IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000
€2,010.00
% Manufacturer's RRP: €2,680.00 25% below manufacturer's RRP
Scope of delivery: the T 25 digital drive unit only. The dispersing tool shown is not included and is available separately.
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000"
A formulation batch in a beaker, an emulsion in a 500-millilitre flask, a batch of cell suspension for sample preparation: the T 25 digital ULTRA-TURRAX is the classic drive unit for all tasks in everyday laboratory work involving volumes between 1 millilitre and 2 litres. It covers a speed range from 3,000 to 25,000 revolutions per minute and is supplied as a drive unit only, without a dispersing tool, so that each laboratory can choose the appropriate tool geometry itself.
Electronic speed control for reproducible batches
The speed can be adjusted continuously between 3,000 and 25,000 rpm, with a deviation of just 1 %. An LED display shows the set value directly, whilst electronic overload protection and an error code display ensure reliable operation. Without a tool fitted, the unit remains comparatively quiet at 75 dB(A); the maximum viscosity is 5,000 mPas. For batches that alternate between low- and medium-viscosity phases, the speed can be readjusted at any time during the process without switching off the unit.
Compact drive for the laboratory bench
Measuring 87 x 271 x 106 millimetres and weighing 2.5 kilograms, the T 25 digital takes up little bench space; the support arm measures 13 millimetres in diameter and 160 millimetres in length. The power input is 800 watts, whilst the power output is 500 watts. The unit operates at 220 to 240 volts at 50 or 60 hertz; a voltage variant of 100 to 120 volts is also available. Degree of protection IP 20 in accordance with DIN EN 60529 and a permissible duty cycle of 100 % round off the key technical specifications; the permissible ambient temperature range is from 5 to 40 °C with up to 80 % relative humidity.
Assemble tools and stand as required
As no dispersing tool is supplied, each laboratory selects the geometry to suit the application: reusable stainless steel tools such as the S 25 N - 18 G - ST (Ident 0004447300) or the S 25 N - 25 G (Ident 0001713300), as well as disposable plastic tools in two sizes for applications where cross-contamination between samples must be ruled out. The S 25 KV - 25 G dissolver tool (Ident 0002466900) is suitable for more viscous media. For stationary operation, the R 1826 plate stand (ID 0003160100) with R 182 boss head (ID 0002657700) is available; for cleaning, the TS 25-3 Cleaning Tool (ID 0020003013) or the disposable tube S 18/25-ET50 (ID 0003452500) are suitable for cleaning.
Typical applications
- Homogenisation of wastewater samples in environmental analysis
- Dispersion tasks in laboratory reactors
- Work under vacuum or pressure with suitable accessories
- Sample preparation in medical research
Selection guide: individual drive unit or complete set
If you do not wish to put together the tool and stand separately, you will find the same technology, including accessories, in the T 25 digital Solution. For smaller tasks involving temperature measurement, the T 25 mini control ULTRA-TURRAX is the more compact alternative; for a housing design that is easier to clean, the T 25 easy clean digital is the choice. If the volume range of up to 2 litres is no longer sufficient for larger batches, the T 50 digital ULTRA-TURRAX handles volumes of up to 30 litres.
Technical details
| Motor power input / output | 800 W / 500 W |
|---|---|
| Processing volume (H₂O) | 0.001 to 2 l |
| Max. viscosity | 5,000 mPas |
| Speed range | 3,000 to 25,000 rpm, continuously variable (1 % deviation) |
| Speed display | LED |
| Noise level (without tools) | 75 dB(A) |
| Support arm diameter / support arm length | 13 mm / 160 mm |
| Process type | batch |
| Permissible duty cycle | 100 % |
| Permissible ambient temperature range / humidity | 5 to 40 °C / 80 % (up to 31 °C), decreasing linearly to 50 % at 40 °C |
| IP rating | IP 20 in accordance with DIN EN 60529 |
| Connected load | 220 to 240 V, 50/60 Hz, 800 W (additional voltage variant 100 to 120 V available) |
| Dimensions (W x H x D) | 87 x 271 x 106 mm |
| Weight | 2.5 kg |
Scope of delivery
- T 25 digital ULTRA-TURRAX drive unit
A dispersing tool is not included and must be selected separately to suit the specific application.
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our Environment and Disposal page.
Warranty and procurement service
The T 25 digital is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Our procurement service puts together dispersing tools, stands and other accessories to suit your existing drive; on request, it can also provide factory calibration certificates and qualification documents for regulated areas.
| Display type: | Digital |
|---|---|
| Max. speed: | 25,000 rpm |
| Power supply: | Mains operation |
| Supply form: | Single unit |
| Volume range: | 1 ml - 2000 ml |
Matching accessories
Content: 12 piece(s) (€25.13 / 1 piece(s))
Content: 12 piece(s) (€25.13 / 1 piece(s))