IKA S 25 KV - 25 F Dispersing tool, Ø 25 mm, mechanical seal, for T 25, 0002404000
€2,044.50
% Manufacturer's RRP: €2,726.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 KV - 25 F Dispersing tool, Ø 25 mm, mechanical seal, for T 25, 0002404000"
The IKA S 25 KV - 25 F is a vacuum tool for T-25 drives and operates in volumes ranging from 100 millilitres to 2 l. It is mounted on a ball bearing with a mechanical seal; the counter ring and sliding ring are made of silicon carbide, whilst Kalrez rings are used as O-rings. This allows vacuum down to 1 mbar and a pressure of up to 6 bar.
Geometry and length
The stator diameter is 25 millimetres, the rotor measures 18 millimetres, and the gap is 0.5 millimetres. The installation length is 270 millimetres, and the immersion depth ranges from 40 to 225 millimetres. At 25,000 rpm, the circumferential speed is 23.6 metres per second. The final particle size is 5 to 25 micrometres for suspensions and 1 to 5 micrometres for emulsions.
Temperature and media
Materials in contact with the product are FFPM, SiC, AISI 316L and AISI 302. Operating temperatures of up to 220 °C are permissible for short periods; the pH range is from 2 to 13. Solvents are permitted, and sterilisation may be carried out using any method. The tool weighs 0.622 kilograms.
Drives and reactors
It is compatible with the T 25 digital, T 25 easy clean digital and T 25 easy clean control drives, as well as the LR 1000 basic and control systems and several versions of the LR-2.ST laboratory reactor.
Typical applications
- Dispersing under vacuum down to 1 mbar
- Processes under positive pressure up to 6 bar
- Emulsions with a final particle size of 1 to 5 µm
- Use in laboratory reactors of the LR 1000 and LR-2.ST series
- Batches using solvents up to 220 °C for short periods
Technical details
| Stator diameter | 25 mm |
|---|---|
| Rotor diameter | 18 mm |
| Stator/rotor gap width | 0.5 mm |
| Processable volume (H2O) | 0.1 to 2 l |
| Maximum permissible speed | 25,000 rpm |
| Maximum circumferential speed | 23.6 m/s |
| Immersion depth | 40 to 225 mm |
| Installation length | 270 mm |
| Bearing | Ball bearing with mechanical seal (SiC, Kalrez) |
| Material in contact with the product | FFPM, SiC, AISI 316L, AISI 302 |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature (short-term) | 220 °C |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Sterilisability | all methods |
| Final fineness of suspensions | 5 to 25 µm |
| Final particle size (emulsions) | 1 to 5 µm |
| Weight | 0.622 kg |
Scope of delivery
- 1 x IKA S 25 KV - 25 F dispersing tool (single tool)
- The drive is not included in the scope of delivery.
Related tools
The S 25 KV - 25 G is available with a rotor diameter of 17 millimetres and a working range of 50 millilitres to 2 l. For in-line operation on the UTL 25 digital, the S 25 KV - 25 G - IL is available.
Selection guide: a comparison
| Tool | Stator / Rotor | Working range (H2O) |
|---|---|---|
| S 25 KV - 25 F (this product) | 25 / 18 mm | 0.1 to 2 l |
| S 25 KV - 25 G | 25 / 17 mm | 0.05 to 2 l |
| S 25 KV - 25 G - IL | 25 / 17 mm | In-line operation |
Individual requirements and procurement service
We can source suitable drives, reactors and other vacuum equipment on request. The procurement service will assist with the selection.