Weidmüller DKT 4/35 disconnect and test-disconnect terminal block, screw terminals, 4 mm², 10 A, 400 V
€11.90
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Weidmüller DKT 4/35 disconnect and test-disconnect terminal block, screw terminals, 4 mm², 10 A, 400 V"
The Weidmüller DKT 4/35, with order number 0687460000, is a two-tier disconnect and test-disconnect terminal block in beige. It has four screw terminals, a rated cross-section of 4 mm² and is rated for 10 A and 400 V. The housing is made of PA 66 of flammability class UL 94 V-2 and snaps onto the TS 35 mounting rail. It is 6 mm wide, 65 mm high and 56.5 mm deep. One terminal block weighs 16.13 g net.
The connection cross-section ranges from 0.13 to 4 mm² for single- and multi-strand conductors; for fine-strand conductors with ferrule terminals according to DIN 46228/1, it ranges from 0.13 to 2.5 mm²; and with twin ferrule terminals, it ranges from 0.5 to 1.5 mm² (AWG 26 to 12); the clamping screw is an M3 with a tightening torque of 0.5 to 1 Nm, and the stripping length is 9 mm. The two tiers are not internally bridged. The data sheet cites IEC 60947-7-1 as the standard; for pollution degree 3, a rated impulse voltage of 6 kV applies. According to UL (certificate no. E60693), the data sheet specifies 300 V and 10 A for Group C; according to CSA (certificate no. 12400-281), it specifies 300 V and 25 A.
Technical data
| Type | Disconnect and test-disconnect terminal block, 2 tiers |
|---|---|
| Connection type | Screw terminals, 4 terminals |
| Rated cross-section | 4 mm² |
| Terminal cross-section | 0.13 to 4 mm² (single and multi-strand), 0.13 to 2.5 mm² (fine-stranded with ferrule according to DIN 46228/1), 0.5 to 1.5 mm² (twin ferrule), AWG 26 to 12 |
| Rated voltage | 400 V, rated voltage DC 400 V |
| Rated current | 10 A |
| Rated impulse voltage | 6 kV |
| Tightening torque | 0.5 to 1 Nm |
| Material / Colour | PA 66, beige |
| Mounting type | snapped onto TS 35 mounting rail |
| Dimensions (W x H x D) | 6 x 65 x 56.5 mm |
| Ambient temperature | -60 to +85 °C |
| Operating temperature range | -50 to +100 °C |
| Storage temperature | -25 to +55 °C |
| Standards | IEC 60947-7-1 |
| Scope of delivery | Terminal block |
Application and use
Weidmüller states in the data sheet that, for some applications, a test tap or an isolating element on the feed-through terminal is advisable for testing and safety purposes. Test-disconnect terminal blocks allow circuits to be measured whilst de-energised. Clearances and creepage distances at the disconnect points are not assessed dimensionally; the specified rated impulse withstand voltage must be verified. The terminal is intended as a replacement in existing installations.
The data sheet specifies that the right-hand side is open and that a cover plate is required. Among the accessories listed by Weidmüller are cross-connectors from the QB WI RA6 IS series with 2 to 4 poles, the AP DKT4 PA cover plate, the TW SAKS2 HP/DBR/2 partition and the PS 2.3 RT test adapter (230 V, 20 mA).
| Product type: | Terminal block |
|---|---|
| Rated current: | 10 A |