Skip to main content Skip to search Skip to main navigation

Memmert UF30 universal oven, 32 l, +20 to +300 °C, SingleDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert UF30 universal oven, 32 l, +20 to +300 °C, SingleDISPLAY"

With an internal capacity of 32 litres, the Memmert UF30 universal oven is the smallest model in the UF series and has compact external dimensions of 585 x 704 x 434 mm. Featuring forced air circulation and a temperature range of +20 to +300 °C, it is suitable for drying and heating processes involving individual samples or small batches where floor space is limited but the temperature inside the chamber must still be evenly distributed.

Design and air circulation

An electronically controlled, low-noise air turbine circulates the air within the chamber; its speed can be adjusted in 10 % increments. Preheated fresh air is introduced via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve can also be controlled electronically. The low-maintenance interior is reinforced with deep-drawn ribbing and features a protected, integrated 4-sided all-round heating system; the housing has a fully galvanised sheet steel rear panel.

Control via the ControlCOCKPIT

The UF30 is controlled via a ControlCOCKPIT featuring a high-resolution TFT colour graphic display and a DIN Class A Pt100 sensor in a 4-wire configuration. The setting accuracy is 0.1 °C up to a setpoint temperature of 99.9 °C and 0.5 °C from 100 °C onwards. The SetpointWAIT function only starts the process time once the setpoint temperature has actually been reached; a digital countdown timer covers target times ranging from 1 minute to 99 days. Three freely selectable temperature values can be calibrated, whilst a self-diagnostic system assists with troubleshooting. The programme sequence is saved in the event of a power failure, and the data logger can be read out and managed via the Ethernet interface.

Safety according to DIN 12880

A mechanical temperature limiter, protection class 1 according to DIN 12880, switches off the heating when the temperature rises to approximately 20 °C above the maximum cabinet temperature. The door is fully insulated and fitted with a two-point locking mechanism as a compression door lock. The permissible ambient temperature is +5 °C to +40 °C with a maximum relative humidity of 80 % (non-condensing), and the cabinet may be installed at altitudes of up to 2,000 m above sea level. The cabinet must only be transported in an upright position.

Selection guide for the correct size

The scope of delivery includes a stainless steel grid shelf and up to three possible shelves; the UF30 is designed for small to medium sample quantities; a total load of up to 60 kg and 20 kg per shelf are permitted. Those who regularly wish to dry or temper multiple batches simultaneously will find greater internal volume in the UF55 (53 l) or the UF75 (74 l), as shown in the size table below.

Typical applications

With an internal volume of 32 litres, the UF30 is suitable for drying, heating, tempering, ageing, baking, testing and curing in research, science, industry and quality assurance.

  • Drying small sample batches in laboratory settings
  • Tempering and curing of individual material samples
  • Preparing and baking small components in quality assurance
  • Ageing and testing small samples in research and quality assurance

Technical details

Setting temperature range+20 to +300 °C
Working temperature rangeat least 10 °C above room temperature up to +300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor1x Pt100, DIN Class A, 4-wire measurement
Internal volume32 l
Internal dimensions (W x H x D)400 x 320 x 250 mm (depth minus 39 mm for the fan)
External dimensions of housing (W x H x D)585 x 704 x 434 mm
Net weightapprox. 45 kg
Connection 230 V50/60 Hz, approx. 1,600 W
Connection 115 V50/60 Hz, approx. 1,600 W
Shelves max.3
Shelves included in scope of delivery1
Max. load on unit60 kg
Max. load per shelf20 kg
Interiordeep-drawn ribbed, 4-sided all-round heating
ControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphic display
Permissible ambient temperature+5 °C to +40 °C
Permissible relative humiditymax. 80 % rel., non-condensing
Maximum installation altitude2,000 m
MarkingsCE, VDE GS, UL, EAC

Other sizes in the series

The UF series with SingleDISPLAY ranges from 32 to 1,060 litres internal volume, sorted by internal volume:

ModelInternal volumeSet temperatureDisplay
UF30 (this page)32 l+20 to +300 °CSingleDISPLAY
UF5553 l+20 to +300 °CSingleDISPLAY
UF7574 l+20 to +300 °CSingleDISPLAY
UF110108 l+20 to +300 °CSingleDISPLAY
UF160161 l+20 to +300 °CSingleDISPLAY
UF260256 l+20 to +300 °CSingleDISPLAY
UF450449 l+20 to +300 °CSingleDISPLAY
UF750749 l+20 to +300 °CSingleDISPLAY
UF10601,060 l+20 to +300 °CSingleDISPLAY

This model is also available with two temperature sensors and two control displays for redundant monitoring in the UF-plus series: UF30plus.

Scope of delivery

  • 1x Memmert UF30 universal oven
  • Factory calibration certificate (calibrated at +160 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • 1x stainless steel grid shelf, electropolished

Regulatory information

This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29728) or without air slots (B29729). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

For the UF30, the following items, amongst others, can be ordered ex-works: a full-view glass door, interior lighting and a socket, as well as a gas-tight version. Accessories available include additional shelves and perforated panels, drip trays, a wall bracket, a USB-to-Ethernet adapter and a stacking kit. For qualification and maintenance, we arrange calibration, IQ/OQ/PQ and maintenance services. Should you have specific requirements or any questions regarding the appropriate equipment, we will be happy to advise you personally.

Certification marks: GS (VDE)
Volume: 32 l
Skip product gallery

Matching accessories

In stock
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E28884 for size 30
Manufacturer number: E28884
Manufacturer's RRP: €55.04
In stock
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718
Manufacturer's RRP: €41.28
In stock
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719
Manufacturer's RRP: €108.36
In stock
memmert untergestell nivellierbar
Memmert levelling base frame B29745, height 600 mm, for size 30
Manufacturer number: B29745
Manufacturer's RRP: €266.60
In stock
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768
Manufacturer's RRP: €46.44
In stock
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744
Manufacturer's RRP: €61.92
In stock
Memmert Wandkonsole
Memmert wall bracket B29755 for size 30
Manufacturer number: B29755
Manufacturer's RRP: €231.34
In stock
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68506 for size 30
Manufacturer number: B68506
Manufacturer's RRP: €103.20
In stock
memmert untergestell fahrbar
Memmert mobile base frame B29746, height 660 mm, for size 30
Manufacturer number: B29746
Manufacturer's RRP: €389.58
In stock
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02070 for size 30
Manufacturer number: B02070
Manufacturer's RRP: €67.94
In stock
memmert boden abtropfschale
Memmert stainless steel base drip tray B04356 for size 30
Manufacturer number: B04356
Manufacturer's RRP: €103.20
In stock
Memmert levelling base frame B33657, height 130 mm, for size 30
Manufacturer number: B33657
Manufacturer's RRP: €208.98