Skip to main content Skip to search Skip to main navigation

IKA T 10 basic ULTRA-TURRAX disperser, 0.5 to 100 ml, up to 30,000 rpm, 0003737000

Scope of delivery: T 10 basic drive unit with R 200 clamp. The dispersing tool, case and stand shown in the illustrations are not included and are available separately.

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA T 10 basic ULTRA-TURRAX disperser, 0.5 to 100 ml, up to 30,000 rpm, 0003737000"

The IKA T 10 basic ULTRA-TURRAX is a hand-held disperser for small sample volumes of between 0.5 and 100 millilitres (H₂O). The unit is powered directly from the 230-volt mains supply, requires no battery and is ready for use immediately upon plugging it in. The speed is infinitely variable from 8,000 to 30,000 revolutions per minute, allowing it to process both low-viscosity aqueous samples and thicker emulsions up to 5,000 mPas.

Continuously variable speed via the scale display

On the T 10 basic, the speed is read from a scale on the housing; the battery-powered T 10 battery version displays it digitally. This is sufficient for a procedure where the same mark can always be selected, and operation remains simple. When plugged in, the unit draws 125 watts, 75 watts of which are delivered to the motor. A duty cycle of 10 minutes followed by a 5-minute pause protects the motor from overheating during longer series of samples.

Tool change without additional tools

The boom has a diameter of 8 millimetres and a length of 100 millimetres. The dispersion tool can be removed without any additional tools using the quick-release coupling. Stainless steel dispersion tools are dismantled and cleaned individually for this purpose, whilst the disposable plastic tools, available in two sizes, come ready-assembled from the packaging and are disposed of after use. This reduces the cleaning effort required between two samples and prevents cross-contamination, for example in PCR analysis. No dispersing tool is included in the scope of delivery; it is selected separately to suit the application.

Compact and lightweight for manual operation

Measuring 178 millimetres in length, 56 in width and 66 in depth, the T 10 basic fits comfortably in the hand. Weighing 0.61 kilograms, the device can be held for extended periods without causing fatigue; the noise level without an attachment fitted is 65 dB(A).

For different mains voltages

In addition to the standard 230-volt version, IKA also supplies the same unit in 115-volt and 100-volt versions, for countries outside the European mains supply or for branch sites with different mains voltages. The IP 30 protection rating in accordance with DIN EN 60529 and a permissible operating range of between 5 and 40 °C at up to 80 % relative humidity are sufficient for normal day-to-day laboratory use, although the unit is not designed for use outdoors or in damp rooms.

Typical applications

  • Homogenisation of small tissue samples prior to further extraction
  • Preparation and fine dispersion of emulsions and suspensions on a micro-scale
  • Sample preparation for PCR analysis using disposable plastic tools
  • Routine tasks in teaching and training where a robust instrument that does not require battery maintenance is required

Selection guide: basic or battery?

The T 10 basic runs exclusively on mains power and therefore always requires a power socket within reach. For those who wish to use the disperser in a safety cabinet or on the move without a cable, the T 10 battery ULTRA-TURRAX is the battery-powered variant of the same series, albeit with lower motor power and a lower viscosity limit of 200 mPas. For mobile use with suitable accessories, there are also three kits available, such as the T 10 battery Portable Solution or the T 10 battery Tissue Safe Solution with disposable tools for tissue samples.

Technical details

Motor power input / output125 W / 75 W
Processable volume (H₂O)0.5 to 100 ml
Max. viscosity5,000 mPas
Speed range8,000 to 30,000 rpm, continuously variable
Speed displayScale
Noise level without tools65 dB(A)
Boom diameter / boom length8 mm / 100 mm
Duty cycleON 10 min, OFF 5 min
Permissible ambient temperature / humidity5 to 40 °C / 80 %
Degree of protectionIP 30 in accordance with DIN EN 60529
Dimensions (W x H x D)56 x 178 x 66 mm
Weight0.61 kg
Connected load230 V, 50/60 Hz, 125 W (other voltage options: 115 V / 100 V)

Scope of delivery

  • T 10 basic ULTRA-TURRAX drive unit, ID No. 0003737000
  • R 200 clamp, ID No. 0003372000

A dispersing tool is not included in the scope of delivery and must be selected separately from the range of accessories to suit the application.

Regulatory information

This unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our Environment and disposal page.

Warranty and procurement service

The T 10 basic is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Our procurement service will assemble suitable dispersing tools, stands or clamps from the T-10 range of accessories.

Display type: Analogue
Max. speed: 30,000 rpm
Power supply: Mains operation
Supply form: Single unit
Volume range: 0.5 ml - 100 ml
Skip product gallery

Matching accessories

Discount In stock
IKA S 10 N - 5 G dispersing tool, 5 mm, 0003304000
IKA S 10 N - 5 G dispersing tool, 5 mm, 0003304000
Manufacturer number: 0003304000
Sale price: €1,168.50
RRP €1,558.00 25% below manufacturer's RRP
Discount In stock
IKA S 10 N - 8 G dispersing tool, Ø 8 mm, 0003305500
IKA S 10 N - 8 G dispersing tool, Ø 8 mm, 0003305500
Manufacturer number: 0003305500
Sale price: €1,168.50
RRP €1,558.00 25% below manufacturer's RRP
Discount In stock
IKA dispersing tool S 10 N - 10 G, Ø 10 mm, 0003370100
IKA dispersing tool S 10 N - 10 G, Ø 10 mm, 0003370100
Manufacturer number: 0003370100
Sale price: €1,168.50
RRP €1,558.00 25% below manufacturer's RRP
Discount In stock
IKA S 10 N - 8 G ST Dispergierwerkzeug, Ø 8 mm, für T 10
IKA S 10 N - 8 G ST Dispersing Tool, Ø 8 mm, for T 10, 0004446500
Manufacturer number: 0004446500
Sale price: €1,265.25
RRP €1,687.00 25% below manufacturer's RRP
Discount In stock
IKA S 10 N - 10 G - ST Dispergierwerkzeug, Ø 10 mm, für T 10
IKA S 10 N - 10 G - ST Dispersing Tool, Ø 10 mm, for T 10, 0004446700
Manufacturer number: 0004446700
Sale price: €1,265.25
RRP €1,687.00 25% below manufacturer's RRP
Discount Promo In stock
IKA S 10 D - 7G - KS - 65 Dispergierwerkzeug, 24 Stück, Ø 7 mm, für T 10
IKA S 10 D - 7G - KS - 65 Dispersing Tool, 24 Pieces, Ø 7 mm, for T 10, 0020002076
Manufacturer number: 0020002076

Content: 24 piece(s) (€20.81 / 1 piece(s))

Sale price: €499.50
RRP €555.00 10% below manufacturer's RRP
Discount Promo In stock
IKA S 10 D - 7 G - KS - 110 plastic dispersing tool, 24 pieces, 0020002075
IKA S 10 D - 7 G - KS - 110 plastic dispersing tool, 24 pieces, 0020002075
Manufacturer number: 0020002075

Content: 24 piece(s) (€23.51 / 1 piece(s))

Sale price: €564.30
RRP €627.00 10% below manufacturer's RRP