Unigloves Select Black Latex Gloves, black, powder-free (sizes XS to XL), M, GT2403
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Unigloves Select Black Latex Gloves, black, powder-free (sizes XS to XL), M, GT2403"
Anyone who works with their hands all day, whether at the tattoo chair, in the laboratory or in the kitchen, needs a glove that doesn’t compromise tactile sensitivity and grip for the sake of safety. The manufacturer specifically markets the Unigloves Select Black latex gloves, under the name suffix ‘Der Kreative’ (The Creative One), for tattoo artists and other precision trades where dexterity is crucial to the quality of the work. Unlike the nitrile gloves in the Pearl range, Select Black is made from natural latex with micro-textured fingertips and palms for extra grip, a rolled cuff and a matt black finish. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL.
Latex instead of nitrile: greater elasticity, a different situation regarding allergies
Natural latex moulds more closely to the hand than nitrile and is therefore perceived by many users as more comfortable during prolonged wear, one reason why Unigloves specifically targets this range at tattoo artists who work for hours on end. According to the data sheet, the palm has a thickness of 0.11 ± 0.03 mm, and the fingertips 0.13 ± 0.03 mm, both measured as a single layer. According to the manufacturer, the glove is thiuram-free, meaning it contains no vulcanisation accelerators, which frequently trigger contact allergies. However, unlike the fully synthetic nitrile gloves in the Pearl range, Select Black, being a natural rubber product, does contain proteins: for staff with a natural latex allergy, a nitrile glove such as the Unigloves Black Pearl is the more suitable choice, not Select Black.
Chemical protection according to EN 374, Category III, Type B, tested against three chemicals
Select Black is classified as a chemical protective glove according to EN ISO 374-1, Category III, Type B, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. The data sheet lists three test chemicals with numerical values for this glove: 40 % caustic soda achieves permeation level 6 with a degradation rate of minus 55.11 %, 30 % hydrogen peroxide at Level 2 with a degradation rate of plus 9.7 %, and 37 % formaldehyde at Level 2 with a degradation rate of minus 12.4 %. For other chemicals, the manufacturer’s product-specific chemical resistance table continues to apply.
Tested according to EN 455, PPE Category III
The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of watertightness with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class.
Choosing the right size
The manufacturer also assigns a numerical glove size to each Select Black size, ranging from 5 to 6 for XS to 9 to 10 for XL. These figures are based on hand circumference in inches, measured at the widest point of the hand excluding the thumb, and help when comparing sizes with other PPE gloves.
| Size | Manufacturer’s item no. | Glove size | Width | Length |
|---|---|---|---|---|
| XS | GT2401 | 5-6 | 75 mm (± 5 mm) | ≥ 240 mm |
| S | GT2402 | 6-7 | 85 mm (± 5 mm) | ≥ 240 mm |
| M | GT2403 | 7-8 | 95 mm (± 5 mm) | ≥ 240 mm |
| L | GT2404 | 8-9 | 105 mm (± 5 mm) | ≥ 240 mm |
| XL | GT2405 | 9-10 | 120 mm (± 10 mm) | ≥ 240 mm |
Select Black or Select Black 300: choosing the right length
Within the black Unigloves latex range, the two Select Black variants differ primarily in their length. The Select Black described here, with a standard length (≥ 240 mm), is suitable for most applications in laboratories, catering and studios. Those who need additional protection on the wrist and forearm, for example, during longer tattoo sessions or when washing up and cleaning in the kitchen, will find Select Black 300, with a cuff length of around 295 mm, to be a suitable addition. It offers the same colour and the same chemical protection profile, but with a thicker palm (0.16 instead of 0.11 mm). For staff with a natural latex allergy, switching to a nitrile colour such as Black Pearl from the nitrile glove range is the right alternative.
Use, storage and disposal
Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand.
Typical applications
The combination of elasticity, grip and an unobtrusive black appearance makes Select Black particularly attractive for tasks where dexterity is paramount:
- Tattoo and piercing studios, for which the manufacturer has specifically developed the range
- Cosmetic and beauty treatments requiring a high degree of tactile sensitivity
- Catering and food processing (food contact suitability according to the manufacturer)
- Laboratory work with a documented need for chemical resistance to caustic soda, hydrogen peroxide or formaldehyde, provided there is no natural latex allergy
The following applies to all these sectors: where latex is ruled out due to allergies, the nitrile Pearl range offers a synthetic alternative with the same basic features of textured fingertips and a rolled cuff.
Assessing requirements correctly: from the carton to the session
The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. In a tattoo or piercing studio, assuming 2 to 4 pairs of gloves per client appointment (changed during breaks or if soiled), a box of 100 pieces, i.e. 50 pairs, covers approximately 12 to 25 appointments, whilst a whole carton covers 125 to 250 appointments. In a laboratory or catering establishment, assuming a consumption of 10 gloves per workstation per day, one box lasts for approximately two working weeks, whilst a whole carton lasts for around 20 working weeks. The product is sold exclusively in whole cartons; a single box of 100 cannot be selected separately during the ordering process.
Frequently asked questions about the 1,000-piece carton
Is Select Black suitable for people with a latex allergy?
No. The glove is made of natural latex and therefore contains proteins, unlike the fully synthetic nitrile gloves in the Pearl range. If you have a known natural latex allergy, a nitrile glove is suitable.
What has Select Black been specifically developed for?
The manufacturer positions the range under the name suffix ‘Der Kreative’ (The Creative One), specifically for tattoo artists and other precision professions with high demands on tactile sensitivity and grip.
How resistant is the glove to chemicals?
The data sheet lists three test chemicals with numerical values: 40 % caustic soda (Level 6, minus 55.11 % degradation), 30 % hydrogen peroxide (Level 2, plus 9.7 %) and 37 % formaldehyde (Level 2, minus 12.4 %). The data sheet does not specify breakthrough times in minutes, only the permeation levels.
How does Select Black differ from Select Black 300?
Mainly in terms of length: Select Black has a cuff of at least 240 mm, whilst Select Black 300 has a cuff of around 295 mm for additional wrist protection, as well as a thicker palm (0.16 mm instead of 0.11 mm). The colour, certification and chemical profile are identical for both.
How do I find the right size?
Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above.
Can I order quantities smaller than a 1,000-piece carton?
No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each.
Technical details
| Material | Latex (natural rubber) |
|---|---|
| Colour | Black |
| Packaging | 100 pieces per box, 10 boxes per carton (1,000 pieces in total) |
| Length | ≥ 240 mm |
| Width per size | XS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) |
| Glove size per size | XS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 |
| Thickness at the palm | 0.11 ± 0.03 mm |
| Fingertip thickness | 0.13 ± 0.03 mm |
| Median force at break (before/after ageing) | min. 6.0 N |
| AQL | 1.5 |
| Chemical resistance (EN 374-4) | 40 % caustic soda, Level 6 (-55.11 %), 30 % hydrogen peroxide, Level 2 (+9.7 %), 37 % formaldehyde, Level 2 (-12.4 %) |
| Features | Powder-free, thiuram-free, micro-textured fingertips and palm, rolled cuff, ambidextrous, food-safe |
| Sterility | Non-sterile, for single use |
| Standards | EN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type B), EN ISO 374-5 |
| PPE category | III (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) |
Scope of delivery
- 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Select Black latex gloves (size as per variant selection)
Individual requirements and procurement service
Do you require a different size, the extra-long Select Black 300, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to support you with the suitable selection.
| Colour: | Black |
|---|---|
| Size : | M |