Skip to main content Skip to search Skip to main navigation

IKA S 50 KD - G45G Dispersing Tool, Ø 45 mm, Ball Bearings, for T 50, 0010000629

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 KD - G45G Dispersing Tool, Ø 45 mm, Ball Bearings, for T 50, 0010000629"

The operating range of the S 50 KD - G45G (0010000629) is from 0.5 to 20 l of water. The tool has a stator diameter of 45 mm and a rotor diameter of 36 mm; the gap is 0.5 mm. It is operated on the T 50 digital drive.

Ball bearing with PTFE seal

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. Materials in contact with the product are FFPM, PTFE and AISI 316L. The tool is suitable for solvents; the pH range is from 2 to 13. The maximum operating temperature is 150 °C; it may be used under vacuum down to 100 mbar. IKA specifies the tool as autoclavable; the ball bearing is excluded from sterilisation.

Dimensions and fineness

The immersion depth is between 70 and 260 mm; the installation length is 300 mm. At a maximum of 10,000 rpm, the circumferential speed at the rotor reaches 18.8 m/s. The final fineness ranges from 40 to 100 µm for suspensions and from 10 to 30 µm for emulsions. The tool weighs 0.9855 kg.

Suitable drive

IKA names the T 50 digital as the drive for this tool. At 18.8 m/s, the circumferential speed is lower than the 20.9 m/s of the S 50 N - G 45 F, which has a 40 mm rotor.

Differences from similar models

The S 50 KG - HH - G 45 G operates within the same working range and has the same rotor dimensions. It features a carbide mechanical seal and is designed for vacuums down to 1 mbar and pressures up to 6 bar. For finer results with a narrower gap of 0.25 mm and a working range of 0.5 to 15 l, the S 50 KD - G45M is available.

Typical applications

  • Dispersing and emulsifying in batches of 0.5 to 20 l
  • Operations under vacuum down to 100 mbar
  • Batches containing solvents
  • Batches where the tool is autoclaved

Technical details

Working range (H2O)0.5 to 20 l
Recommended working range500 to 20,000 ml
Stator diameter45 mm
Rotor diameter36 mm
Stator/rotor gap width0.5 mm
Max. permissible speed10,000 rpm
Maximum circumferential speed18.8 m/s
Immersion depth70 to 260 mm
Installation length300 mm
Bearing and sealBall bearing with PTFE seal and FFKM O-ring
Materials in contact with the productFFPM, PTFE, AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
SterilisabilityAutoclavable
Vacuum100 mbar
Final particle size of suspensions40 to 100 µm
Final particle size of emulsions10 to 30 µm
Weight0.9855 kg

Scope of delivery

  • 1 x IKA S 50 KD - G45G dispersing tool (single tool)
  • The T 50 digital drive is not included in the Scope of delivery.

Individual requirements and procurement service

We can source the T 50 digital drive, a second tool for changing, or advice on geometry on request. The procurement service will put together the right combination for your application.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP