Skip to main content Skip to search Skip to main navigation

IKA UTL 25 digital Inline ULTRA-TURRAX, continuous-flow disperser, 0010006856

Scope of delivery: UTL 25 digital drive unit with DK 25.11 dispersing chamber and stand rod. The beakers, tubing and laboratory lifting platform shown in the illustration are not included.

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA UTL 25 digital Inline ULTRA-TURRAX, continuous-flow disperser, 0010006856"

Process reliability in continuous operation: The IKA UTL 25 digital Inline ULTRA-TURRAX

The IKA UTL 25 digital represents a specialised class of high-performance laboratory dispersers. Whilst conventional batch dispersers (immersion units) are held directly in an open beaker, the UTL 25 digital operates on the inline principle (continuous flow). This makes it suitable for experiments on industrial-scale processes, for producing fine emulsions with reduced air entrapment, and for processing in closed systems. The unit works with a speed range of up to 25,000 rpm on the rotor-stator principle.

The inline principle: why continuous flow rather than batch?

The IKA UTL 25 digital differs from conventional agitators. In inline dispersion, the medium is not swirled in an open vessel but is pumped through a closed working chamber (or conveyed by the suction effect of the rotor). This can be advantageous for demanding applications:

  1. Reduced air ingress: In open vessels, a ‘Trombe’ (vortex) often forms, drawing air into the product. This is undesirable in the case of creams, lotions or oxidation-sensitive substances. The UTL 25’s closed system reduces this.
  2. Controlled shearing: In batch operation, some particles pass through the shearing zone frequently, whilst others do so rarely. In inline operation, every particle must pass through the rotor-stator gap before leaving the outlet. This supports a homogeneous particle size distribution and reproducibility.
  3. Safety: As the system is sealed by hose connections, fewer vapours or aerosols escape. This is advantageous when working with toxic or volatile solvents.

Performance and digital control

At the heart of the IKA UTL 25 digital is a drive with a power consumption of 500 watts. It enables speeds ranging from 3,000 to 25,000 rpm. The high circumferential speed of the rotor tips generates high shear forces, which break down droplets and particles to the micro- or even nano-scale. The ‘digital’ designation stands for ease of use and process monitoring:

  • LED display: The speed is clearly displayed, enabling the precise setting of experimental parameters.
  • Timer function: Process times can be set to carry out standardised test series (SOPs).
  • Interface: The device can be controlled and monitored via USB (using the optional labworldsoft® software) to document speed-time profiles.

Scalability: From the laboratory to production

A key area of application for the IKA UTL 25 digital is ‘upscaling’. In the chemical and pharmaceutical industries, products are often manufactured in large-scale inline machines (for example, the IKA 2000 series). Results from simple beaker experiments often cannot be transferred to large-scale production. The UTL 25 digital simulates the fluid dynamics and shear conditions of large-scale machines on a laboratory scale. This can make it easier to transfer a formulation to production plants.

Flexibility in setup: recirculation vs. single-pass

The instrument can be operated in two modes:

  • Recirculation (loop): The outlet is reconnected to the inlet vessel via a hose. The product passes through the shear zone multiple times (‘multipass’). Suitable for achieving narrow particle size distributions.
  • Single-pass: The product is conveyed once from a feed vessel through the machine into a collection vessel. Suitable for continuous processes or where shear sensitivity is critical.

The rotor’s flow capacity is often sufficient to draw in low-viscosity media automatically. For higher-viscosity media, an upstream pump may be necessary to ensure flow.

Durability and cleaning

The working chamber and the dispersing tool are made of stainless steel. For cleaning, it is often sufficient to rinse the system whilst it is closed using a suitable solvent or cleaning agent (CIP, Cleaning in Place). However, the dispersing chamber can also be dismantled for thorough cleaning or sterilisation. An optional temperature sensor (PT 1000) can be connected directly to the unit to monitor the product temperature at the outlet, an important feature, as high shear forces always generate heat.

Application examples

  • Cosmetics: Production of ultra-fine emulsions for creams and lotions without air pockets.
  • Food: Homogenisation of dairy products, juices or sauces.
  • Chemicals: Dispersing pigments in paints or varnishes in a continuous flow.
  • Pharmaceuticals: Cell disruption or the production of active ingredient suspensions.

The IKA UTL 25 digital is suitable for laboratories that need to go beyond simple stirring. It transfers the inline principle of industrial production to laboratory scale.

Technical data

  • Motor power input/output: 500 W / 300 W
  • Speed range: 3,000 – 25,000 rpm
  • Max. viscosity: 5,000 mPas
  • Flow rate (H₂O): 4.4 – 11.6 l/min (depending on the tool/setup)
  • Display: LED
  • Timer: Yes
  • Volume range (circulation): unlimited (depending on the container)
  • Interface: USB
  • Connection for external temperature sensor: Yes (PT 1000)
  • Dimensions (W x H x D): 87 x 271 x 106 mm
  • Weight: 2.5 kg
  • Degree of protection: IP 20

Scope of delivery

  • 1 x IKA UTL 25 digital (drive unit)
  • 1 x dispersing chamber (DK 25.11 generator)
  • 1 x stand rod
  • 1 x USB cable
  • 1 x operating instructions

Warranty

Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Individual requirements & accessories

To set up a complete recirculation system, you will need tubing, stand components and, if necessary, a suitable container. Adapters for batch operation are also available. Please contact our procurement service for advice on the appropriate setup.

Skip product gallery

Matching accessories

Discount In stock
IKA S 25 KV - 25 G - IL Dispergierwerkzeug, Ø 25 mm, Inline, für UTL 25 digital
IKA S 25 KV - 25 G - IL Dispersing Tool, Ø 25 mm, In-line, for UTL 25 digital, 0002563000
Manufacturer number: 0002563000
Sale price: €2,697.00
RRP €3,596.00 25% below manufacturer's RRP
Discount In stock
IKA S 25 KV - 25 F - IL Dispergierwerkzeug, Ø 25 mm, Inline, für UTL 25 digital
IKA S 25 KV - 25 F - IL Dispersing Tool, Ø 25 mm, In-line, for UTL 25 digital, 0002830200
Manufacturer number: 0002830200
Sale price: €2,697.00
RRP €3,596.00 25% below manufacturer's RRP
Discount In stock
IKA DK 25.11 Flow-through chamber, for inline and batch operation (UTL 25), 0002518000
IKA DK 25.11 Flow-through chamber, for inline and batch operation (UTL 25), 0002518000
Manufacturer number: 0002518000
Sale price: €3,517.50
RRP €4,690.00 25% below manufacturer's RRP
Discount In stock
IKA AD 25 Mounting support, mounting bracket for DK 25.11, 0002562500
IKA AD 25 Mounting support, mounting bracket for DK 25.11, 0002562500
Manufacturer number: 0002562500
Sale price: €849.75
RRP €1,133.00 25% below manufacturer's RRP