Skip to main content Skip to search Skip to main navigation

IKA S 25 KD - 25 G Dispersing tool, Ø 25 mm, ball bearing, for T 25, 0020002972

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 25 KD - 25 G Dispersing tool, Ø 25 mm, ball bearing, for T 25, 0020002972"

The IKA S 25 KD - 25 G has a working range of up to two litres. It has a stator diameter of 25 millimetres, a rotor diameter of 17 millimetres and a gap of 0.5 millimetres, and can operate with volumes as low as 50 millilitres.

Ball bearings and vacuum

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. This makes the unit suitable for vacuum conditions down to 100 mbar. The operating temperature may reach up to 150 °C; the pH range is from 2 to 13, and solvents are permitted.

Dimensions and performance data

The tool has an immersion depth of 40 to 165 millimetres and is 194 millimetres long. At 25,000 rpm, the rotor reaches a circumferential speed of 22.2 metres per second. IKA specifies a final particle size of 15 to 50 micrometres for suspensions and 1 to 10 micrometres for emulsions. Materials in contact with the product include AISI 316L, PTFE and FFKM; the tool is FDA-compliant according to the manufacturer and weighs 351 grams.

Drives

The S 25 KD - 25 G is designed for use with the T 25 digital, T 25 easy clean digital and T 25 easy clean control. It may be sterilised using any method except hot air.

Typical applications

  • Dispersing and emulsifying in volumes from 50 ml to 2 l
  • Vacuum work down to 100 mbar
  • Emulsions with a final particle size of 1 to 10 µm
  • Media containing solvents in the pH range 2 to 13
  • Applications requiring FDA-compliant tooling materials

Technical details

Stator diameter25 mm
Rotor diameter17 mm
Stator/rotor gap width0.5 mm
Processable volume (H2O)0.05 to 2 l
Recommended working range50 to 2,000 ml
Maximum permissible speed25,000 rpm
Maximum circumferential speed22.2 m/s
Immersion depth40 to 165 mm
Installation length194 mm
Bearing type and sealBall bearing with PTFE seal and FFKM O-ring
Material in contact with the productAISI 316L, PTFE, FFKM
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
Vacuum100 mbar
Sterilisabilityall methods except hot air
Final particle size of suspensions15 to 50 µm
Final particle size of emulsions1 to 10 µm
FDA compliance (according to the manufacturer)Yes
Weight0.3509 kg

Scope of delivery

  • 1 x IKA S 25 KD - 25 G dispersing tool (single tool)
  • The drive is not included in the scope of delivery.

Related tools

The smaller version with ball bearings is the S 25 KD - 18 G, suitable for 10 to 1,500 millilitres. The S 25 KD - 25 G ST is available as an ST version with a 20-millimetre rotor diameter. If you require a vacuum down to 1 mbar and a mechanical seal, take a look at the S 25 KV - 25 G.

Selection guide: a comparison

ToolStator / RotorOperating range (H2O)
S 25 KD - 25 G (this product)25 / 17 mm0.05 to 2 l
S 25 KD - 18 G18 / 12.7 mm0.01 to 1.5 l
S 25 KD - 25 G ST25 / 20 mm0.05 to 2 l
S 25 KV - 25 G25 / 17 mm0.05 to 2 l

Individual requirements and procurement service

We can source drives, stands and other tools from the S-25 series on request. The procurement service can assist with selection.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 25 digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0003725000, Produktansicht
IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000
Manufacturer number: 0003725000
Sale price: €2,010.00
RRP €2,680.00 25% below manufacturer's RRP
Discount In stock
IKA T 25 easy clean digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0025002560, Produktansicht
IKA T 25 easy clean digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0025002560
Manufacturer number: 0025002560
Sale price: €1,972.50
RRP €2,630.00 25% below manufacturer's RRP