Sauter DB 0.5-4 torque meter 0.5 Nm / 0.1 mNm, tool holder 20 mm and 3/8 inch
€1,575.00
% Manufacturer's RRP: €1,750.00 10% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Sauter DB 0.5-4 torque meter 0.5 Nm / 0.1 mNm, tool holder 20 mm and 3/8 inch"
The Sauter DB is a digital torque meter for testing tools. Nine models cover measuring ranges from 0.5 Nm to 500 Nm: DB 0.5-4, DB 1-4, DB 5-3, DB 10-3, DB 20-3, DB 50-2, DB 100-2, DB 200-2 and DB 500-2. According to the data sheet, the measurement accuracy is ± 0.5 % of maximum; the usable measuring range is 5 % to 100 % of maximum; and the overload protection is set at 120 %. The metal housing is painted and the graphic LCD is backlit. Each model is supplied with a rotary transducer and a carrying case.
Measurement and evaluation
Sauter specifies the DB for testing torque wrenches, electric hand screwdrivers and cordless screwdrivers. A screwdriving simulator enables the dynamic testing of electric screwdrivers. The device measures in both directions of rotation; the measurement frequency is 1,000 Hz. The peak-hold function records the peak value, whilst the track function displays the value continuously. Upper and lower limit values are programmable and are indicated visually and acoustically. An illuminated strip shows the remaining measuring range. The internal memory stores up to 500 measured values; RS-232 and USB interfaces are available.
Units and battery
The following units are selectable: Nm, kgf/cm, kgf/m, in/lbs and ft/lbs. The internal NiMH battery (charging time 14 hours; operating time up to 18 hours without backlighting, according to the data sheet) is included in the scope of delivery. The auto-off time is adjustable between 1 minute and 60 minutes.
Applications and use
Sauter cites workshops, testing laboratories, tool and mould making, as well as service and maintenance, as the main areas of application. Typical tasks:
- Workshops and service: Regularly testing torque wrenches and cordless screwdrivers
- Test laboratory: Save measured values and transfer them via RS-232 or USB
- Tool and mould making: Checking bolted joints using the limit value function
Models at a glance
| Model | Measuring range (max) | Usable from (5 % of max) | Readability (d) | Tool holder | Overall dimensions (W x D x H) | Net weight approx. | Factory calibration (item no.) |
|---|---|---|---|---|---|---|---|
| DB 0.5-4 | 0.5 Nm | 0.025 Nm | 0.1 mNm | 20 mm and 3/8 inch | 180 x 110 x 60 mm | 2.2 kg | 961-120 |
| DB 1-4 | 1 Nm | 0.05 Nm | 0.2 mNm | 20 mm and 3/8 inch | 180 x 110 x 56 mm | 2.2 kg | 961-120 |
| DB 5-3 | 5 Nm | 0.25 Nm | 0.001 Nm | 20 mm and 3/8 inch | 200 x 100 x 50 mm | 2.4 kg | 961-120 |
| DB 10-3 | 10 Nm | 0.5 Nm | 0.002 Nm | 20 mm and 3/8 inch | 180 x 110 x 55 mm | 2.2 kg | 961-120 |
| DB 20-3 | 20 Nm | 1 Nm | 0.005 Nm | 20 mm and 3/8 inch | 220 x 110 x 50 mm | 3.4 kg | 961-120 |
| DB 50-2 | 50 Nm | 2.5 Nm | 0.01 Nm | 20 mm and 3/8 inch | 220 x 110 x 60 mm | 3.4 kg | 961-120 |
| DB 100-2 | 100 Nm | 5 Nm | 0.02 Nm | 3/8 inch | 200 x 100 x 50 mm | 3.2 kg | 961-120 |
| DB 200-2 | 200 Nm | 10 Nm | 0.05 Nm | 1/2 inch | 200 x 100 x 50 mm | 3.2 kg | 961-120 |
| DB 500-2 | 500 Nm | 25 Nm | 0.1 Nm | 3/4 inch | 220 x 110 x 55 mm | 4.0 kg | 961-120 |
Technical data
| Measuring principle | Rotary transducer, measurement frequency 1,000 Hz |
|---|---|
| Measurement accuracy | ± 0.5 % of max (data sheet) |
| Overload protection | 120 % of max |
| Display | 128 x 64 graphic LCD, backlit |
| Housing | Metal, painted, rubber feet |
| Units | Nm, kgf/cm, kgf/m, in/lbs, ft/lbs |
| Memory | up to 500 individual readings |
| Interfaces | RS-232 as standard, USB device |
| Power supply | Mains power supply, 100 V to 240 V, with adaptors for the EU and Switzerland |
| Battery | NiMH, internal, charging time 14 hours, operating time up to 18 hours without backlighting |
| Ambient temperature | 15 °C to 35 °C |
| Accessories (also available) | USB cable FL-A01 |
| Warranty (manufacturer) | 36 months according to Kern, excluding wearing parts |
| Scope of delivery | Torque meter with rotary transducer, carrying case, internal NiMH battery and mains adaptor with plugs for the EU and Switzerland |
Calibration
Factory calibration can be ordered separately, item no. 961-120. The item number is also listed in the table.
Warranty
According to Kern & Sohn, these devices come with a 3-year warranty. Kern offers a 3-year warranty on products with a list price of €500 or more and a 2-year warranty on products below this price, as well as on components; this excludes wearing parts such as batteries and rechargeable batteries. Warranty repairs are carried out by Kern itself or by a Kern specialist dealer.
Downloads
Regulatory information
As electrical appliances, the torque meters are subject to the Electrical and Electronic Equipment Act (ElektroG). Kern & Sohn GmbH, as the manufacturer of the Sauter brand, is registered under WEEE registration number DE 80821200. Information on returning end-of-life equipment can be found on the Environment and Disposal page.
Individual requirements and procurement service
USB cables and optional software for transferring stored data are also available. Enquiries are handled by our procurement service.
| Design: | DB 0.5-4 · 0,5 Nm |
|---|---|
| Power supply: | Mains operation |