Weidmüller TRS 24VDC 1CO TERMSERIES relay coupler, 1 changeover contact, 24 V DC, 6 A
€6.28
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Weidmüller TRS 24VDC 1CO TERMSERIES relay coupler, 1 changeover contact, 24 V DC, 6 A"
The Weidmüller TRS 24VDC 1CO, with order number 1122770000, is a relay coupler from the TERMSERIES range. It features a changeover contact with an AgNi contact that switches 6 A at 250 V AC and is powered by 24 V DC ±20 %. The rated control current is 11.5 mA at a rated power of 280 mW. A green LED serves as a status indicator, whilst a free-wheeling diode and reverse polarity protection safeguard the control side. The coupler is 6.4 mm wide, has screw terminals and is mounted on a TS 35 mounting rail.
The maximum switching voltage on the load side is 250 V AC and 250 V DC; the resistive switching power at 24 V DC is 144 W; the inrush current may reach 20 A for 20 ms. The data sheet specifies the minimum switching capacity as 1 mA at 24 V, 10 mA at 12 V and 100 mA at 5 V. The turn-on delay is a maximum of 6 ms, and the turn-off delay a maximum of 16 ms. The housing has a flammability rating of UL 94 V-0.
Technical data
| Series | TERMSERIES |
|---|---|
| Contact configuration | 1 changeover contact, AgNi |
| Rated control voltage | 24 V DC ±20 % |
| Rated control current / rated power | 11.5 mA / 280 mW |
| Rated switching voltage | 250 V AC |
| Continuous current | 6 A |
| AC switching capacity (resistive) | max. 1,500 VA |
| Mechanical service life | 5 × 10⁶ operations |
| Connection | Screw terminals, 0.14 to 2.5 mm² |
| Dimensions (W x H x D) | 6.4 × 89.6 × 87.8 mm |
| Protection class | IP20 |
| Ambient temperature | -40 to +60 °C |
| Status indicator | Green LED |
| Scope of delivery | Relay coupler |
Application and use
Relay couplers convert weak control signals from a PLC into load circuits and keep the control and load sides electrically isolated. The changeover contact with AgNi contacts has a continuous current rating of 6 A at 250 V AC; there is reinforced insulation between the control and load sides with a creepage distance and clearance of at least 6 mm.
The data sheet lists accessories for the TERMSERIES, including partition plates, power supply modules, TCC series cross-connectors and WS 10/6 terminal markers. According to the data sheet, the coupler has neither a test button nor a mechanical position indicator; the green LED serves as the indicator.
| Product type: | Coupling relay |
|---|---|
| Series: | Weidmüller TERMSERIES |
| Supply voltage: | 24 V DC |