Skip to main content Skip to search Skip to main navigation

Weidmüller HDC HVE 10+2 MS HDC insert, male, 12-pin, 830 V, screw terminals, size 8

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Weidmüller HDC HVE 10+2 MS HDC insert, male, 12-pin, 830 V, screw terminals, size 8"

The Weidmüller HDC HVE 10+2 MS, with order number 1651350000, is a plug-in insert with pin contacts for heavy-duty size 8 connectors. It has twelve poles, comprising ten power contacts and two signal contacts. The terminals are screw terminals; the PE terminal is also a screw terminal. According to DIN EN 61984, it is designed for a rated voltage of 830 V and a rated current of 20 A. The insert is beige, made from glass-fibre-reinforced PC and fitted with two trailing contacts.

The contact surface consists of passivated silver; the data sheet specifies a copper alloy as the material. The contact resistance is a maximum of 2 mΩ. The PE terminal has a rated cross-sectional area of 4 mm². The tightening torques are 0.5 to 0.55 Nm for the main contacts and 1.2 to 1.5 Nm for the PE terminal; the fixing screw is an M4.

Technical data

Series / TypeHVE, pin
Number of poles12 (10 power contacts, 2 signal contacts)
Size8
Connection typeScrew terminals, PE terminal screwed in
Rated voltage (DIN EN 61984)830 V
Rated current (DIN EN 61984)20 A
Rated voltage according to UL/CSA600 V AC/DC
Rated impulse voltage8 kV
Conductor cross-section0.5 to 4 mm² (solid and stranded)
Mating cycles≥ 500
Insulation materialGlass fibre-reinforced PC, insulating material group IIIa, UL 94 V-0
Contact surfacePassivated silver
Limiting temperature-40 to +125 °C
Dimensions (W x H x L)34 x 35.7 x 111 mm
Scope of delivery1 piece

Application and use

Plug-in inserts for heavy-duty connectors carry power and signals through a single connection, for example in drives and motors used in conveyor systems or machine tools. The configuration of ten power contacts and two signal contacts allows both the load and the control signals to be routed via a single connector. The insulating material is UL-listed and railway-qualified; the insert is halogen-free; and the data sheet specifies low smoke emission according to DIN EN 45545-2.

The data sheet lists codes such as DSTV COBU5 and DSTV COST4 as accessories. Suitable hoods and housings are available on request via our procurement service.

Product type: Connector
Series: Weidmüller HDC