Skip to main content Skip to search Skip to main navigation

Kern PCB 300-2 compact laboratory balance, 300 g / 0.01 g, stainless steel weighing pan Ø 105 mm

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Kern PCB 300-2 compact laboratory balance, 300 g / 0.01 g, stainless steel weighing pan Ø 105 mm"

The Kern PCB 300-2 weighs up to 300 g and has a readability of 0.01 g, i.e. one centigram. Its stainless steel weighing pan has a diameter of 105 mm, making it larger than the plastic plate on the sister models with a readability of 0.001 g.

Accuracy in the centigram range

Reproducibility and readability are both 0.01 g, whilst linearity is ± 0.02 g. Under laboratory conditions, the reading stabilises after 3 seconds. The balance should be allowed to warm up for 120 minutes before the first weighing. Kern specifies 20 g as the minimum weight according to USP. An anti-shock system between the weighing pan and the load cell reduces vibrations during weighing; the housing is made of plastic and measures 163 x 245 x 65 mm. The display features 21 mm high digits with backlighting. A spirit level and adjustable screw feet are included and help to level the balance on the table.

Tolerance weighing and piece counting

When weighing within a tolerance range (checkweighing), a visual signal assists with portioning, dosing and sorting. Users who wish to make the signal more visible can use the optional CFS-A03 signal lamp. The balance also counts items: The minimum piece weight is 200 mg, or 20 mg under laboratory conditions, with a counting resolution of 15,000. The PRE-TARE function allows a known container weight to be subtracted in advance, whilst the recipe function is used to weigh in several ingredients one after the other.

Adjustment

The balance is adjusted using an external weight. Kern recommends M1-class adjustment weights of 200 g and 100 g, totalling 300 g. The DAkkS calibration certificate has the item no. 963-127.

Interfaces and software connectivity

The PCB 300-2 features a KUP slot. RS-232 (KUP-01), USB device (KUP-03), Ethernet (KUP-04), Wi-Fi (KUP-05) and Bluetooth BLE 4.0 (KUP-06) are available as plug-in adaptors; the KUP-13 extension box can operate up to three of these in parallel. Using the Kern Communication Protocol (KCP), the balance can be queried and remotely controlled from a computer.

Typical applications

  • Weighing up to 300 g with a resolution of 0.01 g
  • Tolerance weighing for portioning, dosing and sorting
  • Weighing mixtures according to a recipe
  • Piece counting from 200 mg per piece
  • Data transfer to a PC, printer or network

Which PCB is suitable?

The Kern PCB 200-3 operates with a readability of 0.001 g and a weighing range of 200 g, whilst the Kern PCB 300-3 has a weighing range of 360 g. The Kern PCB 2000-1 has a significantly larger weighing range of 2,000 g with a readability of 0.1 g. The PCB 300-2 falls somewhere in between: a 300 g weighing range, 0.01 g readability and a stainless steel platform.

Frequently asked questions

What material is the weighing pan made of? Stainless steel, 105 mm in diameter.

Which adjustment weights does Kern recommend?
200 g and 100 g of class M1, totalling 300 g. Adjustment is carried out externally.

How long does the balance run on battery power?
Kern specifies 20 hours; 48 hours with the backlight switched off. The rechargeable battery is optional and takes 8 hours to charge.

Is the display protected against dust or water?
The display does not have an IP rating. The maximum permissible relative humidity during operation is 80 %.

How long is the warranty?
According to Kern & Sohn, this device comes with a 2-year warranty. Kern grants 3 years on products with a list price of €500 or more and 2 years on products below that and on components; wear parts such as batteries and rechargeable batteries are excluded. Warranty repairs are carried out by Kern or by a Kern dealer.

Technical details

Weighing range (max)300 g
Readability (d)0.01 g
Reproducibility0.01 g
Linearity± 0.02 g
Minimum weight (USP)20 g
Stabilisation time (laboratory conditions)3 s
Warm-up time120 min
Minimum piece weight200 mg, 20 mg under laboratory conditions
Count resolution15,000
Weighing panØ 105 mm, stainless steel
DisplayDigit height 21 mm, backlighting
AdjustmentExternal, recommended adjustment weights 200 g (M1) and 100 g (M1)
InterfacesKUP; optional RS-232, USB device, Ethernet, Wi-Fi, Bluetooth via KUP adapter
Power supply4 x AA (1.5 V), power supply unit 100 V to 240 V AC, 50/60 Hz, optional internal rechargeable battery
Operating time20 hours; 48 hours with backlight switched off
Charging time (rechargeable battery)8 hours
Ambient temperature-10 °C to 40 °C
Humiditymax. 80 %
Housing (W x D x H)163 x 245 x 65 mm, plastic
Weight (net)1.2 kg

Scope of delivery

  • PCB 300-2 compact laboratory balance
  • Mains power supply with mains adaptors for the EU, UK, USA and Switzerland
  • Protective working cover

Regulatory information

As an electrical device, the balance falls under the ElektroG. The manufacturer Kern & Sohn GmbH is registered under the WEEE registration number DE 80821200. How to return old appliances is described on the page Environment and disposal.

Individual requirements and procurement service

Kern offers test weights, interface adaptors, printers, replacement protective working covers and anti-vibration plates or an anti-vibration table for the PCB 300-2. Our procurement service will put together the right combination for you on request.

Weighing range (Max): 300 g
Readability (d): 0.01 g
Verifiable: no