Skip to main content Skip to search Skip to main navigation

IKA S 10 N - 8 G dispersing tool, Ø 8 mm, 0003305500

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 10 N - 8 G dispersing tool, Ø 8 mm, 0003305500"

The IKA S 10 N - 8 G dispersing tool is a tool for rotor-stator dispersion in the microlitre and millilitre range. Designed for use with the compact dispersers of the ULTRA-TURRAX T 10 series, this dispersing shaft enables sample preparation of biological, pharmaceutical and chemical media. In applications such as the lysis of tissue cells, the emulsification of cosmetic formulations or the suspension of poorly soluble active ingredients in very small sample vessels, the fluid-dynamic geometry of this tool supports the homogenisation of the sample.

Rotor-stator kinetics and process-related shear dynamics

The mechanical operating principle is based on the tried-and-tested rotor-stator system, in which the inner rotor moves within the fixed stator at extremely high rotational speeds, preferably up to 30,000 revolutions per minute. Due to the small radial gap between the rotor and stator, the sample medium is drawn axially into the dispersion head and then forced radially through the slots of the generator with enormous kinetic energy. The combination of high shear forces, turbulent shear fields and transient cavitation effects enables particle and droplet size reduction down to the micrometre range. The 8 G generator is characterised by an optimised tooth geometry, which enables rapid primary fragmentation of fibrous, tough or cellular sample structures in a single pass.

Material resilience and sterilisation cycles

Sample-contacting parts are stainless steel AISI 316L (1.4404) and PTFE. According to IKA, this material composition offers high chemical resistance to acids, alkalis and organic solvents. For molecular biological and microbiological applications, the sterilisability of the tool is important: the dispersing tool is autoclavable at 121 °C and can be hot-air sterilised up to 180 °C, so that the tool can be sterilised before each use.

Ergonomic design features and working area

The mechanical design features a stator diameter of 8 millimetres and a shaft length of 115 millimetres, enabling work in deep, narrow reaction vessels and Eppendorf cups. The working range covers a sample volume of 0.5 to 50 millilitres, allowing expensive active ingredients and reagents to be dispensed and processed in a material-efficient manner. Thanks to the shaft’s easy disassembly, the tool can be cleaned quickly after use, which can speed up the workflow in the laboratory.

Technical details

Drive & dispersion technology

  • Tool type: Rotor-stator dispersing tool
  • Generator designation: 8 G
  • Operating range (H₂O volume range): 0.5 – 50 ml
  • Max. permissible speed: 30,000 rpm
  • Gap width (radial gap): 0.25 mm

Design & dimensions

  • Stator diameter: 8 mm
  • Rotor diameter: 6.1 mm
  • Shaft length: 115 mm
  • Minimum immersion depth: 20 mm
  • Max. immersion depth: 90 mm
  • Material (in contact with sample): Stainless steel (AISI 316L / 1.4404), PTFE

Resistance and sterilisation

  • Sterilisation methods: Autoclavable (121 °C), hot air (up to 180 °C)
  • Solvent resistance: Yes
  • Acid/alkali resistance: Yes

Scope of delivery

  • 1 x IKA dispersing tool S 10 N - 8 G
  • Safety and cleaning instructions are enclosed

Individual requirements & accessories

For the IKA S 10 N - 8 G dispersing tool to operate as intended, a drive unit from the IKA ULTRA-TURRAX T 10 series (e.g. T 10 basic or T 10 digital) is required. To prevent abrasive wear of the internal PTFE bearings during dry running, the tool must always be immersed sufficiently deep into the sample medium (min. 20 mm) before switching on. Please use our procurement service to select your laboratory peripherals.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 10 basic ULTRA-TURRAX Dispergierer, 0,5 bis 100 ml, bis 30.000 rpm, 0003737000, Produktansicht
IKA T 10 basic ULTRA-TURRAX disperser, 0.5 to 100 ml, up to 30,000 rpm, 0003737000
Manufacturer number: 0003737000
Sale price: €1,205.25
RRP €1,607.00 25% below manufacturer's RRP