IKA S 25 KV - 2802 dissolver stirring shaft, high speed, stator Ø 39 mm, for T 25, 0020008825
€1,885.50
% Manufacturer's RRP: €2,514.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 KV - 2802 dissolver stirring shaft, high speed, stator Ø 39 mm, for T 25, 0020008825"
The S 25 KV - 2802 (0020008825) dissolver stirring shaft has a rotor with a diameter of 30 mm and achieves a peripheral speed of 39.3 m/s at 25,000 rpm. IKA describes it as a high-speed stirrer for intensive mixing and the breaking up of agglomerates. It is suitable for volumes of 0.1 to 2 l and is compatible with T-25 drives.
Mechanical seal and materials
The shaft is mounted in a ball bearing with a mechanical seal. The counter ring and seal ring are made of SiC, whilst the O-rings are made of Kalrez. Materials in contact with the product are FFPM, SiC, AISI 316L and AISI 302; the unit is FDA-compliant according to the manufacturer. It may be used under vacuum down to 1 mbar and at pressures up to 6 bar.
Operating limits
The pH range is from 2 to 13; solvents are permitted. Temperatures of up to 220 °C are permitted for short periods; sterilisation may be carried out using any method. The immersion depth is 40 to 225 mm, the installation length is 270 mm, and the weight is 0.56 kg.
Typical applications
- Intensive mixing in high-speed stirrer operation for batches of 0.1 to 2 l
- Breaking up agglomerates
- Operations under vacuum down to 1 mbar or pressure up to 6 bar
- Batches containing solvents in the pH range 2 to 13
- Processes involving short-term temperatures of up to 220 °C
- Batches where the tool is sterilised between runs
Technical details
| Processable volume (H2O) | 0.1 to 2 l |
|---|---|
| Stator diameter | 39 mm |
| Rotor diameter | 30 mm |
| Max. permissible speed | 25,000 rpm |
| Max. peripheral speed | 39.3 m/s |
| Immersion depth | 40 to 225 mm |
| Installation length | 270 mm |
| Bearings and seals | Ball bearing, mechanical seal (SiC, Kalrez O-rings) |
| Materials in contact with the product | FFPM, SiC, AISI 316L, AISI 302 |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 220 °C (for short periods) |
| Sterilisability | all methods |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| FDA compliance (according to the manufacturer) | Yes |
| Weight | 0.56 kg |
Scope of delivery
- 1 x IKA S 25 KV - 2802 dissolver stirring shaft (single tool)
- The drive unit (T 25 easy clean digital, T 25 easy clean control, T 25 digital or T 25 mini control) is not included in the scope of delivery.
Position within the KV-25 series
The S 25 KV - 25 F has the same installation length of 270 mm and the same immersion depth of 40 to 225 mm, but only an 18 mm rotor diameter and a peripheral speed of 23.6 m/s. It specifies a final fineness of 5 to 25 µm for suspensions. The S 25 KV - 25 G has a 17 mm rotor and 22.2 m/s (0.05 to 2 l, 15 to 50 µm for suspensions). All three tools feature a SiC mechanical seal, can operate under vacuum down to 1 mbar and under pressure up to 6 bar, and are constructed from FFPM, SiC, AISI 316L and AISI 302. Differences lie in the design (dissolver stirring shaft versus dispersing tool) and in the diameters of the stator and rotor.
Individual requirements & procurement service
We can source the appropriate T-25 drives and other tools on request. Through the procurement service, the selection can be tailored to your specific application.