Skip to main content Skip to search Skip to main navigation

IKA DK 25.11 Flow-through chamber, for inline and batch operation (UTL 25), 0002518000

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA DK 25.11 Flow-through chamber, for inline and batch operation (UTL 25), 0002518000"

Bridging the gap between batch and continuous processes: the IKA DK 25.11 flow-through chamber

In modern process engineering product development, pharmaceutical synthesis and industrial cosmetics manufacturing, the scale-up from batch laboratory processes to continuous production represents one of the greatest technological challenges. Traditional dispersion in so-called batch operation (the processing of a defined quantity in an open beaker or closed reactor) quickly reaches its economic and physical limits in mass production or when processing extremely large volumes. To overcome precisely this process-related limitation, IKA has developed the DK 25.11 flow-through chamber (MPN 0002518000). This component is the centrepiece for transforming your existing laboratory dispersion system into a fully-fledged, continuously operating in-line homogeniser, such as the UTL 25 digital Inline ULTRA-TURRAX system. With this accessory, you can take your sample preparation from a static laboratory environment to a dynamic, industrial production level.

In-line dispersion (continuous flow process)

The physical principle behind the IKA DK 25.11 flow-through chamber is simple. The chamber is fitted directly around the rotating dispersing tool with a positive-lock connection. Instead of lowering the dispersing tool into a static vessel, the liquid medium to be processed is actively pumped or drawn into the chamber via a hose system. The chamber is equipped with the following connections for this purpose: the inlet is optimised for hoses with an internal diameter of 13 millimetres, whilst the outlet is designed for 9-millimetre hoses. As soon as the liquid flows into the chamber through the 13-mm inlet, it is forced through the high-shear zone between the rotor and the stator of the clamped dispersing tool. There, the particles are subjected to mechanical impact and shear forces before the now emulsified or homogenised dispersion leaves the chamber via the 9-mm outlet. This continuous flow process (in-line operation) supports a uniform, reproducible energy input into the sample.

A double benefit: reducing air ingress in batch operation

The IKA DK 25.11 can also be used in the classic beaker application. The chamber is ideally suited for use in modified batch operation. In this case, the flow-through chamber is also mounted around the dispersing tool. The key point for the user: during operation, the chamber must be positioned entirely below the liquid surface of the medium. This complete enclosure of the high-shear zone suppresses the typical deep vortex formation within the vessel. There is no unwanted air ingress caused by turbulence. Sensitive ingredients, active pharmaceutical ingredients (APIs) or oils susceptible to oxidation are thus less exposed to contact with atmospheric oxygen. Furthermore, foaming with surfactant-containing samples can be reduced.

System integration and vacuum compatibility

As an original IKA accessory, the DK 25.11 flow-through chamber belongs to the existing product range. It is a component of the UTL 25 digital Inline ULTRA-TURRAX system. To commission the system, you need the appropriate ‘IL’ (Inline) special tools. The chamber is compatible with the dispersing tools S 25 KV - 25 G - IL and S 25 KV - 25 F - IL. These KV tools are fitted with high-quality mechanical seals. When combined with the DK 25.11 chamber, this creates a tightly closed system that allows operation under demanding vacuum conditions or even at a system pressure of up to 6 bar without any problems. To ensure a safe, stable and vibration-free installation in your plant, IKA also offers a matching mounting bracket, known as the AD 25 Mounting support.

Technical data

  • Operating modes: Inline operation (continuous flow) and modified batch operation
  • Compatible drive systems: Part of the UTL 25 digital Inline ULTRA-TURRAX system
  • Compatible dispersing tools: S 25 KV - 25 G - IL and S 25 KV - 25 F - IL
  • Hose connection, inlet: For 13 mm internal diameter
  • Hose connection, outlet: For 9 mm internal diameter
  • Pressure resistance: Suitable for operation under vacuum or at pressures up to 6 bar (in combination with the UTL 25 setup)
  • Advantage in batch operation: Prevents air ingress due to turbulence when fully submerged
  • Recommended mounting bracket: AD 25 Mounting support

Scope of delivery

  • 1 x IKA DK 25.11 flow-through chamber

(Important note: The essential dispersing drive, the special IL dispersing tools, the AD 25 holder and hoses are not included in the scope of delivery!)

Individual requirements & accessories

The DK 25.11 is a component that requires the correct system components. Please ensure that you also order one of the two special tools (S 25 KV - 25 G - IL or S 25 KV - 25 F - IL) for in-line operation. As in-line systems are often integrated into complex pipework or pump circuits, rigid and secure installation is recommended. We strongly recommend the AD 25 Mounting support for this purpose. If you wish to process highly viscous liquids, please note that the system is not self-priming and an external pump should be fitted upstream. Our procurement service will be happy to advise you on the design of your continuous UTL 25 inline system.

Skip product gallery

Fits

Discount In stock
IKA UTL 25 digital Inline ULTRA-TURRAX, continuous-flow disperser, 0010006856
IKA UTL 25 digital Inline ULTRA-TURRAX, continuous-flow disperser, 0010006856
Manufacturer number: 0010006856
Sale price: €9,061.50
RRP €12,082.00 25% below manufacturer's RRP