IKA ICC 150 lite Immersion Circulator, LED Display, up to 150 °C, 0020105581
€741.75
% Manufacturer's RRP: €989.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA ICC 150 lite Immersion Circulator, LED Display, up to 150 °C, 0020105581"
The ICC 150 lite belongs to the lite series of IKA immersion circulators, which is designed for the essential basic functions. It controls the temperature of liquids from room temperature to 150 °C with 2,000 W heating power, has a built-in pressure/suction pump and is classified for flammable liquids according to DIN 12876 class III. The housing is made of coated stainless steel.
Overflow protection and safety circuit
The circulator detects an overflow of the bath, for example due to an unintentionally increased amount of oil, and safely switches off the heating. It also monitors for low level. The safety circuit is adjustable from 0 to 160 °C, and warnings are visual and audible. A PT1000 measures both the working and the safety temperature.
Display and control
The LED display shows working and safety temperature with a resolution of 0.1 K, and the set temperature can be set to an accuracy of 0.1 K. Control is by PID, and the temperature stability according to DIN 12876 is ±0.05 K. With external cooling the minimum operating temperature of the circulator is -25 °C.
Pump
The integrated pressure/suction pump is intended for internal and external applications. It delivers up to 15 l/min at 0 bar back pressure and reaches a maximum pump pressure of 0.3 bar, on the suction side 0.1 bar.
Dimensions, clamp and connection
The circulator measures 135 x 303 x 180 mm and weighs 4.7 kg. It is attached to the bath vessel with a clamp, the universal clamp has a clamping width of 0 to 40 mm, and the vessel must be at least 150 mm deep. A stand foot is integrated into the housing. The connection is to 230 V at 50/60 Hz, and the power consumption is 2,100 W. Via RS 232 and USB-B the device can be monitored, controlled and documented.
Comparison with the ICC basic
The ICC basic is somewhat larger at 145 x 340 x 200 mm and 3.75 kg, but lighter. Its temperature stability is ±0.02 K compared with ±0.05 K for the ICC 150 lite, and the pump flow rate is 18 instead of 15 l/min. Both devices have 2,000 W heating power, a safety circuit from 0 to 160 °C and an LED display.
As a package with stainless steel bath
The ICC 150 lite is also available in ready-to-connect packages with the necessary accessories. In the shop these are, for example, the ICC 150 lite pro 9 with a 9 litre stainless steel bath, the ICC 150 lite pro 12 with 12 litres and the ICC 150 lite pro 20 with 20 litres.
Typical applications
- Temperature control of liquids up to 150 °C in an existing bath vessel
- Use with flammable liquids according to DIN 12876 class III
- Applications with oil in which an overflow is to be detected and the heating switched off
- Internal or external applications with the integrated pump
- Monitoring and documentation on a PC via RS 232 or USB-B
Technical details
| Heating power | 2,000 W |
|---|---|
| Working temperature | Room temp. to 150 °C |
| Operating temperature min. (with external cooling) | -25 °C |
| Temperature control | PID |
| Working temperature probe | PT1000 |
| Safety temperature probe | PT1000 |
| Display of working/safety temperature | LED |
| Temperature stability according to DIN 12876 | ±0.05 K |
| Display resolution | 0.1 K |
| Setting accuracy of set temperature | 0.1 K |
| Pump type | Pressure/suction pump |
| Max. flow rate (0 bar back pressure) | 15 l/min |
| Max. pump pressure (no flow) | 0.3 bar |
| Max. pump pressure suction side (no flow) | 0.1 bar |
| Classification according to DIN 12876 | III with FL marking |
| Warning functions | visual, audible |
| Safety circuit, adjustable | 0 to 160 °C |
| Low/high level protection | yes |
| Min. bath depth | 150 mm |
| Device mounting | Clamp |
| Clamping width of universal clamp | 0 to 40 mm |
| Dimensions (W x H x D) | 135 x 303 x 180 mm |
| Weight | 4.7 kg |
| Permissible duty cycle | 100 % |
| Ambient temperature | 5 to 40 °C |
| Relative humidity | max. 80 % |
| IP rating (DIN EN 60529) | IP 21 |
| Interfaces | RS 232, USB-B |
| Power supply | 230 V, 50/60 Hz |
| Power consumption | 2,100 W |
Scope of delivery
- 1 x ICC 150 lite Immersion Circulator
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Warranty and procurement service
The IKA manufacturer's warranty of 2 years applies to the ICC 150 lite, extended to 3 years on registration at ika.com/register within 90 days of purchase. On request we procure bath vessels, packages with bath, cooling coils and further accessories.