Skip to main content Skip to search Skip to main navigation

IKA S 50 KG - HH - G 45 M Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008003500

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 KG - HH - G 45 M Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008003500"

The final fineness of the S 50 KG - HH - G 45 M (0008003500) ranges from 25 to 50 µm for suspensions and from 5 to 20 µm for emulsions. With a 40.5 mm rotor in a 45 mm stator, the difference compared with the sister tool, the S 50 KG - HH - G 45 G, is clearly evident: There, the particle sizes range from 40 to 100 µm and 10 to 30 µm, whilst the working volume extends to 20 l instead of 15.

Geometry and rotational speed

The rotor draws in the medium and forces it radially through the stator slots. With a rotor diameter of 40.5 mm, the peripheral speed reaches 21.2 m/s; the G tool, with a 36 mm rotor, achieves 18.8 m/s. The immersion depth is 70 to 250 mm, the installation length is 300 mm, and the tool weighs 0.52 kg. Working range 0.5 to 15 l, compatible with the T 50 digital drive.

Ball bearing and carbide seal

The shaft is mounted on ball bearings; the single-acting mechanical seal consists of carbide against carbide. Operation under vacuum down to 1 mbar and at pressures up to 6 bar is possible. Materials in contact with the product are FFPM, tungsten carbide (WC) and AISI 316L; the tool is solvent-resistant. The pH range is 2 to 13, the short-term operating temperature is up to 150 °C, and it can be sterilised using wet chemical methods.

Alternatives in the S-50 range

The S 50 N - G 45 F (0.25 to 10 l), which operates without the need for a vacuum, features a PTFE slotted ring bearing and achieves a particle size of 10 to 30 µm for suspensions and 1 to 10 µm for emulsions. The autoclavable ball-bearing version is the S 50 KD - G 45 G ST (0.5 to 20 l, up to 10,000 rpm).

Typical applications

  • Dispersing and emulsifying 0.5 to 15 l
  • Operations under vacuum down to 1 mbar
  • Processes involving solvents
  • Applications requiring final particle sizes of 5 to 20 µm in emulsions

Technical details

Working range (H2O)0.5 to 15 l
Stator diameter45 mm
Rotor diameter40.5 mm
Maximum circumferential speed21.2 m/s
Immersion depth70 to 250 mm
Installation length300 mm
Bearing and sealBall bearing, single-acting mechanical seal (carbide/carbide)
Materials in contact with the productFFPM, WC / AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
Sterilisabilitywet chemical
Vacuum1 mbar
Max. pressure6 bar
Final fineness of suspensions25 to 50 µm
Final fineness of emulsions5 to 20 µm
Weight0.52 kg

Scope of delivery

  • 1 x IKA S 50 KG - HH - G 45 M dispersing tool (single tool)

The T 50 digital drive is not included in the scope of delivery.

Individual requirements and procurement service

Do you also need the drive unit, a replacement tool or help choosing between the different models? We source the components via our procurement service and tailor them to your specific requirements.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP