IKA S 25 D - 14 G - KS disposable dispersing tool (12 pieces), plastic, Ø 14 mm, 0003452100
€301.50
% Manufacturer's RRP: €335.00 10% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 D - 14 G - KS disposable dispersing tool (12 pieces), plastic, Ø 14 mm, 0003452100"
For medium and large volumes: the IKA S 25 D - 14 G - KS disposable dispersing tool
In modern laboratory analysis, medical and clinical diagnostics, and forensic evidence collection, sample preparation forms the critical foundation for all subsequent investigations. When pulverising animal and plant tissue samples, homogenising viscous cell cultures or processing infectious environmental materials using a high-performance disperser from the renowned IKA T 25 series, enormous mechanical shear forces are at work. These physical forces inevitably force microscopically small, often invisible components of the sample deep into the mechanical gaps and internal plain bearings of the tool being used. Unless a conventional reusable stainless-steel tool is painstakingly dismantled, chemically cleaned, brushed and then sterilised in an autoclave after every single sample, there is a risk of cross-contamination (known as ‘carry-over’), which is dreaded by laboratory technicians. To reduce this time-consuming problem in your day-to-day laboratory routine, IKA has developed the S 25 D - 14 G - KS single-use dispersing tool (MPN 0003452100). Supplied in a cost-effective and practical pack of 12, this tool, made from plastic, offers size reduction with a lower risk of sample carry-over.
Cross-contamination in sensitive processes
The concept behind the ‘KS’ (plastic) series is based on the strict single-use principle. In highly sensitive fields such as PCR (polymerase chain reaction) analysis, preparation for next-generation sequencing (NGS) or toxicological investigations in forensic medicine, even a single, invisibly carried-over DNA molecule or a minuscule trace of an active substance from a previous sample can lead to so-called false-positive results. Such misinterpretations can render a series of experiments unusable. By using the IKA S 25 D - 14 G - KS, you reduce this analytical risk. For every new patient or environmental sample, you remove a fresh, unused and hygienically impeccable tool directly from its packaging. After the dispersion process, the plastic tool is simply disposed of properly as clinical waste, together with any potentially infectious or contaminated residual sample. The cleaning and sterilisation cycle required for conventional stainless steel tools is no longer needed.
The 14-millimetre stator: medium to large volumes
In direct comparison with the smaller 10 mm instruments, this S 25 D - 14 G - KS model stands out due to its significantly larger stator diameter of 14 millimetres (indicated by the ‘14’ in the product designation). This larger size greatly expands the tool’s efficient working range: you can homogenise sample volumes from 10 millilitres up to a substantial 500 millilitres (based on the viscosity of water) effortlessly, quickly and reproducibly. The additional suffix ‘G’ denotes a coarse slot geometry on the stator. This open, high-throughput geometry is important when dealing with coarse-grained, tough or fibrous feedstocks. Sturdy plant roots, tough muscle tissue, tough cartilage, coated pharmaceutical tablets or compact food samples are drawn deep into the shear gap by the powerful axial suction forces of the 14-mm rotor. There, at speeds of up to 24,000 revolutions per minute, they are cut into their finest components by the sharp plastic edges.
Cost-effectiveness and Total Cost of Ownership (TCO) in the modern laboratory
At first, cursory glance, the ongoing purchase of single-use tools is very often regarded as an additional and unnecessary cost factor. However, a detailed full-cost analysis (Total Cost of Ownership) in real-world laboratory practice can show the opposite. The purchase cost of a single IKA S 25 D disposable tool can be lower than the cumulative cost of the expensive working time a highly qualified laboratory technician spends daily at the sink dismantling, laboriously brushing and reassembling conventional stainless steel tools. Added to this are the substantial, often hidden savings on expensive, aggressive cleaning chemicals, the high energy and water consumption of the autoclave, and the inevitable and costly wear and tear on PTFE slide bearings and seals in stainless steel models. Through the consistent use of single-use technology, analytical laboratories can increase their sample throughput. Staff are relieved of cleaning tasks.
System integration (aerosol protection)
The IKA S 25 D - 14 G - KS is designed as an original accessory for the IKA T 25 dispersing drives. It can be coupled to the T 25 digital, the T 25 easy clean digital and the T 25 easy clean control. Another advantage of this system, which is relevant for occupational health and safety, is its compatibility with IKA disposable tubes (such as the S 18/25-ET50 tube). Simply attaching this protective tube to the tool shank creates a fully self-contained system. When dispersing infectious bacterial cultures, highly toxic chemicals or extremely foul-smelling environmental samples at maximum speed, fewer dangerous splashes or aerosols are intended to escape into the laboratory environment or the fume hood. This supports the protection of staff and laboratory instruments in the immediate vicinity.
Technical data
- Product type: Disposable dispersing tool (rotor-stator principle)
- Packaging unit (PU): 12 pieces per box
- Material: High-quality, dimensionally stable and chemical-resistant plastic (PC/polymer blend)
- Stator diameter: 14 mm
- Rotor diameter: approx. 10.3 mm
- Working range (H₂O volume): 10 to 500 ml
- Slot geometry: Coarse (G) for extremely high material throughput with solid/tough samples
- Maximum permissible speed: up to 24,000 rpm (depending on the T 25 drive used)
- Immersion depth: 15 to 85 mm
- Maximum permissible operating temperature: 100 °C
- Compatible drives: IKA T 25 digital, T 25 easy clean digital, T 25 easy clean control
- Sterilisable: No (Purely a single-use item to strictly prevent contamination)
Scope of delivery
-
1 x pack containing 12 IKA S 25 D - 14 G - KS disposable plastic dispersing tools
(Important note: The essential IKA T 25 drive motor, as well as any sample vessels or ET50 protective tubes that may be required, are available separately and are expressly not included in this scope of delivery.)
Individual requirements & accessories
Also available is the IKA S 18/25-ET50 disposable tube, which fits onto the shaft of this 14 mm tool and acts as a splash guard. Do you need to process very small sample volumes (under 100 ml) with high precision? In that case, simply switch to the smaller version, the S 25 D - 10 G - KS (with a 10 mm stator), for these applications. Our experienced procurement service will be happy to advise you on selecting suitable tool sizes and establishing optimal Standard Operating Procedures (SOPs) for your contamination-free sample preparation.