Skip to main content Skip to search Skip to main navigation

IKA S 50 N - G 45 F Dispersing Tool, Ø 45 mm, for T 50, 0008003900

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 N - G 45 F Dispersing Tool, Ø 45 mm, for T 50, 0008003900"

With a stator diameter of 45 mm and an installation length of 290 mm, the S 50 N - G 45 F (0008003900) is designed for applications involving volumes in the litre range: the tool processes 0.25 to 10 l of water on the T 50 digital ULTRA-TURRAX. It weighs 0.929 kg, and the immersion depth ranges from 70 to 250 mm.

Rotor, gap and final fineness

The rotor has a diameter of 40 mm, the gap to the stator measures 0.5 mm, and the peripheral speed is a maximum of 20.9 m/s. Final particle sizes of 10 to 30 µm are achieved for suspensions and 1 to 10 µm for emulsions. By way of comparison: the S 50 KG - HH - G 45 G specifies 40 to 100 µm, whilst the S 50 KG - HH - G 45 M specifies 25 to 50 µm for suspensions.

Principle and limitations

As with all ULTRA-TURRAX tools, the rotor draws in the medium and forces it radially through the slots in the stator. The shearing effect depends on the gap and the circumferential speed; for the S 50 N - G 45 F, these are 0.5 mm and up to 20.9 m/s.

Bearings and materials

The shaft runs in a PTFE slotted ring bearing. The materials in contact with the product are PTFE and AISI 316L. The tool is suitable for solvents and abrasive substances; the pH range is from 2 to 13. Temperatures of up to 180 °C are permissible for short periods, and it can be sterilised using all methods.

When another S-50 tool makes sense

The ball bearing versions with a carbide mechanical seal allow for vacuum down to 1 mbar and pressure up to 6 bar. The S 50 KD - G 45 G ST is available as an autoclavable version with ball bearings.

Typical applications

  • Dispersing and emulsifying on a scale of 0.25 to 10 l
  • Media containing solvents in the pH range 2 to 13
  • Batches containing abrasive solids
  • Processing of the tool between runs using all sterilisation methods

Technical details

Working range (H2O)0.25 to 10 l
Stator diameter45 mm
Rotor diameter40 mm
Stator/rotor gap width0.5 mm
Maximum circumferential speed20.9 m/s
Immersion depth70 to 250 mm
Installation length290 mm
Bearing and sealShaft in PTFE slotted ring bearing
Materials in contact with the productPTFE, AISI 316L
pH range2 to 13
Suitable for solventsYes
Suitable for abrasive substancesYes
Max. operating temperature180 °C
Sterilisabilityall methods
Final particle size of suspensions10 to 30 µm
Final particle size of emulsions1 to 10 µm
Weight0.929 kg

Scope of delivery

  • 1 x IKA S 50 N - G 45 F dispersing tool (single tool)

The T 50 digital drive is not included in the scope of delivery.

Individual requirements and procurement service

For a second drive unit, a different version of the tool, or enquiries regarding compatibility with your existing equipment, please contact our procurement service.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP