Skip to main content Skip to search Skip to main navigation

IKA ICC basic Immersion Circulator, LED Display, up to 150 °C, 0004134400

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA ICC basic Immersion Circulator, LED Display, up to 150 °C, 0004134400"

The ICC basic is the immersion circulator with LED display and operation via push and rotary knobs. It controls the temperature of liquids in open or semi-open bath vessels up to 150 °C, has a heating power of 2,000 W and a temperature stability of ±0.02 K according to DIN 12876. A bath vessel is not included in the scope of delivery.

Display and control

Working and safety temperature appear on an LED display with 0.1 K resolution. The set temperature can be set to an accuracy of 0.1 K. Control is by PID, the working temperature is measured by a PT 100 and the safety temperature by a PT1000. The working temperature ranges from room temperature +10 K at 1,000 rpm to 150 °C, and with external cooling the minimum operating temperature is -20 °C.

Clamp, dimensions and weight

The universal clamp has a clamping width of 0 to 40 mm, and the holding clip is included. The bath vessel must be at least 150 mm deep. The circulator is 145 mm wide, 340 mm high and 200 mm deep and weighs 3.75 kg. A carrying handle and an integrated stand are present on the housing.

Built-in pump

The pressure/suction pump is intended for internal or external applications, and its output can be varied. The flow rate is up to 18 l/min at 0 bar back pressure, the maximum pump pressure is 0.3 bar, and on the suction side 0.2 bar. For temperature control below or near ambient temperature, a cooling coil is optionally provided.

Mains connection and operating conditions

The connection is to 230 V at 50/60 Hz, and the power consumption is 2,100 W. The degree of protection is IP 21, and ambient temperatures of 5 to 40 °C at no more than 80 % relative humidity are permissible. The permissible duty cycle is 100 %. A calibration option is available.

Protection in operation

The safety circuit is adjustable from 0 to 160 °C. The device warns visually and audibly, including in the event of over-temperature, and monitors low and high levels. According to DIN 12876 the circulator is classified as class III with the FL marking. Via RS 232 and Micro-USB the circulator can be controlled and monitored with the IKA labworldsoft software, and the device software can be updated online.

Basic or control, with or without bath

As a ready-to-connect system with a plastic bath of size S or L, the device is available as the ICC basic eco 8 c and as the ICC basic eco 18 c, both with cover, pump connection set and cooling coil included in the scope of delivery. The ICC control has a TFT display instead of an LED and a temperature stability of ±0.01 K.

Typical applications

  • Controlling the temperature of liquids in open or semi-open bath vessels up to 150 °C
  • Operating the pump for internal or external applications
  • Control and monitoring from a PC via RS 232 or Micro-USB

Technical details

Heating power of circulator2,000 W
Working temperature rangeRoom temp. +10 K at 1,000 rpm to 150 °C
Min. operating temperature with external cooling-20 °C
Control typePID
Internal temperature sensorsPT 100 (working temperature), PT1000 (safety temperature)
DisplayLED
Stability according to DIN 12876±0.02 K
Readable resolution0.1 K
Set temperature, setting accuracy0.1 K
PumpPressure/suction pump, output variable
Max. flow rate at 0 bar back pressure18 l/min
Max. pump pressure at 0 l flow rate0.3 bar
Max. suction pressure at 0 l flow rate0.2 bar
Class according to DIN 12876III with FL marking
Warning functionvisual, audible, over-temperature
Adjustable safety circuit0 to 160 °C
Low-level and high-level protectionyes
Calibration optionyes
Minimum bath depth150 mm
MountingClamp
Universal clamp, clamping width0 to 40 mm
Circulator (W x H x D)145 x 340 x 200 mm
Weight3.75 kg
Duty cycle100 %
Permissible ambient temperature5 to 40 °C
Permissible relative humiditymax. 80 %
Degree of protection according to DIN EN 60529IP 21
InterfacesRS 232, Micro-USB
Voltage, frequency230 V, 50/60 Hz
Power consumption2,100 W

Scope of delivery

  • 1 x ICC basic Compact Immersion Circulator
  • 1 x Holding clip
  • 1 x Screwdriver
  • 1 x USB cable USB A to Micro-B, 2 m

The bath vessel is not included in the scope of delivery.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Warranty and procurement service

The IKA manufacturer's warranty of 2 years applies to the ICC basic, extended to 3 years on registration at ika.com/register within 90 days of purchase. On request we procure cooling coils, bath vessels, covers and other accessories.

Certification marks: NRTL (TÜV SÜD, USA/Canada)