IKA S 50 KG - HH - G 45 G Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008003200
€4,113.75
% Manufacturer's RRP: €5,485.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 50 KG - HH - G 45 G Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008003200"
The S 50 KG - HH - G 45 G (0008003200) can process up to 20 l of water in a single batch; the minimum volume is 0.5 l. The shaft is mounted on ball bearings; the single-acting mechanical seal consists of carbide against carbide, and operation under vacuum is possible. The T 50 digital serves as the drive.
Seal and pressure range
The carbide seal and the design allow for vacuum down to 1 mbar and pressure up to 6 bar. Materials in contact with the product are FFPM, carbide (WC) and AISI 316L. The tool is solvent-resistant, with a pH range of 2 to 13. It can be sterilised using wet chemical methods, and the short-term operating temperature is up to 150 °C.
Dimensions and fineness
The rotor draws in the medium and forces it radially through the stator slots. With a rotor diameter of 36 mm and a circumferential speed of up to 18.8 m/s, these figures are lower than those of the S 50 N - G 45 F, which has a diameter of 40 mm and a speed of 20.9 m/s. The stator measures 45 mm. The immersion depth is 70 to 260 mm with an installation length of 300 mm; the unit weighs 0.552 kg. The final fineness is between 40 and 100 µm for suspensions and between 10 and 30 µm for emulsions.
Comparison within the S-50 series
The S 50 KG - HH - G 45 M has the same design, but processes only 0.5 to 15 l and specifies narrower final fineness ranges of 25 to 50 µm (suspensions) and 5 to 20 µm (emulsions). Those working without a vacuum who wish to achieve finer dispersion will find the S 50 N - G 45 F, with PTFE bearings, suitable for 10 to 30 µm.
Typical applications
- Dispersing and emulsifying volumes of 0.5 to 20 l
- Operations under vacuum down to 1 mbar
- Solvent-based processes
- Processes at pressures up to 6 bar
Technical details
| Working range (H2O) | 0.5 to 20 l |
|---|---|
| Stator diameter | 45 mm |
| Rotor diameter | 36 mm |
| Max. circumferential speed | 18.8 m/s |
| Immersion depth | 70 to 260 mm |
| Installation length | 300 mm |
| Bearing and seal | Ball bearing, single-acting mechanical seal (carbide/carbide) |
| Materials in contact with the product | FFPM, WC / AISI 316L |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 150 °C |
| Sterilisability | wet chemical |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Final fineness of suspensions | 40 to 100 µm |
| Final fineness of emulsions | 10 to 30 µm |
| Weight | 0.552 kg |
Scope of delivery
- 1 x IKA S 50 KG - HH - G 45 G dispersing tool (single tool)
The T 50 digital drive is not included in the scope of delivery.
Individual requirements and procurement service
Would you like the tool supplied together with the appropriate drive unit, a second tool for changing, or guidance on selecting the correct geometry? We will put together the right combination for your application via our procurement service.