IKA S 25 N - 10 G Dispersing Tool, Ø 10 mm, for T 25, 0000594000
€1,042.50
% Manufacturer's RRP: €1,390.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 25 N - 10 G Dispersing Tool, Ø 10 mm, for T 25, 0000594000"
With a stator diameter of 10 millimetres and a rotor diameter of 7.5 millimetres, the IKA S 25 N - 10 G is designed for small batches. It operates with volumes ranging from 1 to 100 millilitres, has a minimum immersion depth of 22 millimetres and has an installed length of 105 millimetres. It weighs 152 grams.
Geometry and final fineness
There is a gap of 0.35 millimetres between the rotor and the stator. At the maximum permissible speed of 25,000 rpm, the rotor reaches a circumferential speed of 9.8 metres per second. IKA specifies the final fineness as 10 to 50 micrometres for suspensions and 1 to 10 micrometres for emulsions. The shaft runs in a PTFE split-ring bearing.
Material and resistance
The product comes into contact with PTFE and AISI 316L stainless steel. The unit is compatible with solvents and abrasive substances, and the pH range is from 2 to 13. Operating temperatures of up to 180 °C are permissible for short periods, and sterilisation may be carried out using any method.
Compatible drives
The tool is compatible with the T 25 digital, T 25 easy clean digital, T 25 easy clean control and T 25 mini control drives. It is also compatible with the Solution Sets featuring the T 25 digital, T 25 easy clean digital and T 25 easy clean control.
Typical applications
- Dispersing and emulsifying very small volumes between 1 and 100 ml
- Suspensions with a final particle size of 10 to 50 µm
- Emulsions with a final particle size of 1 to 10 µm
- Samples containing solvents or within a pH range of 2 to 13
- Samples containing abrasive components, where the equipment is subsequently sterilised
Technical details
| Stator diameter | 10 mm |
|---|---|
| Rotor diameter | 7.5 mm |
| Stator/rotor gap width | 0.35 mm |
| Processable volume (H2O) | 0.001 to 0.1 l |
| Maximum permissible speed | 25,000 rpm |
| Maximum peripheral speed | 9.8 m/s |
| Immersion depth | 22 to 85 mm |
| Installation length | 105 mm |
| Material in contact with the product | PTFE, AISI 316L |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Suitable for abrasive substances | Yes |
| Max. operating temperature (short-term) | 180 °C |
| Sterilisability | all methods |
| Final particle size of suspensions | 10 to 50 µm |
| Final particle size (emulsions) | 1 to 10 µm |
| Weight | 0.152 kg |
Scope of delivery
- 1 x IKA S 25 N - 10 G dispersing tool (single tool)
- The drive is not included in the scope of delivery.
For larger batches
The S 25 N - 18 G, with a stator diameter of 18 millimetres, is designed for volumes up to 1.5 l, whilst the S 25 N - 25 G - ST, with a stator diameter of 25 millimetres, is designed for volumes from 0.05 to 2 l. For those working with volumes below 50 millilitres, the S 10 N - 8 G ST is a tool for T-10 drives.
Selection guide: a comparison
| Tool | Stator / Rotor | Operating range (H2O) |
|---|---|---|
| S 25 N - 10 G (this product) | 10 / 7.5 mm | 0.001 to 0.1 l |
| S 25 N - 18 G | 18 / 12.7 mm | 0.010 to 1.5 l |
| S 25 N - 25 G - ST | 25 / 20 mm | 0.05 to 2 l |
| S 10 N - 8 G ST | 8 / 6.1 mm | 0.001 to 0.05 l |
Individual requirements and procurement service
We can supply further tools from the S-25 series and the appropriate drives on request. If you are unsure which size is suitable for your vessel and sample volume, our procurement service will help you with the selection.