IKA S 25 KD - 18 G ST Dispersing tool, Ø 18 mm, for T 25, 0020002973
€1,407.00
% Manufacturer's RRP: €1,876.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 KD - 18 G ST Dispersing tool, Ø 18 mm, for T 25, 0020002973"
The S 25 KD - 18 G ST (0020002973) is the KD tool with a stator diameter of 18 mm. It works with batches of 10 to 1,500 ml, has a gap width of just 0.25 mm and is FDA-compliant according to the manufacturer. The shaft is mounted in a ball bearing with a PTFE seal and an FFKM O-ring; the tool can be operated under vacuum.
Narrow gap, small rotor surface area
The rotor has a diameter of 13.4 mm. At 25,000 rpm, the maximum permitted speed, the circumferential speed reaches 17.5 m/s. The final fineness ranges from 10 to 50 µm for suspensions and from 1 to 10 µm for emulsions. The immersion depth is 40 to 165 mm, and the installation length is 194 mm.
Material, vacuum and temperature
AISI 316L, PTFE and FFKM come into contact with the medium. The tool is suitable for solvents and operates within a pH range of 2 to 13. A vacuum of 100 mbar is permitted; the maximum operating temperature is 150 °C. It can be sterilised using all methods except hot air; the ball bearing is excluded from this.
With and without ST
The tool is compatible with all four drives in the T-25 series specified by IKA: T 25 digital, T 25 easy clean digital and control, and T 25 mini control. The version without the ST designation is called the S 25 KD - 18 G; the S 25 N - 18 G has the same stator diameter but is made from PTFE and AISI 316L and is rated up to 180 °C. If you require a 25 mm stator, you will find it in the S 25 KD - 25 G ST.
Typical applications
- Dispersing and emulsifying from 10 to 1,500 ml
- Working under vacuum
- Solutions containing solvents in the pH range 2 to 13
- Applications where FDA compliance of the equipment is required
Technical details
| Working range (H2O) | 0.01 to 1.5 l |
|---|---|
| Stator diameter | 18 mm |
| Rotor diameter | 13.4 mm |
| Stator/rotor gap width | 0.25 mm |
| Max. permissible speed | 25,000 rpm |
| Maximum circumferential speed | 17.5 m/s |
| Immersion depth | 40 to 165 mm |
| Installation length | 194 mm |
| Bearing and seal | Ball bearing with PTFE seal and FFKM O-ring |
| Materials in contact with the product | AISI 316L, PTFE, FFKM |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 150 °C |
| Sterilisability | All methods except hot air |
| Vacuum | 100 mbar |
| Final particle size of suspensions | 10 to 50 µm |
| Final particle size of emulsions | 1 to 10 µm |
| FDA compliance (according to the manufacturer) | Yes |
| Weight | 0.3785 kg |
Scope of delivery
- 1 x IKA S 25 KD - 18 G ST dispersing tool (single tool)
The drive unit is not included in the scope of delivery.
Individual requirements and procurement service
Would you like the tool supplied together with the matching drive, a second tool for changing, or assistance in choosing the correct geometry? We will put together the right combination for your application via our procurement service.