Memmert reinforced stainless steel perforated tray B68521 for sizes 450 and 750, option K1 required
€842.80
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Memmert reinforced stainless steel perforated tray B68521 for sizes 450 and 750, option K1 required"
Only for units with factory option K1. The perforated tray only fits units that were equipped with option K1 at the factory, a modification of the interior with support rails for reinforced grids and perforated trays. This option is available for sizes 450 and 750 and only ex works. If in doubt, ask us before ordering and state the serial number of your unit. For a new unit, option K1 can be ordered on request. The size corresponds to the number in the unit name, for example IF450 or IN450.
According to Memmert, the reinforced stainless steel perforated tray B68521 can bear up to 60 kg and is supplied with guide rails and fixing screws. According to Memmert, the standard perforated tray B68518 carries 30 kg per shelf in these sizes. The perforated tray is a shelf level in the interior. It is intended for Memmert units in the U, UF TS, I, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. The image is for illustration only.
Please note the maximum load per unit. It limits the total load of all shelves. The table of compatible models shows which series is available in which size.
Typical applications
Typical uses in the compatible units:
- Heavier loading with reinforced grids or perforated trays up to 60 kg in conjunction with option K1, for example in the IPP750ecoplus
- Heat treatment of very large material batches in industrial multi-shift operation, for example in the UN750
- Environmental tests from freezing point upwards for larger, heavy test specimens, for example in the HPP750eco
Suitable for
| Model | Size | Interior volume (l) |
|---|---|---|
| IF450 | 450 | 449 |
| IN450 | 450 | 449 |
| IF450plus | 450 | 449 |
| IN450plus | 450 | 449 |
| ICP450 | 450 | 449 |
| UF450 | 450 | 449 |
| UN450 | 450 | 449 |
| UF450plus | 450 | 449 |
| UN450plus | 450 | 449 |
| UF450TS | 450 | 449 |
| HPP750eco | 750 | 749 |
| IF750 | 750 | 749 |
| IN750 | 750 | 749 |
| IF750plus | 750 | 749 |
| IN750plus | 750 | 749 |
| ICH750 | 750 | 749 |
| ICP750 | 750 | 749 |
| IPP750eco | 750 | 749 |
| IPP750ecoplus | 750 | 749 |
| UF750 | 750 | 749 |
| UN750 | 750 | 749 |
| UF750plus | 750 | 749 |
| UN750plus | 750 | 749 |
| UF750TS | 750 | 749 |
Technical details
| Material | Stainless steel |
|---|---|
| Version | reinforced |
| Load capacity according to Memmert | up to 60 kg |
| Required option | K1 (ex works only) |
Scope of delivery
- 1 reinforced stainless steel perforated tray with guide rails and fixing screws
Individual requirements & procurement service
For standard perforated trays, grids and drip trays of the same size, for questions about option K1 and about compatibility with units not listed in the table, our procurement service accepts enquiries.