Skip to main content Skip to search Skip to main navigation

IKA S 25 KD - 25 G ST Dispersing tool, Ø 25 mm, for T 25, 0020002974

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 25 KD - 25 G ST Dispersing tool, Ø 25 mm, for T 25, 0020002974"

The S 25 KD - 25 G ST (0020002974) has an installation length of 194 mm and weighs 0.4 kg. The stator measures 25 mm, the rotor 20 mm and the gap 0.5 mm. This enables the tool to achieve a circumferential speed of up to 26.2 m/s at 25,000 rpm and process volumes of 50 to 2,000 ml.

Comminution figures

The final particle size is between 15 and 50 µm for suspensions and between 1 and 10 µm for emulsions. The immersion depth ranges from 40 to 165 mm. The stator, rotor and gap (25 mm, 20 mm, 0.5 mm) correspond to the S 25 N - 25 G - ST; the bearings, materials and temperature limits differ.

Ball bearing instead of PTFE split ring

Here, the shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. This enables operation under vacuum (specified at 100 mbar); the maximum operating temperature is 150 °C. Materials in contact with the product are AISI 316L, PTFE and FFKM; the pH range is 2 to 13, and solvents are permitted. The tool can be sterilised using all methods except hot air, with the exception of the ball bearing. IKA also states FDA compliance.

Drives and variants

Suitable models include the T 25 digital, as well as the T 25 easy clean digital and control. Without the ‘ST’ designation, the S 25 KD - 25 G is available with a 17 mm rotor and a circumferential speed of up to 22.2 m/s. Those working with an 18 mm stator should opt for the S 25 KD - 18 G ST.

Typical applications

  • Dispersing and emulsifying volumes from 50 to 2,000 ml
  • Work under vacuum
  • Solvent-based processes
  • Applications requiring FDA compliance of the tool

Technical details

Working range (H2O)0.05 to 2 l
Stator diameter25 mm
Rotor diameter20 mm
Stator/rotor gap width0.5 mm
Maximum permissible speed25,000 rpm
Maximum circumferential speed26.2 m/s
Immersion depth40 to 165 mm
Installation length194 mm
Bearing and sealBall bearing with PTFE seal and FFKM O-ring
Materials in contact with the productAISI 316L, PTFE, FFKM
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
SterilisabilityAll methods except hot air
Vacuum100 mbar
Final particle size of suspensions15 to 50 µm
Final particle size of emulsions1 to 10 µm
FDA compliance (according to the manufacturer)Yes
Weight0.4 kg

Scope of delivery

  • 1 x IKA S 25 KD - 25 G ST dispersing tool (single tool)

The drive unit is not included in the scope of delivery.

Individual requirements and procurement service

Would you like the tool supplied together with the matching drive, a second tool for changing, or assistance in choosing the correct geometry? Through our procurement service, we will put together the right combination for your application.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 25 digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0003725000, Produktansicht
IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000
Manufacturer number: 0003725000
Sale price: €2,010.00
RRP €2,680.00 25% below manufacturer's RRP
Discount In stock
IKA T 25 easy clean digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0025002560, Produktansicht
IKA T 25 easy clean digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0025002560
Manufacturer number: 0025002560
Sale price: €1,972.50
RRP €2,630.00 25% below manufacturer's RRP