Skip to main content Skip to search Skip to main navigation

IKA S 25 KD - 25 F Dispersing Tool, Ø 25 mm, Ball Bearings, for T 25, 0020002975

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 25 KD - 25 F Dispersing Tool, Ø 25 mm, Ball Bearings, for T 25, 0020002975"

With an installation length of 194 mm and an immersion depth of 40 to 165 mm, the S 25 KD - 25 F (0020002975) is shorter than the S-25 tools in the KV (270 mm) and KD - LR (267 mm) series. It has a 25 mm stator, an 18 mm rotor and a 0.5 mm gap; it processes 0.1 to 2 l and specifies a final fineness of 5 to 25 µm for suspensions.

Ball bearing, PTFE seal and materials

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. Materials in contact with the product are AISI 316L, PTFE and FFKM; the tool is FDA-compliant according to the manufacturer. The pH range is from 2 to 13; solvents are permitted. Operation under vacuum is permitted down to 100 mbar. The maximum operating temperature is 150 °C; sterilisation is permitted using all methods except hot air.

Speed and dimensions

At 25,000 rpm, the rotor reaches a peripheral speed of 23.6 m/s. The final particle size for emulsions is between 1 and 5 µm. Batch sizes of 100 to 2,000 ml are recommended. The tool weighs 0.404 kg.

Typical applications

  • Dispersing and emulsifying volumes of 0.1 to 2 l
  • Suspensions with final particle sizes of 5 to 25 µm
  • Emulsions with final particle sizes of 1 to 5 µm
  • Operations under vacuum down to 100 mbar
  • Processes using solvents in the pH range 2 to 13

Technical details

Processable volume (H2O)0.1 to 2 l
Stator diameter25 mm
Rotor diameter18 mm
Stator/rotor gap width0.5 mm
Max. permissible speed25,000 rpm
Maximum circumferential speed23.6 m/s
Immersion depth40 to 165 mm
Installation length194 mm
Bearing and sealBall bearing, PTFE seal, FFKM O-ring
Materials in contact with the productAISI 316L, PTFE, FFKM
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
SterilisabilityAll methods except hot air
Vacuum100 mbar
Final particle size of suspensions5 to 25 µm
Final particle size of emulsions1 to 5 µm
FDA compliance (according to the manufacturer)Yes
Weight0.404 kg

Scope of delivery

  • 1 x IKA S 25 KD - 25 F dispersing tool (single tool)
  • The drive unit (T 25 easy clean digital, T 25 easy clean control or T 25 digital) is not included in the Scope of delivery.

Longer versions with the same rotor

The same geometry (25 mm stator, 18 mm rotor, 0.5 mm gap) and the same final fineness values are found in the S 25 KD - LR - 25 F with an installation length of 267 mm for IKA laboratory reactors and in the S 25 KV - 25 F with a mechanical seal, an installation length of 270 mm, vacuum down to 1 mbar and up to 220 °C. The S 25 KD - 25 G operates with a 17 mm rotor and a capacity of 0.05 to 2 l.

Individual requirements and procurement service

We can supply the appropriate T-25 drives and a second tool for changing them on request. The procurement service will clarify the geometry with you.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 25 digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0003725000, Produktansicht
IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000
Manufacturer number: 0003725000
Sale price: €2,010.00
RRP €2,680.00 25% below manufacturer's RRP
Discount In stock
IKA T 25 easy clean digital ULTRA-TURRAX Dispergierer, 1 bis 2.000 ml, 3.000 bis 25.000 rpm, 0025002560, Produktansicht
IKA T 25 easy clean digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0025002560
Manufacturer number: 0025002560
Sale price: €1,972.50
RRP €2,630.00 25% below manufacturer's RRP