IKA R 50 High-speed Stirring Shaft, Dissolver Disc, for T 50 digital, 0001689300
€1,979.25
% Manufacturer's RRP: €2,639.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA R 50 High-speed Stirring Shaft, Dissolver Disc, for T 50 digital, 0001689300"
With the R 50 stirring shaft (0001689300), the T 50 digital disperser becomes a high-speed stirrer. The shaft is fitted with a dissolver disc and is suitable for batches ranging from 0.25 to 30 l. IKA classifies it as suitable for applications requiring medium to high shear forces.
Conversion of the T 50 digital
IKA describes the stirring shaft as a conversion kit that transforms the T 50 digital disperser into a high-speed stirrer. The drive remains the same, but the mixing element at the lower end of the shaft is different. The applications involve medium to high shear forces, specifically rapid mixing, dissolution and deagglomeration.
Dissolver and safety cage
The R 1402 dissolver is included in the scope of delivery. A safety cage is fitted around the mixing element to ensure workplace safety. The permissible speed is 10,000 rpm. The immersion depth ranges from 50 to 180 mm, and the installation length is 323 mm.
Materials and limits
Materials in contact with the product are AISI 316L and AISI 304. The shaft is suitable for solvents and abrasive substances; the pH range is from 2 to 13. The maximum operating temperature is 150 °C. Dry running is permitted. The weight is 1.25 kg.
Propeller design for lower shear
IKA lists the R 1405 propeller design as an optional retrofit for the mixing head. It is intended for low to medium viscosity at low shear rates.
Alternative with rotor and stator
Those wishing to use the T 50 digital with stator geometry will find the S 50 N - G 45 F suitable for volumes of 0.25 to 10 l, or the S 50 KD - G45G for volumes of 0.5 to 20 l.
Typical applications
- Rapid mixing and dissolution
- Deagglomeration
- Applications involving medium to high shear forces
- Batches from 0.25 to 30 l
- Working with solvents
Technical details
| Working range (H2O) | 0.25 to 30 l |
|---|---|
| Rotor diameter | 40 mm |
| Max. permissible speed | 10,000 rpm |
| Immersion depth | 50 to 180 mm |
| Installation length | 323 mm |
| Materials in contact with the product | AISI 316L, AISI 304 |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Suitable for abrasive substances | Yes |
| Max. operating temperature | 150 °C |
| Dry operation | Yes |
| Protective cage | Fitted around the mixing element |
| Weight | 1.25 kg |
Scope of delivery
- 1 x IKA R 50 high-speed stirring shaft
- 1 x Dissolver R 1402
- The T 50 digital drive is not included in the Scope of delivery.
Individual requirements and procurement service
We can source the T 50 digital drive, the R 1405 propeller version and other accessories on request. The procurement service will put together the appropriate combination.