured during operation via the integrated sensor. The tool also records operating hours. When maintenance is due, a message appears on the drive’s display. The tool’s maximum operating temperature is 120 °C.

easy clean

After turning and lowering the clamp, the shaft and rotor fall out. The shaft tube can then be rinsed from the inside. The shaft runs in a ceramic plain bearing; the parts in contact with the product are made of AISI 316L and ceramic.

Geometry and fineness

The gap between the rotor and stator is 0.5 mm. A speed of 25,000 rpm is permitted, with a circumferential speed of up to 23.6 m/s at the rotor. The immersion depth is 45 to 150 mm, and the installation length is 191 mm. The final fineness is 5 to 25 µm for suspensions and 1 to 5 µm for emulsions. The tool weighs 0.634 kg and is suitable for solvents and abrasive substances. The pH range is from 2 to 13; sterilisation may be carried out using any method except hot air.

Without a sensor or with a different rotor

Without a temperature sensor, the same geometry is available as the S 25 EC - C - 25 F with an operating temperature of up to 180 °C. The S 25 EC - T - C - 25 G operates with a sensor, but features a 17 mm rotor and a circumferential speed of 22.2 m/s.

Typical applications

  • Dispersing in the cosmetics sector
  • Batches from 0.01 to 2 l with temperature measurement
  • Emulsions with final particle sizes of 1 to 5 µm
  • Working with solvents
  • Sample series with maintenance reminders based on operating hours

Technical details

Working range (H2O)0.01 to 2 l
Recommended working range100 to 2,000 ml
Stator diameter25 mm
Rotor diameter18 mm
Stator/rotor gap width0.5 mm
Max. permissible speed25,000 rpm
Maximum circumferential speed23.6 m/s
Immersion depth45 to 150 mm
Installation length191 mm
BearingCeramic plain bearings
Materials in contact with the productAISI 316L, ceramic
pH range2 to 13
Suitable for solventsYes
Suitable for abrasive substancesYes
Temperature measurement range0 to 125 °C
Max. operating temperature120 °C
Sterilisabilityall methods except hot air
Operating hours detectionYes, maintenance reminder on the drive display
Final fineness of suspensions5 to 25 µm
Final fineness of emulsions1 to 5 µm
Weight0.634 kg

Scope of delivery

  • 1 x IKA S 25 EC - T - C - 25 F dispersing tool (single tool)
  • The T 25 easy clean control drive is not included in the scope of delivery.

Individual requirements and procurement service

We can supply the T 25 easy clean control drive and other tools on request. The procurement service can assist with selection.

Skip product gallery

Matching accessories

Discount In stock
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
Manufacturer number: 0025007380
Sale price: €82.50
RRP €110.00 25% below manufacturer's RRP