Skip to main content Skip to search Skip to main navigation

Sauter FS 500G gravestone tester 500 N / 0.1 N

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Sauter FS 500G gravestone tester 500 N / 0.1 N"

The Sauter FS 500G is an electronic gravestone tester (tilt tester) with a 3.5-inch touchscreen and stylus. The measuring range is 500 N with a readability of 0.1 N; according to the data sheet, the measurement accuracy is 0.1 % of the maximum, and the overload protection is 150 %. The plastic housing measures 71 x 31 x 180 mm; the device weighs approximately 1.4 kg and measures both tensile and compressive forces. Sauter cites testing the stability of gravestones according to VSG 4.7.

Measurement and evaluation

A wide pressure plate with a foam rubber surface transfers the force to the gravestone without causing scratches; the handle is made of stainless steel with a plastic sleeve. The device features a tolerance function, a track function for continuous display, and peak value measurement. The internal memory has a capacity of 16 GB. According to Sauter, the device can also be used for applications other than gravestone testing thanks to its internal and external load cells.

Connection and battery

The USB interface is used for data transfer and power supply. According to the data sheet, the internal Li-ion battery lasts up to 8 hours without backlighting and 5 hours with backlighting; charging time is approximately 8 hours. The thread on the load receptor is M6 (external).

Applications and Use

Sauter cites cemetery authorities, technical inspection bodies and experts, stonemasonry firms, as well as landscaping and horticulture as the main areas of application. Typical tasks:

  • Cemetery administration: testing the stability of gravestones
  • Stonemasonry firms: Documenting inspections using stored measurement data
  • Experts and testing centres: Evaluating and transferring measurements via the touchscreen

Technical data

Measuring range500 N (tension and compression)
Readability0.1 N
Measurement accuracy0.1 % of maximum, as per the data sheet
Overload protection150 % of maximum
Memory16 GB
HousingPlastic, 71 x 31 x 180 mm, load receptor thread M6
Display3.5-inch touchscreen (TFT, colour, 320 x 480) with stylus
InterfaceUSB device (data and power supply)
BatteryLi-ion, internal, charging time 8 hours, operating time 8 hours without backlight and 5 hours with backlight
Power supplyExternal mains adaptor 100 V to 240 V AC, 50 / 60 Hz, with adaptor for the EU, USB-C
Net weight approx.1.4 kg
Accessories (also available)Schuko>UK mains adaptor YKA-01; Screw clamp with jaws AC 14; Standard attachments AC 43; Screw clamp with jaws AC 14R; Screw clamp with jaws AE 500; Weighing/force load cell CS 25-3P1, rated load 25 kg / 250 N; Weighing/force load cell CS 50-3P1, rated load 50 kg / 500 N; Weighing/force load cell CS 50-3Q1, rated load 50 kg / 500 N; Weighing/force load cell CS 100-3P1, rated load 100 kg / 1 kN; Weighing/force load cell CS 150-3P1, rated load 150 kg / 1.5 kN; Weighing/force load cell CS 250-3P1, rated load 250 kg / 2.5 kN; Weighing/force load cell CS 500-3P1, rated load 500 kg / 5 kN; Weighing/force load cell CS 600-3P1, rated load 600 kg / 6 kN; Weighing/force load cell CS 750-3P1, rated load 750 kg / 7.5 kN; Weighing/force load cell CS 1000-3P1, rated load 1,000 kg / 10 kN; Weighing/force load cell CS 1500-3P1, rated load 1,500 kg / 15 kN; Weighing/force load cell CS 2000-3P1, rated load 2,000 kg / 20 kN; Weighing/force load cell CS 2500-3P1, rated load 2,500 kg / 25 kN; Weighing/force load cell CS 5000-3P1, rated load 5,000 kg / 50 kN; Weighing/force load cell CS 7500-3P1, rated load 7,500 kg / 75 kN; Weighing/force load cell CS 10000-3P1, rated load 10,000 kg / 100 kN; Weighing/force load cell CS 15000-3P1, rated load 15,000 kg / 150 kN; Weighing/force load cell CS 20000-3P1, rated load 20,000 kg / 200 kN; Weighing/force load cell CS 30000-3P1, rated load 30,000 kg / 300 kN; Weighing/force load cell CS 100-3Q1, rated load 100 kg / 1 kN; Weighing/force load cell CS 150-3Q1, rated load 150 kg / 1.5 kN; Weighing/force load cell CS 200-3Q1, rated load 200 kg / 2 kN; Weighing/force load cell CS 300-3Q1, rated load 300 kg / 3 kN; Weighing/force load cell CS 500-3Q1, rated load 500 kg / 5 kN; Weighing/force load cell CS 750-3Q1, rated load 750 kg / 7.5 kN; Weighing/force load cell CS 1000-3Q1, rated load 1,000 kg / 10 kN; Weighing/force load cell CS 1500-3Q1, rated load 1,500 kg / 15 kN; Weighing/force load cell CS 2000-3Q1, rated load 2,000 kg / 20 kN; Weighing/force load cell CS 3000-3Q1, rated load 3,000 kg / 30 kN; Weighing/force load cell CS 5000-3Q1, rated load 5,000 kg / 50 kN; Weighing/force load cell CS 6000-3Q1, rated load 6,000 kg / 60 kN; Weighing/force load cell CD 20-3P1, rated load 20,000 kg / 200 kN; Weighing/force load cell CR 2500-1Q1, rated load 2,500 kg / 25 kN; Weighing/force load cell CR 5000-1Q1, rated load 5,000 kg / 50 kN; Weighing/force load cell CR 10000-1Q1, rated load 10,000 kg / 100 kN; Weighing/force load cell CR 20000-1Q1, rated load 20,000 kg / 200 kN; Weighing/force load cell CR 30000-1Q1, rated load 30,000 kg / 300 kN; Weighing/force load cell CR 60-3P1, rated load 60 kg / 600 N; Weighing/force load cell CR 130-3P1, rated load 130 kg / 1.3 kN; Weighing/force load cell CR 500-3P1, rated load 500 kg / 5 kN; Weighing/force load cell CR 250-3P1, rated load 250 kg / 2.5 kN; Weighing/force load cell CR 2000-3P1, rated load 2,000 kg / 20 kN; Weighing/force load cell CO 10-Y1, rated load 10 kg / 100 N; Weighing/force load cell CO 100-Y1, rated load 100 kg / 1 kN; Weighing/force load cell CO 500-Y1, rated load 500 kg / 5 kN; Weighing/force load cell CO 10-Y2, rated load 10 kg / 100 N; Weighing/force load cell CO 100-Y2, rated load 100 kg / 1 kN; Weighing/force load cell CS 5000-3P2, rated load 5,000 kg / 50 kN; Adapter AFM 05; Adapter AFM 06; Adapter AFM 07; Adapter AFM 12; Adapter AFM 15; Weighing/force load cell CO 20-Y1, rated load 20 kg / 200 N; Weighing/force load cell CO 50-Y1, rated load 50 kg / 500 N; Weighing/force load cell CO 200-Y1, rated load 200 kg / 2 kN; Weighing/force load cell CO 1000-Y1, rated load 1,000 kg / 10 kN; Weighing/force load cell CO 2000-Y1, rated load 2,000 kg / 20 kN; Weighing/force load cell CO 20-Y2, rated load 20 kg / 200 N; Weighing/force load cell CO 50-Y2, rated load 50 kg / 500 N; Weighing/force load cell CO 200-Y2, rated load 200 kg / 2 kN; Weighing/force load cell CO 500-Y2, rated load 500 kg / 5 kN; Weighing/force load cell CO 1000-Y2, rated load 1,000 kg / 10 kN; Weighing/force load cell CO 2000-Y2, rated load 2,000 kg / 20 kN; Weighing/force load cell CS 50-3P2, rated load 50 kg / 500 N; Weighing/force load cell CS 100-3P2, rated load 100 kg / 1 kN; Weighing/force load cell CS 250-3P2, rated load 250 kg / 2.5 kN; Weighing/force load cell CS 500-3P2, rated load 500 kg / 5 kN; Weighing/force load cell CS 1-Y1, rated load 1 kg / 10 N; Weighing/force load cell CS 2-Y1, rated load 2 kg / 20 N; Weighing/force load cell CS 5-Y1, rated load 5 kg / 50 N; Weighing/force load cell CS 10-Y1, rated load 10 kg / 100 N; Weighing/force load cell CS 20-Y1, rated load 20 kg / 200 N; Weighing/force load cell CO 5-Y3, rated load 5 kg / 50 N; Weighing/force load cell CO 10-Y3, rated load 10 kg / 100 N; Weighing/force load cell CO 10-Y4, rated load 10 kg / 100 N; Weighing/force load cell CO 5-Y4, rated load 5 kg / 50 N; Weighing/force load cell CS 2000-3P2, rated load 2,000 kg / 20 kN; Weighing/force load cell CS 7500-3P2, rated load 7,500 kg / 75 kN; A/D converter module FS 34; Weighing/force load cell CR 500-1Y1, rated load 500 kg / 5 kN; Weighing/force load cell CR 1000-1Y1, rated load 1,000 kg / 10 kN; Weighing/force load cell CR 5000-1Y1, rated load 5,000 kg / 50 kN; Weighing/force load cell CR 10000-1Y1, rated load 10,000 kg / 100 kN; Weighing/force load cell CR 20000-1Y1, rated load 20,000 kg / 200 kN; Standard clamp AE 01; Standard clamp AE 02; Strap clamp AE 03; Strap clamp AE 04; Rope and thread clamp AE 05; Cable pull-off clamp AE 06; Wedge clamp with jaws AE 07; Weighing/force load cell CO 1-Y5, rated load 1 kg / 10 N; Weighing/force load cell CO 0.5-Y5, rated load 500 g / 5 N; Weighing/force load cell CO 5-Y5, rated load 5 kg / 50 N; Weighing/force load cell CO 10-Y5, rated load 10 kg / 100 N; Stainless steel handle with plastic sleeve AFK 02; Pressure plate AE 08; EU mains adaptor FS-E07
Warranty (manufacturer)36 months according to Kern, excluding wearing parts
Scope of deliveryFS 500G gravestone tester with pressure plate AE 08 and handle AFK 02, internal Li-ion battery and mains adaptor

Calibration

A factory calibration certificate can be ordered separately: tensile force 961-161, compressive force 961-261 or tensile and compressive force 961-361. A DAkkS calibration certificate can also be ordered: tensile force 963-161, compressive force 963-261 or tensile and compressive force 963-361.

Warranty

According to Kern & Sohn, this device comes with a 3-year warranty. Kern offers a 3-year warranty on products with a list price of €500 or more and a 2-year warranty on products below this price, as well as on components; this excludes wearing parts such as batteries and rechargeable batteries. Warranty repairs are carried out by Kern itself or by a Kern specialist dealer.

Downloads

Regulatory information

As an electrical appliance, the gravestone tester is subject to the German Electrical and Electronic Equipment Act (ElektroG). Kern & Sohn GmbH, as the manufacturer of the Sauter brand, is registered under WEEE registration number DE 80821200. Information on returning end-of-life equipment can be found on the Environment and Disposal page.

Individual requirements and procurement service

Clamping jaws, adaptors, pressure plates and other force measurement accessories are also available. Enquiries are handled by our procurement service.

Power supply: Mains operation