IKA S 25 KD - LR - 25 G dispersing tool (for laboratory reactors), 0025007321
€1,824.00
% Manufacturer's RRP: €2,432.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 KD - LR - 25 G dispersing tool (for laboratory reactors), 0025007321"
The IKA S 25 KD - LR - 25 G is a specialised dispersing tool designed primarily for use in IKA laboratory reactors (LR series). The distinctive feature of this tool lies in its geometric design: it has an extended shaft (267 mm installation length), which allows for deeper immersion into reactor vessels. This allows homogenisation even at low liquid levels or with small sample volumes, without the reactor needing to be filled to the brim.
KD design for vacuum and cleaning
The abbreviation ‘KD’ stands for a special sealing and bearing design that allows operation under vacuum down to 100 mbar. This makes the tool suitable for processes where air ingress must be avoided or which take place under reduced pressure (e.g. degassing during dispersion). At the same time, the tool in KD design can be disassembled for cleaning: the rotor can be removed, which facilitates cleaning and sterilisation (wet chemical or autoclave).
Materials
All parts in contact with the product are made of stainless steel (AISI 316L), PTFE and FFKM. According to IKA, this combination offers high chemical resistance (pH 2 to 13) and solvent compatibility.
Technical details
- Processing volume (H₂O): 0.05 to 2.0 l
- Stator diameter: 25 mm
- Rotor diameter: 17 mm
- Gap width: 0.5 mm
- Installation length: 267 mm
- Immersion depth: 40 to 220 mm
- Weight: 0.351 kg
- Final fineness (suspensions): 15 to 50 µm
- Final fineness (emulsions): 1 to 10 µm
- Max. operating temperature: 150 °C
- Vacuum resistance: up to 100 mbar
- Materials (in contact with the product): AISI 316L, PTFE, FFKM
- Max. peripheral speed: 22.2 m/s
- Compatibility: T 25 digital, T 25 easy clean (digital/control)
Scope of delivery
- 1 x IKA S 25 KD - LR - 25 G dispersing tool (single tool)
- The drive is not included in the scope of delivery.
Individual requirements & procurement service
Do you require the even finer ‘F’ version for emulsions, or the shorter standard version without the ‘LR’ extension? We can source IKA dispersing accessories on request and help with the selection.