Memmert UN110 universal oven, heating and drying oven with natural convection, 108 litres, up to 300 °C
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Memmert UN110 universal oven, heating and drying oven with natural convection, 108 litres, up to 300 °C"
The Memmert UN110 universal oven is a heating and drying oven from the Memmert UN series. With an internal volume of 108 litres, it marks the transition from the compact benchtop units of the UN series to a noticeably larger footprint and greater loading capacity, whilst continuing to operate using purely natural convection within a temperature range of 20 to 300 °C. For laboratories that regularly dry, temper or cure larger batches or several batches in parallel, without giving up vibration-free operation, the UN110 is the obvious choice between a compact benchtop unit and a large-volume floor-standing cabinet.
Natural convection for larger batches
The Memmert UN110 universal oven also deliberately does not feature an air turbine or a forced air circulation motor. Heat rises within the chamber purely by convection, without dust or light sample particles being stirred up by a fan. As a result, the working temperature range starts from at least 5 °C above room temperature up to 300 °C. With an internal volume of 108 litres and several shelves occupied simultaneously, uniform natural heat distribution remains crucial, particularly when sensitive or exposed samples must not be affected by air movement. A Pt100 temperature sensor of DIN Class A in a 4-wire configuration ensures a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards.
ControlCOCKPIT SingleDISPLAY: Operation and data acquisition
The UN110 is controlled via the ControlCOCKPIT SingleDISPLAY, an adaptive, multifunctional digital PID microprocessor controller with a high-resolution TFT colour graphics display. You can set the temperature in Celsius or Fahrenheit, as well as the position of the exhaust air flap, the programme duration, the time zone and summer/winter time. A digital countdown timer with target time can be set from 1 minute to 99 days; the SetpointWait function only starts the process time once the setpoint temperature has actually been reached, ensuring reproducible results for larger batches. The data logger can be read out and managed via the Ethernet interface; a time-limited trial version of the AtmoCONTROL software is available for download.
Capacity and dimensions of the Memmert UN110 universal oven
The interior measures 560 x 480 x 400 mm, whilst the external dimensions are 745 x 864 x 584 mm, representing a noticeably larger footprint than the smaller UN30, UN55 and UN75 models. The scope of delivery includes two electropolished stainless steel grid shelves, and the cabinet can accommodate up to five shelves in total. The maximum load capacity is 175 kg for the entire unit and 20 kg per shelf. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The UN110 is connected to either 230 V (approx. 2,800 W) or 115 V (approx. 1,800 W), in each case at 50/60 Hz.
Selection guide: moving to a larger floor area
The Memmert UN series with natural convection covers internal volumes ranging from 32 to 749 litres. The UN110 is the first model in the range to feature a noticeably larger footprint compared with the three smaller benchtop models.
| Model | Internal volume |
|---|---|
| UN30 | 32 l, footprint 585 x 434 mm, 3 shelves max. |
| UN55 | 53 l, footprint 585 x 514 mm, max. 4 shelves |
| UN75 | 74 l, footprint 585 x 514 mm, max. 6 shelves |
| UN110 | 108 l, footprint 745 x 584 mm, 5 shelves max. |
| UN260 | 256 l, footprint 824 x 684 mm, max. 9 shelves |
| UN450 | 449 l, footprint 1,224 x 784 mm, max. 8 shelves |
| UN750 | 749 l, footprint 1,224 x 784 mm, max. 14 shelves |
Anyone upgrading from the UN75 (74 litres, same footprint as the UN55) who requires more capacity and a higher load capacity per unit will find the UN110 to be the suitable next step. If even that is no longer sufficient, the Memmert UN260 universal oven offers a significantly larger, freestanding model with a capacity of 256 litres. The full range of climate chambers and incubators can be found under Climate Chambers & Incubators.
Distinction: natural convection versus forced-air circulation
Anyone requiring more active heat distribution and shorter heating times for similar volumes, for example, with densely packed batches of varying sizes, will find the Memmert UF160 universal oven to be the suitable forced air circulation counterpart, featuring an electronically controllable air turbine. Its working temperature range starts at 10 °C rather than 5 °C above room temperature. For samples sensitive to dust or air movement, the natural convection of the UN110 remains the more suitable choice. A significantly more compact natural convection model for smaller sample quantities is the Memmert UN30 universal oven. Like all standard models in the UN series, the UN110 operates with the ControlCOCKPIT SingleDISPLAY, rather than the TwinDISPLAY reserved for the ‘plus’ variants.
Safety according to DIN 12880 even for larger batches
The UN110 features adjustable electronic temperature monitoring and a mechanical temperature limiter (protection class 1 according to DIN 12880), which switches off the heating when the temperature rises to approximately 20 °C above the maximum cabinet temperature, an important safety feature for overnight or weekend runs when several shelves are in use simultaneously. A self-diagnostic system assists with fault-finding, and three freely selectable temperature values can be calibrated. The unit bears CE and EAC markings as well as a UL test mark.
Installation, operation and disposal
For operation, a minimum clearance of 15 cm from the wall and a minimum clearance of 20 cm from the ceiling must be maintained; a minimum clearance of 5 cm is sufficient on either side from the wall or an adjacent unit. With a net weight of around 74 kg, it is recommended that the UN110 be placed on a sturdy, load-bearing base rather than simply on a laboratory bench. It may be installed at altitudes of up to 2,000 m above sea level at an ambient temperature of 5 °C to 40 °C and a relative humidity of no more than 80 %, non-condensing. Electrically, the UN110 is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. As an electrical appliance, the UN110 is subject to the German Electrical and Electronic Equipment Act (ElektroG) at the end of its service life and must not be disposed of with household waste.
Typical applications
With an internal volume of 108 litres and a load capacity of up to 175 kg, the Memmert UN110 universal oven is suitable for laboratories and businesses that regularly dry or heat-treat large quantities of samples.
- Drying large quantities of laboratory glassware and sample containers
- Vibration-free drying of dust- or air-sensitive materials in multiple batches
- Tempering, ageing and firing of material samples in industrial quality assurance
- Material tests with a higher sample throughput than with the smaller UN models
- Science and research involving varying, sometimes larger, series
Investment rationale: Equipment for higher throughput
The scope of delivery for the UN110 includes 2 electropolished stainless steel grid shelves; the cabinet is designed to accommodate up to 5 shelves, each with a maximum load of 20 kg. If you regularly use all levels, you can add further grid shelves or perforated trays. For visual inspection without opening the door, a full-view glass door is available, along with interior lighting and a socket for additional measuring equipment, as well as a levelling or mobile base for flexible repositioning. For gas-tight applications, a corresponding version including gas supply and exhaust is available. For continuous data logging, an AtmoCONTROL software licence is recommended; for applications subject to standards, calibration and IQ/OQ/PQ services are available, including DAkkS calibration on request.
Frequently asked questions before making a purchase
When is the UN110 a good choice?
Compared with compact benchtop units, it offers a significantly larger internal volume and a more robust base, without sacrificing the benefits of natural convection.
Will the UN110 still fit on a laboratory bench?
With a net weight of around 74 kg and a footprint of 745 x 584 mm, a sturdy, load-bearing base is recommended rather than a standard laboratory bench.
How many samples can be loaded at the same time?
Up to 5 shelves, each with a maximum load of 20 kg, giving a total load capacity of up to 175 kg.
What is the accuracy of the temperature control?
The DIN Class A Pt100 sensor, using 4-wire technology, provides an accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards, regardless of the cabinet size within the UN series.
Is the UN110 also available with forced air circulation?
The direct counterpart with forced air circulation in a similar size range is the Memmert UF160 universal oven, with a capacity of 161 litres and an electronically controlled air turbine.
Is a gas-tight design possible?
Yes, a virtually gas-tight interior with gas inlet and outlet connections is one of the common options for the UN110.
Is the UN110 suitable for unattended operation?
The mechanical temperature limiter of protection class 1 according to DIN 12880 switches off the heating if the temperature rises by approximately 20 °C and is designed for night-time or weekend operation.
Technical details
| Setting temperature range | 20 to 300 °C |
|---|---|
| Working temperature range | at least 5 °C above room temperature up to 300 °C |
| Temperature setting accuracy | up to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C |
| Temperature sensor | Pt100, DIN Class A, 4-wire measurement |
| Internal volume | 108 l |
| Internal dimensions (W x H x D) | 560 x 480 x 400 mm |
| External dimensions of the housing (W x H x D) | 745 x 864 x 584 mm |
| Net weight | approx. 74 kg |
| 230 V connection | 50/60 Hz, approx. 2,800 W |
| 115 V connection | 50/60 Hz, approx. 1,800 W |
| Maximum number of shelves | 5 |
| Shelves included in the scope of delivery | 2 |
| Max. load on the unit | 175 kg |
| Maximum load per shelf | 20 kg |
| Interior materials | Stainless steel, 4-sided all-round heating |
| Housing material | Textured stainless steel, galvanised sheet steel rear panel |
| Control | ControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphics display |
| Timer | 1 minute to 99 days, digital countdown clock |
| Permissible ambient temperature | 5 °C to 40 °C |
| Permissible humidity | max. 80 % relative humidity, non-condensing |
| Maximum installation altitude | 2,000 m |
| Labelling | CE, EAC, UL test mark |
Scope of delivery
- 1x Memmert UN110 universal oven
- Factory calibration certificate (calibration at 160 °C)
- Fully insulated stainless steel doors with a 2-point locking system (compression door lock)
- 2x stainless steel grid shelves, electropolished
Regulatory information
The Memmert UN110 universal oven is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.
Installation in a wall opening
For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29734) or without air slots (B29735). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.
Individual requirements and procurement service
The UN110 is available with, amongst other features, full-view glass doors, interior lighting and a power socket, a levelling or mobile base frame, reinforced grid shelves and perforated trays, as well as a gas-tight version with various pipe feed-throughs. A USB-to-Ethernet adapter and AtmoCONTROL software licences are available for data acquisition. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request. Do you require any of these accessories or assistance in selecting the right universal oven for your application? Through our procurement service, we are happy to assist you with procurement and configuration.
| Certification marks: | GS (VDE) |
|---|---|
| Volume: | 108 l |