Skip to main content Skip to search Skip to main navigation

IKA dispersing tool S 18 N - 10 G, Ø 10 mm, L004639

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA dispersing tool S 18 N - 10 G, Ø 10 mm, L004639"

The IKA S 18 N - 10 G dispersing tool is a tool for rotor-stator dispersion in the millilitre range. Designed for use with the laboratory dispersers of the ULTRA-TURRAX T 18 series, this dispersing shaft enables sample preparation of biological, pharmaceutical and chemical media. In applications such as the disruption of tissue cells, the emulsification of cosmetic formulations or the suspension of poorly soluble active ingredients in laboratory vessels, the precise fluid-dynamic geometry of this tool supports the homogenisation of the sample.

Rotor-stator kinetics and process shear dynamics

The mechanical operating principle is based on the tried-and-tested rotor-stator system, in which the inner rotor moves within the fixed stator at speeds of up to 25,000 revolutions per minute. Due to the small radial gap between the rotor and stator, the sample medium is drawn axially into the dispersion head and then forced radially through the slots of the generator. The combination of high shear forces, turbulent shear fields and transient cavitation effects enables particle and droplet size reduction down to the micrometre range. The 10 G generator is characterised by an optimised tooth geometry, which enables primary fragmentation of fibrous, tough or cellular sample structures across an extended volume range.

Materials and sterilisation

The wetted parts are stainless steel AISI 316L (1.4404) and PTFE. According to IKA, this material composition offers high chemical resistance to acids, alkalis and organic solvents. For molecular biological and microbiological applications, the tool’s sterilisability is important: the dispersing tool is autoclavable at 121 °C and can be hot-air sterilised up to 180 °C, so that the tool can be sterilised before each use.

Ergonomic design features and working area

The mechanical design features a stator diameter of 10 millimetres and a shaft length of 108 millimetres, enabling operation in various reaction vessels and laboratory glassware. The working range covers a sample volume of 1 to 100 millilitres, allowing flexible sample series to be processed efficiently whilst minimising material wastage.

Technical details

Drive & dispersion technology

  • Tool type: Rotor-stator dispersing tool
  • Generator designation: 10 G
  • Operating range (volume range H₂O): 1–100 ml
  • Max. permissible speed: 25,000 rpm
  • Gap width (radial gap): 0.25 mm

Design & dimensions

  • Stator diameter: 10 mm
  • Rotor diameter: 7.5 mm
  • Shaft length: 108 mm
  • Minimum immersion depth: 20 mm
  • Max. immersion depth: 85 mm
  • Material (in contact with sample): Stainless steel (AISI 316L / 1.4404), PTFE

Resistance and sterilisation

  • Sterilisation methods: Autoclavable (121 °C), hot air (up to 180 °C)
  • Solvent resistance: Yes
  • Acid/alkali resistance: Yes

Scope of delivery

  • 1 x IKA S 18 N - 10 G dispersing tool
  • Safety and cleaning instructions are enclosed

Important note: A suitable drive unit from the IKA ULTRA-TURRAX T 18 series and stand accessories are not included in the standard scope of delivery and must be ordered separately.

Individual requirements & accessories

For the IKA S 18 N - 10 G dispersing tool to operate as intended, a drive unit from the IKA ULTRA-TURRAX T 18 series (e.g. T 18 digital) is required. To avoid abrasive wear of the internal PTFE bearings during dry running, the tool must always be immersed sufficiently deep into the sample medium (min. 20 mm) before switching on. We can source PTFE replacement seals and maintenance kits on request. Please use our procurement service to select your laboratory peripherals.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
Manufacturer number: 0003720000
Sale price: €1,305.53
RRP €1,830.00 28% below manufacturer's RRP