Memmert UN450 universal oven, large-capacity heating and drying oven with natural convection, 449 litres, up to 300 °C
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Memmert UN450 universal oven, large-capacity heating and drying oven with natural convection, 449 litres, up to 300 °C"
The Memmert UN450 universal oven offers an internal volume of 449 litres within a comparatively modest overall height of 1,247 mm, meaning it fits even under lower ceilings where a taller model would not. Like all natural convection models in the series, it operates without a fan in the temperature range from 20 to 300 °C and is powered by three-phase current due to the heating power required. For industrial and research facilities wishing to heat-treat large batches without vibration, without needing a particularly tall unit, the UN450 is the suitable solution.
Natural convection with a large internal volume
Even with an internal volume of 449 litres, the Memmert UN450 universal oven does not require an air turbine or a forced air circulation motor. Heat rises purely by convection, without a fan stirring up dust or light sample particles within the large interior. The working temperature range extends from at least 5 °C above room temperature up to 300 °C. Natural convection remains in high demand even in this size category, particularly for industrial material samples that must not be affected by air movement. A Pt100 temperature sensor of DIN Class A in a 4-wire configuration provides a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards.
ControlCOCKPIT SingleDISPLAY and three-phase connection
The UN450 is controlled via the ControlCOCKPIT SingleDISPLAY, an adaptive, multifunctional digital PID microprocessor controller with a TFT colour graphic display, which can be used to set the temperature, exhaust air damper position, programme duration and time zone. A digital countdown timer ranging from 1 minute to 99 days and the SetpointWAIT function, which only starts the process time once the setpoint temperature has been reached, ensure reproducible processes, even during long, unattended runs. As a chamber of this size requires correspondingly higher heating capacity, the UN450 is powered by 400 V three-phase current and 3 x 230 V without a neutral conductor at 50/60 Hz and with a power consumption of approximately 5,800 W, rather than the single-phase connection used by the smaller models. The data logger can be read via the Ethernet interface; a time-limited trial version of the AtmoCONTROL software is available for download.
Capacity of the Memmert UN450 universal oven
The internal dimensions are 1,040 x 720 x 600 mm; the external dimensions of the cabinet are 1,224 x 1,247 x 784 mm. There is space for up to 8 shelves; 2 electropolished stainless steel grid shelves are included in the scope of delivery. The UN450 can be loaded with a total of up to 300 kg; each shelf can hold up to 30 kg, which is more than the smaller UN models, which allow 20 kg per shelf. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The fully insulated stainless steel doors are secured by a 2-point locking mechanism with a compression door lock.
Same footprint, different heights
Within the Memmert UN series with natural convection, the internal volume ranges from 32 to 749 litres. The UN450 and UN750 share the same floor space and differ only in their overall height, which is an important selection criterion where room heights are low.
| Model | Internal volume |
|---|---|
| UN30 | 32 l, footprint 585 x 434 mm, max. 3 shelves |
| UN55 | 53 l, footprint 585 x 514 mm, max. 4 shelves |
| UN75 | 74 l, footprint 585 x 514 mm, max. 6 shelves |
| UN110 | 108 l, footprint 745 x 584 mm, max. 5 shelves |
| UN260 | 256 l, footprint 824 x 684 mm, max. 9 shelves |
| UN450 | 449 l, footprint 1,224 x 784 mm, max. 8 shelves |
| UN750 | 749 l, footprint 1,224 x 784 mm, max. 14 shelves |
If you require the maximum capacity within this footprint and have a room height of more than 1.72 m, choose the Memmert UN750 universal oven with 749 litres and 14 shelves. If a smaller volume with a smaller footprint is sufficient, the Memmert UN260 universal oven with 256 litres is the suitable alternative. The full range of climate chambers and incubators can be found under Climate Chambers & Incubators.
Difference between natural convection and forced air circulation, UN450 and UF450
In addition to the UN450 with natural convection, there is also the Memmert UF450 universal oven, the structurally identical large forced air circulation version with an electronically controllable air turbine. The UF450 actively distributes heat throughout the interior and reaches its working temperature range from as low as 10 °C above room temperature, which ensures shorter heating times for densely packed batches of varying sizes. The UN450 deliberately avoids this and instead starts operating from just 5 °C above room temperature, with no air movement inside the chamber; this is suitable for large quantities of material samples that are sensitive to dust or vibration. Both models share the same interior, housing and ControlCOCKPIT SingleDISPLAY, but differ in their ventilation principle and working temperature range.
Safety according to DIN 12880 for long, unattended processes
Process safety is crucial, particularly for large-volume batches that often run overnight or for several days. The UN450 features adjustable electronic temperature monitoring plus a mechanical temperature limiter of protection class 1 according to DIN 12880, which switches off the heating when the temperature reaches approximately 20 °C above the maximum cabinet temperature. A self-diagnostic system assists with fault-finding, and 3 freely selectable temperature values can be calibrated. CE and EAC markings, as well as a UL test mark, are provided.
Installation, operation and disposal
The same spacing requirements apply to the operation of the UN450 as for the smaller models: a minimum of 15 cm from the wall, a minimum of 20 cm from the ceiling and a minimum of 5 cm to the side, either from a wall or an adjacent unit. Given a net weight of around 161 kg and the three-phase power connection, the installation site should be fitted with a suitable heavy-current power connection prior to delivery. The unit may be installed at altitudes of up to 2,000 m above sea level, at ambient temperatures of 5 °C to 40 °C and with a maximum relative humidity of 80 %, non-condensing. Electrically, the UN450 is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. As an electrical appliance, the UN450 is subject to the Electrical and Electronic Equipment Act at the end of its service life and must not be disposed of with household waste.
Typical applications
With an internal volume of 449 litres, up to 8 shelves and a load capacity of up to 300 kg, the Memmert UN450 universal oven is designed for high-throughput applications where headroom at the installation site is also limited.
- Large-volume drying and heat treatment batches in industry and research
- Routine tempering, ageing and baking of material samples
- Material testing and quality assurance with high sample throughput
- Vibration-free heat treatment of dust-sensitive materials on a large scale
- Installation sites with limited headroom where a UN750 will not fit
Shelves, access control and process monitoring
The UN450 is supplied with 2 electropolished stainless steel grid shelves as standard; the cabinet is designed to accommodate up to 8 shelves, each with a maximum load of 30 kg. Options for process monitoring include a 4–20 mA current interface, fan speed monitoring, an additional Pt100 sensor and SMS alerts; for controlled access, there is a lockable door with a security lock. Those requiring a gas-tight version with various pipe penetrations can also have this configured. In addition, we arrange base frames with levelling, as well as calibration, IQ/OQ/PQ services according to DIN 12880 and maintenance contracts, including DAkkS calibration on request.
Frequently asked questions before purchase
Why does the UN450 require three-phase power?
A cabinet of this size requires significantly more heating power (around 5,800 W) than the smaller UN models; therefore, the UN450 is operated with 400 V three-phase power and 3 x 230 V without a neutral conductor, rather than a single-phase connection.
How does the UN450 differ from the UF450?
Both share the same interior, housing and control system; however, the UF450 also features an electronically controllable air turbine for active air circulation and starts its working temperature range at 10 °C rather than 5 °C above room temperature.
How tall is the UN450 and will it fit under a standard ceiling?
The external dimensions are 1,224 x 1,247 x 784 mm; with a height of 1,247 mm, the UN450 also fits into rooms where the taller UN750, at 1,720 mm, would no longer fit.
What is the maximum load per shelf?
Up to 30 kg per shelf, with a total load of up to 300 kg for the entire unit when fitted with a maximum of 8 shelves.
What is the accuracy of the temperature control?
Despite the three-phase power supply, the same accuracy applies across the range as for the smaller models: 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C, measured using a DIN Class A Pt100 sensor with 4-wire technology.
Is the UN450 suitable for long, unattended processes?
The mechanical temperature limiter, of protection class 1 according to DIN 12880, switches off the heating element in the event of an overtemperature of approximately 20 °C. Information on long processes is available on request.
Technical details
| Setting temperature range | 20 to 300 °C |
|---|---|
| Working temperature range | at least 5 °C above room temperature up to 300 °C |
| Temperature setting accuracy | up to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C |
| Temperature sensor | Pt100, DIN Class A, 4-wire measurement |
| Internal volume | 449 l |
| Internal dimensions (W x H x D) | 1,040 x 720 x 600 mm |
| External dimensions of housing (W x H x D) | 1,224 x 1,247 x 784 mm |
| Net weight | approx. 161 kg |
| Connection | 400 V and 3 x 230 V without neutral conductor, 50/60 Hz, approx. 5,800 W |
| Maximum number of shelves | 8 |
| Shelves included in the scope of delivery | 2 |
| Max. load capacity | 300 kg |
| Max. load per shelf | 30 kg |
| Interior material | Stainless steel, 4-sided all-round heating |
| Casing material | Textured stainless steel, galvanised sheet steel rear panel |
| Control system | ControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphic display |
| Timer | 1 minute to 99 days, digital countdown timer |
| Permissible ambient temperature | 5 °C to 40 °C |
| Permissible relative humidity | max. 80 % rel., non-condensing |
| Maximum installation height | 2,000 m |
| Markings | CE, EAC, UL test mark |
Scope of delivery
- 1x Memmert UN450 universal oven
- Factory calibration certificate (calibrated at 160 °C)
- Fully insulated stainless steel doors with 2-point locking (compression door lock)
- 2x stainless steel grid shelves, electropolished
Regulatory information
The Memmert UN450 universal oven is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.
Installation in a wall opening
For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29740) or without air slots (B29741). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.
Individual requirements & procurement service
Options available for the UN450 include a lockable door with a security lock, a gas-tight version with various pipe feed-throughs, and reinforced grid shelves and perforated sheets. For process monitoring, a 4–20 mA current interface, fan speed monitoring, an additional Pt100 sensor and SMS alerts are available. In addition, we arrange base frames with levelling, as well as calibration, IQ/OQ/PQ services according to DIN 12880 and maintenance contracts. Do you require any of these accessories or assistance in selecting the right universal oven for your application? Through our procurement service, we will be happy to assist you with procurement and configuration.
| Certification marks: | GS (VDE) |
|---|---|
| Volume: | 449 l |