IKA S 25 D - 10 G - KS disposable dispersing tool (12 pieces), plastic, Ø 10 mm, 0003452200
€301.50
% Manufacturer's RRP: €335.00 10% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 D - 10 G - KS disposable dispersing tool (12 pieces), plastic, Ø 10 mm, 0003452200"
The IKA S 25 D - 10 G - KS disposable dispersing tool
In highly specialised analytical laboratories, medical diagnostics, forensic evidence collection and modern biotechnological research, the quality of sample preparation is an important foundation for reliable results. When grinding and homogenising tissue samples, cell cultures or infectious materials using a high-performance disperser from the IKA T 25 series, enormous mechanical shear forces are at work. These forces inevitably force microscopically small components of the sample deep into the mechanical gaps and plain bearings of the tool being used. Unless a conventional stainless-steel tool is laboriously dismantled, chemically cleaned and sterilised in an autoclave after every single sample, there is a risk of the dreaded cross-contamination (carry-over). It is precisely to address this critical, time-consuming and error-prone issue that IKA has developed the S 25 D - 10 G - KS disposable dispersing tool (MPN 0003452200). Supplied in a cost-effective pack of 12, this tool is made from plastic and, as a disposable item, reduces the risk of sample carry-over.
Reduced cross-contamination risk in highly sensitive processes
The fundamental concept behind the “KS” (plastic) series is the single-use principle. In fields such as PCR (polymerase chain reaction) analysis, next-generation sequencing (NGS) or toxicological testing, even a single carried-over DNA molecule or a tiny trace of an active substance from a previous sample can lead to false-positive results. Such misinterpretations can render a series of experiments unusable. With the IKA S 25 D - 10 G - KS, you can reduce this risk. For each new patient or environmental sample, you remove a brand-new, unused tool from its packaging. After the dispersion process, the plastic tool is simply disposed of properly, together with the potentially contaminated residual sample. The cleaning and sterilisation effort required for conventional stainless steel tools is eliminated.
Technological precision: 10 mm stator and coarse (G) geometry
Despite being designed as a single-use item, this tool is in no way inferior to its steel counterparts in terms of homogenisation efficiency. It operates on the highly effective rotor-stator principle. The stator has a precisely dimensioned diameter of 10 millimetres (hence the ‘10’ in the product name). This compact size defines the optimal working range: the tool is precisely designed for the rapid homogenisation of small to medium sample volumes in the range of 10 to 100 millilitres (based on the viscosity of water). The abbreviation ‘G’ stands for a coarse slot geometry on the stator. This open, high-throughput design is of fundamental importance when you need to process coarse-grained, tough or highly fibrous raw materials. Plant roots, muscle tissue, cartilage or compact pharmaceutical tablets are drawn deep into the shear gap by the rotor’s powerful axial suction forces and shattered there into their finest components at speeds of up to 24,000 revolutions per minute.
Cost-effectiveness and Total Cost of Ownership (TCO) in the laboratory
At first glance, the ongoing purchase of disposable tools is often regarded as an additional cost factor. However, a detailed total cost of ownership (TCO) analysis in day-to-day laboratory practice can show a different result. The purchase cost of an IKA S 25 D single-use tool can be lower than the cumulative cost of the working time a highly qualified laboratory technician spends each day at the sink dismantling and brushing stainless steel tools. Savings are possible on cleaning chemicals, on the energy consumption of the autoclave, and on the wear of PTFE plain bearings and seals in conventional tools. By using single-use technology, sample throughput can increase. Staff are freed from tedious cleaning tasks and can once again concentrate on the actual, value-adding scientific analysis.
System integration for maximum occupational safety (splash protection)
The S 25 D - 10 G - KS is designed as a precisely fitting original accessory exclusively for the IKA T 25 dispersion drives (compatible with T 25 digital, T 25 easy clean digital and T 25 easy clean control). Another advantage of this system, which is important for occupational health and safety, is its compatibility with IKA disposable tubes (e.g. the ET50 tube). Fitting this protective tube onto the tool shaft creates a completely sealed system. When dispersing infectious bacterial cultures, toxic chemicals or foul-smelling environmental samples, no dangerous splashes or invisible aerosols can escape into the laboratory environment or the fume hood. You therefore not only protect yourself and your staff from dangerous pathogens, but also prevent external contamination of your valuable laboratory instruments. The S 25 D - 10 G - KS is suitable for laboratories that value safety, efficiency and sample purity.
Technical data
- Product type: Disposable dispersing tool (rotor-stator)
- Packaging unit (PU): 12 pieces per pack
- Material: Plastic
- Stator diameter: 10 mm
- Rotor diameter: approx. 6.8 mm
- Working range (H₂O volume): 10 to 100 ml
- Slot geometry: Coarse (G) for high throughput with viscous samples
- Gap between rotor and stator: 0.2 mm
- Maximum permissible speed: up to 24,000 rpm (depending on the drive used)
- Immersion depth: 15 to 85 mm
- Compatible drives: IKA T 25 digital, T 25 easy clean digital, T 25 easy clean control
- Sterilisable: No (purely a single-use item to prevent contamination)
Scope of delivery
-
1 x pack containing 12 IKA S 25 D - 10 G - KS single-use plastic dispersing tools
(Important note: The required T 25 drive motor, as well as any sample vessels or protective tubes that may be needed, are available separately and are not included in this delivery.)
Individual requirements & accessories
To realise the full potential of this tool in terms of health and safety, we strongly recommend using it in combination with the IKA S 18/25-ET50 disposable tube, which fits seamlessly onto the shaft and acts as an aerosol barrier. Do you need to process significantly larger sample volumes (up to 500 ml)? Then simply switch to the larger version, the S 25 D - 14 G - KS (with a 14 mm stator). Our procurement service will be happy to advise you on selecting suitable tool sizes and establishing SOPs for your sample preparation.