Kern PCB 200-3 compact laboratory balance, 200 g / 0.001 g, IoT Line
€270.00
% Manufacturer's RRP: €300.00 10% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Kern PCB 200-3 compact laboratory balance, 200 g / 0.001 g, IoT Line"
The Kern PCB 200-3 weighs up to 200 g and displays readings to 0.001 g, i.e. to the nearest milligram. It is part of the IoT range of Kern compact scales. Its data is transmitted via the Kern Universal Port (KUP), to which interface adaptors can be connected.
One milligram readability in a compact housing
Reproducibility and readability are both 0.001 g, whilst linearity is ± 0.005 g. Under laboratory conditions, the reading stabilises within 3 seconds after placing the sample on the balance; the warm-up time before the first weighing is 120 minutes. Kern specifies the minimum weight according to USP as 2 g. The weighing pan has a diameter of 82 mm and is made of plastic with a conductive coating. A ring-shaped draught shield with a weighing chamber 90 mm in diameter and 40 mm high is included as standard. An anti-shock system is located between the weighing pan and the load cell, which dampens vibrations during weighing.
Connection via the Kern Universal Port
The PCB 200-3 comes with the KUP slot as standard. Depending on requirements, this can accommodate an adapter for RS-232 (KUP-01, 1.5 m cable), USB device (KUP-03, 1.5 m cable), Ethernet (KUP-04), Wi-Fi (KUP-05) or Bluetooth BLE 4.0 (KUP-06). With the KUP-13 extension box, up to three adapters can be used simultaneously on a single scale. Weighing data is transmitted via the adapters to a network, PC, smartphone, tablet, laptop or printer; conversely, control commands and data entries can be sent to the balance. The Kern Communication Protocol (KCP) also enables data retrieval and remote control via external control units or computers.
Weighing functions in everyday use
The PRE-TARE function subtracts a known container weight in advance. With the recipe function, the ingredients of a mixture are weighed in one after the other; the total weight of all ingredients can be displayed for checking. When weighing within a tolerance range (checkweighing), a visual signal assists with portioning, dosing and sorting; the optional CFS-A03 signal lamp provides additional visual confirmation of tolerance weighing. The weighing unit is freely programmable, for example for thread length in g/m or paper weight in g/m². For piece counting, the minimum piece weight is 20 mg, and 2 mg under laboratory conditions; the counting resolution is 100,000.
Adjustment and test weights
The balance is adjusted using an external weight. Kern recommends a 200 g adjustment weight of class F1. The matching single weight is 326-08 (F1, 200 g, Eco-Form, polished stainless steel) and the Safety Set 315-208-304 containing 10 g (F2) and 200 g (F1) weights. A DAkkS calibration certificate is available under item no. 963-127.
Power supply: batteries, power supply unit or rechargeable battery
The balance runs on four AA batteries (1.5 V) or via the power supply unit rated at 100 to 240 V and 50/60 Hz. An internal rechargeable battery is optional; it takes 8 hours to charge. Kern specifies an operating time of 20 hours, or 48 hours with the backlight switched off. Mains adaptors for sockets in the EU, the UK, the USA and Switzerland are included in the scope of delivery.
Position within the PCB series
The Kern PCB 300-3 features the same 82 mm diameter weighing pan, with a weighing range of 360 g and a readability of 0.001 g. For those who require a 300 g weighing range with a readability of 0.01 g, the Kern PCB 300-2 offers a stainless steel weighing pan with a diameter of 105 mm. The PCB 200-3 has the smallest weighing range of these three, but shares the readability of 0.001 g with the PCB 300-3.
Typical applications
With a readability of 0.001 g and a weighing range of 200 g, the PCB 200-3 is suitable for weighing small quantities. The scale’s functions make it suitable for the following applications:
- Weighing small sample quantities up to 200 g
- Weighing in mixture components according to a recipe
- Portioning and dosing within a tolerance range
- Counting small parts with a unit weight from 20 mg
- Transfer of measured values to a PC, network or printer via a KUP adapter
Frequently asked questions
What interfaces does the PCB 200-3 have?
The KUP slot is fitted as standard. RS-232, USB device, Ethernet, Wi-Fi and Bluetooth BLE 4.0 are available as plug-in KUP adapters; up to three can be used simultaneously via the KUP-13 extension box.
How is the balance adjusted?
Using an external weight. Kern recommends a 200 g Class F1 weight.
Does the balance work without a mains socket?
Yes, with four AA batteries or with the optional internal rechargeable battery.
What is the minimum weight of a sample?
The minimum weight according to USP is 2 g. For piece counting, the minimum piece weight is 20 mg; under laboratory conditions, it is 2 mg.
How long is the warranty?
According to Kern & Sohn, this device comes with a 2-year warranty. Kern grants 3 years on products with a list price of €500 or more and 2 years on products below that and on components; wear parts such as batteries and rechargeable batteries are excluded. Warranty repairs are carried out by Kern or by a Kern dealer.
Technical details
| Weighing range (max) | 200 g |
|---|---|
| Readability (d) | 0.001 g |
| Reproducibility | 0.001 g |
| Linearity | ± 0.005 g |
| Minimum weight (USP) | 2 g |
| Tare range | 200 g |
| Stabilisation time (laboratory conditions) | 3 s |
| Warm-up time | 120 min |
| Minimum piece weight | 20 mg, 2 mg under laboratory conditions |
| Count resolution | 100,000 |
| Weighing pan | Ø 82 mm, plastic, with conductive coating |
| Draught shield | ring-shaped, weighing chamber Ø 90 x 40 mm, plastic |
| Display | Digit height 21 mm, backlighting |
| Adjustment | external, recommended adjustment weight 200 g (F1) |
| Interfaces | KUP; optional RS-232, USB device, Ethernet, Wi-Fi, Bluetooth via KUP adapter |
| Power supply | 4 x AA (1.5 V), power supply unit 100 V to 240 V AC, 50/60 Hz, optional internal rechargeable battery |
| Operating time | 20 hours; 48 hours with backlight switched off |
| Charging time (rechargeable battery) | 8 hours |
| Ambient temperature | -10 °C to 40 °C |
| Humidity | max. 80 % |
| Degree of protection (display) | No IP rating |
| Housing (W x D x H) | 163 x 245 x 65 mm, plastic |
| Weight (net) | 1.00 kg |
Scope of delivery
- PCB 200-3 compact laboratory balance
- Ring-shaped draught shield
- Mains power supply with mains adaptors for the EU, UK, USA and Switzerland
- Protective working cover
Interface adaptors, printer, test weights and the internal rechargeable battery are not included.
Regulatory information
As an electrical device, the balance falls under the ElektroG. The manufacturer Kern & Sohn GmbH is registered under the WEEE registration number DE 80821200. How to return old appliances is described on the page Environment and disposal.
Individual requirements and procurement service
For the PCB 200-3, Kern supplies test weights, interface adaptors, printers, replacement protective working covers (individually or in packs of 5) and anti-vibration plates or an anti-vibration table to counteract vibrations at the installation site. Our procurement service will put together the right combination for you on request.
| Weighing range (Max): | 200 g |
|---|---|
| Readability (d): | 0,001 g |
| Verifiable: | no |