IKA S 10 N - 5 G dispersing tool, 5 mm, 0003304000
€1,168.50
% Manufacturer's RRP: €1,558.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 10 N - 5 G dispersing tool, 5 mm, 0003304000"
For samples in the millilitre range, a dispersing tool is required that fits into small vessels. The IKA S 10 N - 5 G (0003304000) has a stator with a diameter of 5 mm and is designed for volumes of 0.5 to 10 ml (based on water). The IKA data sheet specifies the T 10 basic and the T 10 standard as the drive units. The tool operates on the rotor-stator principle.
Rotor, stator and immersion depth
The rotor has a diameter of 3.8 mm; the gap between the rotor and stator is 0.1 mm wide. The peripheral speed is a maximum of 6 m/s. The tool is immersed 20 to 75 mm deep into the sample; the installation length is 92 mm. IKA states that the achievable final fineness is 5 to 25 µm for suspensions and 1 to 10 µm for emulsions.
Materials and resistance
PTFE and AISI 316L stainless steel come into contact with the medium. The tool is suitable for solvents and abrasive substances and is specified for pH values ranging from 2 to 13. The operating temperature must not exceed 180 °C. According to IKA, the tool can be sterilised using all methods. It weighs 0.086 kg.
Typical applications
The S 10 N - 5 G is designed for small sample volumes:
- Preparing emulsions in the millilitre range
- Dispersing suspensions in small vessels
- Processing samples containing solvents, as the tool is suitable for this purpose
- Tasks where the tool needs to be sterilised between samples
Drive
The tool will not operate without a drive. The T 10 basic drive unit is also available. We will clarify the current compatibility with other drives of the T 10 series on request.
Technical details
| Working range (based on H2O) | 0.5 to 10 ml |
|---|---|
| Stator diameter | 5 mm |
| Rotor diameter | 3.8 mm |
| Gap width between stator and rotor | 0.1 mm |
| Peripheral speed | max. 6 m/s |
| Immersion depth | 20 to 75 mm |
| Installation length | 92 mm |
| Product-contact materials | PTFE, AISI 316L |
| pH range | 2 to 13 |
| Suitable for solvents | yes |
| Suitable for abrasive substances | yes |
| Operating temperature | max. 180 °C |
| Sterilisability | all methods |
| Final fineness of suspensions | 5 to 25 µm |
| Final fineness (emulsions) | 1 to 10 µm |
| Weight | 0.086 kg |
Scope of delivery
- 1 x IKA S 10 N - 5 G dispersing tool
The drive is not included in the scope of delivery.
Individual requirements and procurement service
We obtain the drive, additional dispersing tools and accessories for the T 10 on request. The procurement service helps with matching.