IKA S 10 D - 7 G - KS - 110 plastic dispersing tool, 24 pieces, 0020002075
€564.30
% Manufacturer's RRP: €627.00 10% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 10 D - 7 G - KS - 110 plastic dispersing tool, 24 pieces, 0020002075"
High-shear kinetics on an analytical micro-scale
In molecular biological sample preparation (such as RNA/DNA extraction) and cellular analysis, the physical disruption of soft tissue in the low millilitre range is the fundamental first step in the process. The IKA S 10 D - 7 G - KS - 110 dispersing tool (geometrically specified with a 7 mm stator diameter) is intended for the T 10 basic and T 10 standard drives. The fluid dynamics principle is based on high-speed rotor-stator technology. The liquid medium is drawn into the dispersing head axially and forced through the geometrically defined slots in the stator (G version) by the rotating inner shaft with extreme radial acceleration. The resulting shear forces and pressure fluctuations (cavitation) are used to disrupt tissue samples.
Shaft length and sample volume
The fluid dynamics of the dispersion depend on the geometry of the sample vessel. The S 10 D - 7 G - KS - 110 has a shaft length of 110 mm and a stator diameter of 7 mm. It is specified for a sample volume of 1 to 40 ml (based on H₂O).
Reducing molecular carry-over
During sample preparation, microscopic sample carry-over from one batch to the next can affect the analytical result. Conventional stainless-steel dispersing tools require intensive decontamination after each process step in order to remove nucleic acid fragments. IKA plastic tools (KS series) are supplied in packs of 24, so a fresh tool can be used for each critical sample. This reduces the risk of cross-contamination between serial measurement runs.
Materials
The KS tools are made of polycarbonate and polysulfone (thermoplastic polymers) and are used at speeds of up to 30,000 rpm.
Technical details
- Product type: Plastic dispersing tool (KS)
- Fluid dynamics principle: Rotor-stator (high-shear)
- Working volume (based on H₂O): 1 to 40 ml
- Stator diameter: 7 mm
- Shaft length: 110 mm
- Product-contact materials: polycarbonate (PC), polysulfone (PSU)
- Analytical focus: Prevention of cross-contamination (carry-over)
- Compatible drives: IKA T 10 basic / T 10 standard
- Hygiene and cleaning: autoclavable
- Packaging unit (PU): 24 pieces per set
Scope of delivery
-
24 x IKA S 10 D - 7 G - KS - 110 plastic dispersing tool
(Important note: The IKA T 10 dispersing drive, as well as stands and sample vessels, are not included in the scope of delivery!)
Individual requirements & accessories
The plastic dispersing tools of the KS series are intended by IKA for the IKA T 10 basic and T 10 standard drives. According to the datasheet, they can be autoclaved. Please contact our procurement service at any time regarding the strategic procurement of laboratory consumables.