IKA S 25 KV - 25 F - IL Dispersing Tool, Ø 25 mm, In-line, for UTL 25 digital, 0002830200
€2,697.00
% Manufacturer's RRP: €3,596.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 KV - 25 F - IL Dispersing Tool, Ø 25 mm, In-line, for UTL 25 digital, 0002830200"
25 mm stator, 18 mm rotor, 0.5 mm gap: the S 25 KV - 25 F - IL (0002830200) shares this geometry with the S 25 KV - 25 F vessel tool. However, the IL version is designed for the UTL 25 digital in-line disperser, which IKA specifies as the sole drive unit.
Sealed for horizontal operation
The fully sealed internal system prevents the sample from entering the main drive. Operation in a horizontal in-line position is therefore permitted. Vacuum levels up to 1 mbar and pressures up to 6 bar are permitted; the maximum operating temperature is 220 °C.
Dimensions, fineness and materials
At 25,000 rpm, the rotor reaches a peripheral speed of 23.6 m/s. The final fineness ranges from 5 to 25 µm for suspensions and 1 to 5 µm for emulsions. The installation length is short at 110 mm; the immersion depth is specified as 40 to 85 mm. Materials in contact with the product include FFPM, SiC, AISI 316L and AISI 302. The pH range is from 2 to 13; solvents are permitted, and sterilisation may be carried out using any method.
Typical applications
- In-flow dispersion using the UTL 25 digital
- Horizontal installation in in-line operation
- Suspensions with final particle sizes of 5 to 25 µm
- Emulsions with final particle sizes of 1 to 5 µm
- Processes with a vacuum down to 1 mbar or pressure up to 6 bar
- Media containing solvents in the pH range 2 to 13
Technical details
| Stator diameter | 25 mm |
|---|---|
| Rotor diameter | 18 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. permissible speed | 25,000 rpm |
| Maximum circumferential speed | 23.6 m/s |
| Immersion depth | 40 to 85 mm |
| Installation length | 110 mm |
| Materials in contact with the product | FFPM, SiC, AISI 316L, AISI 302 |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 220 °C |
| Sterilisability | all methods |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Final fineness of suspensions | 5 to 25 µm |
| Final fineness of emulsions | 1 to 5 µm |
Scope of delivery
- 1 x IKA S 25 KV - 25 F - IL dispersing tool (single tool)
- The UTL 25 digital inline disperser is not included in the scope of delivery.
Alternative rotor size for in-line operation
The S 25 KV - 25 G - IL has the same stator and the same gap but a 17 mm rotor, reaches 22.2 m/s and lists 15 to 50 µm for suspensions and 1 to 10 µm for emulsions. For the tool described here, the figures are 5 to 25 µm and 1 to 5 µm. The S 25 KV - 25 F vessel tool operates on T-25 drives, amongst others, and has an installation length of 270 mm with an immersion depth of 40 to 225 mm.
Individual requirements and procurement service
We can procure the UTL 25 digital in-line disperser and other accessories on request. The procurement service will put together the combination for your flow-through process.