Skip to main content Skip to search Skip to main navigation

IKA S 25 EC - T - C - 25 G - ST dispersing tool, Ø 25 mm, temperature sensor, easy clean, 0025002595

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 25 EC - T - C - 25 G - ST dispersing tool, Ø 25 mm, temperature sensor, easy clean, 0025002595"

IKA cites dispersing applications in biochemistry and pharmaceuticals as typical uses for the S 25 EC - T - C - 25 G - ST (0025002595), such as the emulsification of heat-sensitive pharmaceutical intermediates. The autoclavable tool has a 25 mm stator and a 20 mm rotor, processes volumes of 0.05 to 2 l and incorporates a temperature sensor. The suffix ST stands for sawtooth.

Temperature and operating hours

The integrated sensor measures from 0 to 125 °C and provides the value during use. The drive keeps track of operating hours; a message appears on the display when maintenance is due. IKA specifies the T 25 easy clean control as the drive. The maximum operating temperature of the unit is 120 °C.

Cleaning according to the ‘easy-clean’ principle

When the clamp is turned and lowered, the shaft and rotor drop out until the rotor has completely left the stator. The shaft tube can then also be rinsed internally. The shaft runs in a ceramic plain bearing; the parts in contact with the product are made of AISI 316L and ceramic.

Gap, fineness and dimensions

The gap is 0.5 mm; at 25,000 rpm, a speed of 26.2 m/s is achieved at the rotor circumference. The final fineness ranges from 15 to 50 µm for suspensions and from 1 to 10 µm for emulsions. The tool has an immersion depth of 45 to 150 mm, is 191 mm long, weighs 0.634 kg and is suitable for solvents and abrasive materials.

Typical applications

  • Dispersion in biochemistry and pharmaceuticals, including heat-sensitive intermediates
  • Batches of 0.05 to 2 l with temperature measurement
  • Emulsions with a final fineness of 1 to 10 µm
  • Samples containing abrasive components
  • Work involving solvents
  • Sample series with maintenance instructions based on operating hours

Technical details

Processable volume (H2O)0.05 to 2 l
Stator diameter25 mm
Rotor diameter20 mm
Stator/rotor gap width0.5 mm
Max. permissible speed25,000 rpm
Max. peripheral speed26.2 m/s
Immersion depth45 to 150 mm
Installation length191 mm
Bearing typeCeramic plain bearing
Materials in contact with the productAISI 316L, ceramic
pH range2 to 13
Suitable for solventsYes
Suitable for abrasive substancesYes
Temperature measurement range0 to 125 °C
Max. operating temperature120 °C
Sterilisabilityall methods except hot air
Final fineness, suspensions15 to 50 µm
Final fineness, emulsions1 to 10 µm
Weight0.634 kg

Scope of delivery

  • 1 x IKA S 25 EC - T - C - 25 G - ST dispersing tool (single tool)
  • The T 25 easy clean control drive is not included in the scope of delivery.

With and without a sensor

The S 25 EC - C - 25 G - ST has the same geometry but without a temperature sensor; its operating temperature is 180 °C and it has an immersion depth of 35 to 150 mm. The S 25 EC - T - C - 25 G operates with a sensor, but features a 17 mm rotor and a speed of 22.2 m/s. Those requiring an 18 mm rotor and a final fineness of 1 to 5 µm for emulsions will find this in the S 25 EC - T - C - 25 F.

Individual requirements & procurement service

We can source the T 25 easy clean control drive and other tools on request. The procurement service assists with selection.

Skip product gallery

Matching accessories

Discount In stock
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
Manufacturer number: 0025007380
Sale price: €82.50
RRP €110.00 25% below manufacturer's RRP